Alde Compact 3010 User manual

Quick start GuiDE - compact 3010
GB
In standby, the functions which are activated in the
boiler are shown, and there is no background lighting
in the display. The control panel automatically goes to
standby from the on position after two minutes if no
buttons are pushed or if you step to standby (left of
On/Off) with the arrow keys.
Start the on position by pressing any button.
The background lighting comes on (blue light) and
a function that can be set ashes. Select a function
that can be set with the arrow keys. The settings are
automatically saved.
1. The standby and on-position of the control panel
6. Heating with gas
7. Heating with electricity
8. Circulation pump
9. 230V connectiong
10. Temperature
11. Resetting the system
1. The standby and on-position of the
control panel
2. Start the heater
3. Switch off the heater
4. Set the temperature you want in
the vehicle
5. Warm water
Working with the lower menu row, see operating/installation instruction
for Compact 3010
2. Start the heater
1Press the button with the arrow
until “Off” (main breaker) in the
display ashes.
2Press the +/On button.“On”
(main breaker) in the display
ashes.
3The settings are ready.“On”
(main breaker) is shown in the
display when the panel returns to
standby.
blinkar
blinkar
Start the heating in the caravan with the settings last
used.
If you break the power to the heater, the settings which
were last used will automatically be used when the
power comes back on.
ashes ashes

3. Switch off the heater
1Press the button with the arrow
until “On” (main breaker) in the
display ashes.
2Press the -/Off button. “Off” (main
breaker) in the display ashes.
3The settings are ready. “Off”
(main breaker) is shown in the
display when the panel returns to
standby.
blinkar
blinkar
ashes ashes
4. Set the temperature you want in the vehicle
1Press the button with the arrow
until the symbol for selecting
temperature ashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
2Increase the temperature by
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the temperature
at 25.0°C.
3The settings are complete and
the boiler is working at the set
temperature.
blinkar
blinkar
The temperature of the vehicle can be set from +5°C to
+30°C at intervals of 0.5°C.
ashes ashes
5. Warm water
1Press the button with the arrow
until the symbol for selecting
warm water ashes. The
“OFF” text is shown next to the
temperature on the display.
2Switch the warm water on by
pressing the +/ON button.
The “ON” text is shown next to
the temperature on the display.
3The warm water symbol is
displayed when the panel returns
to standby.
blinkar
blinkar
If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you have
selected more warm water, the circulation pump stops.
1Press the button with the arrow
until the warm water symbol
ashes. The “ON” text is shown
next to the temperature on the
display.
2Switch off the warm water by
pressing the -/Off button.
The “OFF” text is shown next to
the temperature on the display.
3The warm water symbol goes
out when the panel returns to
standby.
blinkar
blinkar
If you want you can switch off more warm water before
30 minutes have elapsed.
ashes ashes
ashes ashes

7. Heating with electricity
1Press the button with the arrow
until the electrical heating symbol
ashes. The “OFF” text is shown
next to the temperature on the
display.
2Select power (1kW, 2kW or 3kW)
with the +/On or -/Off buttons.
The diagram shows that 3kW
power has been selected (some
boilers are only equipped with
1-2kW).
3The electrical heating symbol is
shown when the panel returns to
standby.
blinkar
To activate heating with electricity. The greater the power the more rapid the heating will be.
1Press the button with the arrow
until the electrical heating symbol
ashes.
2Switch off the electrical heating
by pressing the -/Off button until
all power steps have gone out.
The “OFF” text is shown next to
the temperature on the display.
3The electrical heating symbol
goes out when the panel returns
to standby.
blinkar
Do as follows to switch off heating with electricity.
blinkar
ashes ashes
ashes
6. Heating with gas
1Press the button with the arrow
until the gas heating symbol
ashes. The “OFF” text is shown
next to the temperature on the
display.
2Select gas heating by pressing
the +/On button. The “ON” text is
shown next to the temperature
on the display.
3The gas heating symbol is
displayed when the panel returns
to standby.
blinkar
blinkar
Do as follows to activate heating with gas.
ashes ashes
1Press the button with the arrow
until the gas heating symbol
ashes. The “ON” text is shown
next to the temperature on the
display.
2Switch off the gas heating by
pressing the -/Off button. The
“OFF” text is shown next to the
temperature on the display.
3The gas heating symbol goes
out when the panel returns to
standby.
blinkar
blinkar
Do as follows to switch off the gas heating.
ashes ashes

V-3010 02 070424 GB
Alde International Systems AB
Wrangels allé 90 • Box 11066 • S-291 11 Färlöv • Sweden
Tel [phone] • Fax [phone] • www.alde.se • [email protected]
Working with the lower menu row, see operating/installation instruction
for Compact 3010
The lower menu row can be used for such things as setting the clock, external start, night temperature, automatic
start of the heater.
8. Circulation pump
This symbol is displayed when the circulation pump is operating (12V-
pump or 230V-pump).
When heating is required in the vehicle, the pump starts automatically.
The boiler selects the 230V pump if one is installed in the system. When
the 230V is disconnected from the vehicle the 12V pump is automatically
selected. The symbol will light up even if the pump is defective.
9. 230V connection
This symbol lights up when 230V is connected to the
vehicle.
10. Temperature
This symbol shows the indoor temperature
in the caravan in intervals of 0.5°C.
This symbol shows the temperature outside the
caravan in intervals of 1°C. To use this function an
outdoor temperature sensor must be installed.
11. Resetting the system
1Press the Store/Reset button for
10 seconds. The control panel is
reset to the factory setting.
2The main breaker to the control
panel is in the “Off” position,
Gas is on, Electricity at 1kW and
22°C.
The pump is in automatic
position. The lower menu row is
not lit up.