Alead AMICRX5C2XXX User manual
BLUETOOTH WIRELESS
Microphone & Receiver Set
P/N AMICRX5C2XXX
USER GUIDE
Declaration of Conformity: We declare that product
AMICRX5C2XXX
conforms to the R&TTE Directive 1999/5/RC.
.
R
E
C
E
I
V
E
R
M
I
C
R
O
P
H
O
N
E
FCC ID:TNZNSRX3C2XXX
0678
GETTING STARTED
Unpack the package carefully and confirm that you
have all of parts as shown below.
INTRODUCTION
The Microphone & Receiver Set (MICRX2) allows
capturing the source of audio wirelessly and freely
with MIC2 wireless microphone. This wireless
Microphone & Receiver provides the unique low
latency to allow user to have well listening or
recording remote voice without delayed.
USB charging
cable X2
Receiver(RX2)
3.5mm TRRS
audio cable
Microphone
(MIC2)
Please check the contents carefully and contact
your local dealer immediately if anything is missing
or damaged.
PRODUCT OVERVIEW
See image below. Please note some models will
differ slightly in style, colour and the functionality
may vary according to their specifications.
(RX2)
Mic
Clipper
On/Off
/Volume Button
3.5’ Audio
Jack
USB Charging
Connector
LED
(MIC2)
Mic
Clipper On/Off
/VolumeButton
USB Charging
Connector
LED
CHARGING
Before using the MIC2 and RX2, you must charge
both for approximately 2 hours. After fully charged,
the battery provides up to 6 hours of vocie talk time
and up to 100 hours of standby time .
Plug USB charging cable into MIC2 and RX2 mini
USB connector. Plug the other side of USB
charging cable into a powered USB connector.
When charging, the amber LED will be lighted.
When charging is completed, the amber LED will be
turn off or dim.
or
TURN ON AND PAIRING
You need to pair both MIC2 and RX2 when both
first time to use together.
2. On RX2, press and hold
the ON/OFF button for 2
seconds until blue LED
blinking quickly.
3. Both MIC2 and RX2 will pair and connect each
other automatically. The blue LED of both devices
will change to flash slowly (approx once every two
seconds) after completed paring and connecting.
1. On MIC2, press and hold
the ON/OFF button for about
2 seconds until blue LED
blinking quickly.
MIC2 type A
pairing mode
The MIC2 supports two pairing modes. The type
A and type B pairing mode have different LED
indication. Please ensure you are using type A
pairing mode during pairing with RX2.
※
TURN OFF
(RX2)(MIC2)
Press and hold the ON/OFF button for about 2
seconds, the amber LED on MIC2 and RX2 will
stay on for about 1 second and then device will
be turn off，release the ON/OFF button.
B
A
Type A mode
Switch to desired Type A mode
Select the type A mode
by slide A/B mode
switch before turn on
Microphone.
“Listener”
RX2
“Speaker”
MIC2
voice
OPERATION
Using for remote voice and commuicaiton
Fit 3.5mm plug audio cable to RX2,
Plug your 3.5mm audio plug of audio cable into
the RX2’s audio jack and another side connects
to “Audio In” of your audio speaker, home
stereo, car stereo, PA systems, voice recorder
or headphone. Then, you can listen and enjoy
audio or voice wirelessly.
After connected with the MIC2, RX2 will
receive the audio or voice wirelessly.
Using for listening or recording remote voice
Connect to audio output of RX2 to speakers or
iPad/iPhone to listen or record remote voice
wirelessly.
“Receiver”“Tansmitter”
MIC2
RX2
camcorder
audio or voice
iPhone
Speaker
Tablet
PC
R
E
C
E
I
V
E
R
PA systems
Put MIC2 microphone close to the sound
source within 8 inches to captured the best
sound quality.
Adjusting the MIC2 microphone gain
To increase the microphone gain
While speaking, click the ON/OFF button once
to increase the microphone gain by one step.
Repeat this procedure until you reach the
desired level.
To decrease t
he microphone gain
While speaking, quick click the ON/OFF button
two times continuously to decrease the
microphone gain by one step. Repeat this
procedure until you reach the desired level.
max. 20cm
8 inches
Too far away
To increase the audio volume
While listening audio, click the ON/OFF button
once to increase the volume by one step. Repeat
this procedure until you reach the desired level.
To decrease the audio volume
While listening audio, quick click the ON/OFF
button two times continuously to decrease the
volume by one step. Repeat this procedure until
you reach the desired level.
Adjusting the RX2 audio volume
Reduce audio delay with FastStream
The MIC2 and RX2 support low latency audio with
FastStream.
VISUAL INDICATION
The POWER/MODE/AUDIO LED can also indicate
the status of MIC2 and RX2 working statues.
Statues Indication
Charging amber LED is on
Not Connected
Power On
Power Off
MIC2 and RX2
in pairing mode
blue LED flash
blue LED
low speed
flash, approx. every
5 seconds
blue
LED
flash
quickly
Connected blue LED
middle
speed flash
amber LED flash
once
TROUBLESHOOTING
MIC2 and RX2
were
out of range for more
than 30 seconds.
Switch both
MIC2 and
RX2 off
and switch on
again to reconnect or
press button on
microphone to
reconnect.
MIC2 and RX2
does
not reconnect.
Lost Connection.
blue LED flashes at
5 second intervals.
MIC2 can not pair
with RX2
Ensure both devices
are within 10m
distance range and
MIC2 using in type A
mode.
Likely Cause / Solution
Problem
CUSTOMER SERVICE INFORMATION
For other Alead or Nolan Bluetooth products
or support, please view our website –
www.aleadinc.com, www.nolan-sys.com or
or contact your local representative.
ENVIRONMENT
Do not throw this electrical device away with the
normal household waste at the end of its life, but
hand it in at an official collection point for recycling.
By doing this you will help to preserve the environ-
ment.
DISCLAIMER
Whilst every effort has been made to ensure that
the information in this manual is accurate and
complete, no liability will be accepted for any errors
and/or omissions made. The manufacturer
reserves the right to make changes and improve-
ments to the specifications and features of the
hardware and firmware of the products described in
this document without prior notice. Reproduction,
transfer, distribution or storage of part or all of the
contents in this document in any form is prohibited
without prior permission of the manufacturer. All
trademarks acknowledged.
Table of contents
Other Alead Microphone manuals
