Alemlube P50 User manual

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
1
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
Uses Diesel and water transfer
Engine Type OHV 4 stroke, Air Cooled
Maximum Flow Rate 600 L/min
IMPORTANT
Please make certain that persons who are to use this equipment thoroughly read and understand these instructions
and any additional instructions provided prior to operation.
NOTE
No refund or exchange once petrol is placed into the fuel tank. Warranty registration must be complete within 30 days of purchase
with proof of purchase.
Description
The Alemlube P50 petrol driven 2" transfer engine pump is specifically designed and manufactured for the transfer of diesel
and water. Mounted in a robust tubular steel roll frame with rubber feet the P50 is completely portable, suits many industrial,
workshop,agricultural, municipal, marine services and on site applications including construction site dewatering and is capable of
transferring up to 600 litres of diesel fuel or water per minute.
Driven by a powerful OHV 4 stroke air cooled petrol engine this lightweight die-cast aluminium pump with 2" diameter inlet & outlet
ports operates efficiently with a maximum suction head of 8 metres and a maximum lift head of 28 metres.
Always ready to perform tank filling, diesel or water transfer the P50 has a 3.6L fuel tank capacity with a manual starting system.
Specifications
March 2021

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
2
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
1. INSTALLATION AND OPERATION 3
1.1. INS TA LL ATIO N 3
1.2. SAFE OPERATION 3
2. BEFORE STARTING 4
3. STARTING THE ENGINE 5
4. STOPPING THE ENGINE 6
5. TROUBLE SHOOTING 7
6. MAINTENANCE 8-9
7. PROHIBITED OPERATION MESSAGE 10
8. STORAGE AND TRANSPORTATION 10
TABLE OF CONTENTS

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
3
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
1. Installation
Install the pump on an even surface in a well ventilated place
Do not install more than 7m above stored diesel or water supply
Install a lter in the inlet pipe
1.1. Safe Operation
Do not operate in a conned or badly ventilated place or near to ammable liquids
Filling fuel, stop engine
Filling fuel, do not smoke
Filling fuel, do not splash fuel
CAUTION
NO FOR USE INDOORS
KEEP AWAY FROM FLAMMABLE MATERIAL
NO!
STOP ENGINE
WHEN REFUELING NO SMOKING!
NO NOT SPILL
WHEN REFUELLING
INSTALLATION & OPERATION
SAFETY

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
4
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
1.CONNECT THE HOSE
1.Insert
2.Tighten
3.Insert
4.Tighten
5.Screw in
4
2.FILL PRIMING DIESEL OR WATER
1.Remove cap 2. Fill with diesel or water 3. Replace cap
BEFORE STARTING
2.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
5
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
1.ON 2.OPEN
1.ON
3.CLOSE 4.ON
5.FULL
6.OPEN 7.FULL
STARTING THE ENGINE
3.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
6
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
1.POSITION
2.OFF 3.OFF
STOPPING THE ENGINE
4.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
7
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
ENGINE WILL NOT START
1.CHECK FUEL
2.CHECK SPARK
1.Remove
& check
spark plug
WILL NOT PUMP
1.Check priming 2.Check strainer
for clogging
3.Check that the
suction pipe is airtight
1.Check hose clamps
2.Check hose
for damage
TROUBLE SHOOTING
5.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
8
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
CHECK OIL BEFORE STARTING
SAE 10W .30 OR
EQUIVALENT MOTOR OIL
SAE 10W-30
CHANGE THE OIL AFTER THE
FIRST MONTH OR AFTER 20
HOURS. WHICH EVER COMES
FIRST. AFTER THIS, EVERY 6
MONTHS OR 100 HOURS.
WHICH EVER COMES FIRST.
DRAIN FILL 0.6L
SPARK PLUG
ENGINE TROUBLE
REMOVE PLUG CLEAN
ADJUST GAP
0.7-0.8mm
MAINTENANCE
6.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
9
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
MAINTENANCE
13
AIR CLEANER TROUBLE WASH---DRY
KEROSENE
SOAK---SQUEEZE
ENGINE OIL
SPARK PLUG
ENGINE TROUBLE
REMOVE PLUG CLEAN
ADJUST GAP
0.7-0.8mm

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
10
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
7.1 Before adding oil, stop operating the engine
7.2 Suitable only for the transfer of clean diesel fuel or clean water
7.3 Do not transfer contaminated uid
7.4 Not to be used for draining mud
7.5 Atmospheric temperature can’t be less than 0℃ or more than 40ºC
7.6 Engine should be stopped immediately when the temperature is beyond this temperature range
7.7 Warranty does not cover damage caused by faulty operation
PROHIBITED OPERATING MESSAGE
7.
8.1 Store in clean, dry place
8.2 Drain fuel and oil before storing the pump
STORAGE
8.

Visit our website at www.alemlube.com.au or www.alemlube.co.nz
NSW/ACT
TEL: [phone]
FAX: [phone]
QLD/PNG
TEL: [phone]
FAX: [phone]
VIC/ TAS
TEL: [phone]
FAX: [phone]
WA
TEL: [phone]
FAX: [phone]
SA/NT
TEL: [phone]
FAX: [phone]
NZ
TEL: [phone]
FAX: [phone]
11
Petrol Driven 2"
Diesel & Water Transfer Engine Pump
OWNER’S TECHNICAL MANUAL
P50
Part Number Description
P50-01 Pump Cover
P50-02 Cover Gasket
P50-03 Mechanical Seal
P50-04 Impeller
P50-05 Volute Casing
P50-06 Volute Casing Gasket
P50-07 Pump Hosing
Part Number Description
P50-08 Discharge Flange
P50-09 Pip Connector
P50-10 Nut Connector
P50-11 Discharge Flange
P50-12 Priming Plug
P50-13 ORing Plug
P50-14 Bolt M8*20
Part Number Description
P50-15 Inlet Valve Gasket
P50-16 Inlet Flange
P50-17 Bolt M8*20
P50-18 Bolt M8*25
P50-19 Gasket
P50-20 Nut
P50-21 Rubber Feet
P50-22 Feet Gasket
Ordering Spare Parts
Parts List – Part No. P40
P50-09 P50-10
P50-15
P50-16
P50-17
P50-18
P50-14
P50-13
P50-12 P50-11
P50-10 P50-09
P50-08
P50-07
P50-06
P50-05 P50-04 P50-03 P50-02 P50-01
P50-19
P50-20
P50-21
P50-22