Alera ALE-ET4017 User manual

4.3.
1.
5. 6.
1 PC
A.
1 PC
B.
1 PAIR
C.
1 PC
D.
5 PCS
E.
1 PC
F.
1 PC
G.
2 PCS
H.
F
E
D
B
ALE-ET4017
Manufactured for/ Hecho para/ Fabriqué pour Alera / USSCo,
1 Parkway North, Suite 100, Deerfield, IL 60015 ©2013 USSCo
Made in/ Hecho en/ Fabriqué en China
®
Product support and parts: 1-800-733-4000
Ayuda del producto y partes / Support technique et pieces
A
B
H
2.
B
G
C
This stopper must be
properly inserted by
pressing.
This stopper must be
properly inserted by
pressing.
04-013/3

Model: ALE-ET4017
OPERATING INSTRUCTIONS
A.Seat height adjustment
To raise the seat height, stand up from
the chair while lifting the lever (A) under
the right side of the seat. To lower the
seat height, lift the lever (A) while sitting
in the chair.
A
B.Seat angle adjustment
Push the lever (B) upward. Leaning back
will cause the chair seat to tilt backwards.
To lock the chair seat in the upright or
vertical position, sit upright and push the
lever (B) downward.
B
E. Arm height adjustment
To adjust arm height, push the button
on the outside of each arm and move
the arm up or down. Release the button
to set the height.
G. Backrest height adjustment
D. Tilt tension
D
C. Back angle adjustment
Push the lever (C) upward. Leaning back
will cause the chair back to tilt backwards.
Push the lever (C) downward. To lock the
chair back in the upright, vertical position
or sit upright.
C
F. Sliding seat adjustment
Push the lever (F) upward to allow seat to
slide forward or backward. Release handle
to lock in desired seat position
FG
H. Arm width adjustment
To adjust arm width, loose the switch underneath
seat pan on both sides of chair arms. Tighten the
switch to fix the width of armrests.
Raise or lower adjust lumbar support component so that
support is at the correct position for the user's back.
I.Lumbar support adjustment
Loose the knob (G) by turning left, then
raise the back to desired position, When
turn the knob (G) right to tighten the back.