Alfa Network Blue&me User manual

ALFA
MESSAGE READER
INSTALLATION
SERVICE

1. Enter the Blue&Me ™ portal from the
official ALFA ROMEO web site and down-
load the .zip file containing the Messa-
ge Reader application package to be in-
stalled on Blue&Me ™ .
2. Open the .zip file downloaded from the
Blue&Me
™ portal, you are recom-
mended to extract it to a dedicated fol-
der (ex.:. c:\Blue&Me).
3. From extracted files, copy into a pre-
viously formatted USB storage device
the following files:
❒ install.inf
❒ SMS_Reader.ARM920.CAB
4. The USB storage device will therefore
contain these two files:
❒ install.inf
❒ SMS_Reader.ARM920.CAB
5. Connect the USB storage device to the
Blue&Me
™ USB port in the car (glo-
ve compartment, see the picture).
6. Fit the electronic key into the ignition de-
vice.
7. Blue&Me
™ will show on the instrument
panel display the message “UPDATE IN
PROGRESS” and it will say “update
started” (failing this procedure, remo-
ve the electronic key from the ignition de-
vice and then refit it).
WARNING No control button on the stee-
ring wheel shall be pressed during the up-
date procedure.
8. When update is completed,
Blue&Me ™ will show on the instru-
ment panel display the message
“UPDATE COMPLETE” and it will
say “update complete, please re-
move the USB memory“.
9. Press button
£
and then use buttons
▲/▼ to find the menu option “MES-
SAGE READER” in the Blue&Me ™
Main Menu.
Repeat the above procedure right
from the start if the option “MES-
SAGE READER” is not present in
the Blue&Me™ Main Menu
(performed procedure was unsuc-
cessful).
II
IINN NNSS SSTT TTAA AALL LLLL LLAA AATT TTII IIOO OONN NN PP PPRR RROO OOCC CCEE EEDD DDUU UURR RREE EE
QUALITY
ASSISTENZA TECNICA - INGEGNERIA ASSISTENZIALE
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Fiat Auto S.p.A. - Pubblication n° 60431663
1
st
Edition - 07/2006
Reserved property. Reproduction, even only in part is prohibited
without permission, in written form, of Fiat Auto S.p.A.
SERVICE
USB port