Alfa Network WiFi CampPro Kit User manual

Alfa_WiFi CampPro_Kit Setup Guide
Read entire Guide before begin with setup
Install Devices as shown below and then connect 110V AC or 12 volt DC Adapter to the
power source.

Configuring with a Computer
1. Connect the Rj45 (Network) cable to the computer and other end into the LAN port on
the R36
2. Open a Web page using Internet Explorer, Google Chrome, or Firefox and type:
http://192.168.2.1 (or 192.168.2.1) in the address bar and press "Enter"
If you cannot reach the setup page, restart the Computer, if you use a Laptop, you may
need to disable Wifi Radio temporarliy.
Configuring with a Phone or Tablet
1. Find and connect to the Wifi Network "ALFA_AP".
2. Open a Web page using the Internet Browser or Google Chrome and type:
http://192.168.2.1 (or 192.168.2.1) in the address bar and press "Enter"
Note: During configuration, when CampPro restarts, make sure that your phone or tablet
is always connected to the network "ALFA_AP"
With either one, this window must appear to continue the Configuration
Enter admin in both boxes, click OK
Click on "Camp-Pro Setup" or “Change Profile” and follow the instructions in pictures.

Click on « Site Survey »
Select The Wi-Fi Network you want to connect to (Do Not select “ALFA_AP”, your own
Network) Signal Strenght: (-20)= very Strong (-70)weak

Enter the Password (Security ey) in the "pass phrase" box and click "Next"
If you connect to an unprotected network, (it will not ask for Passphrase) simply click on Next.

Next step may take up to 1 minute until you can see "Connected"

ALL Done! You’re Online! You can close setup window.
If you do NOT see “Connected” begin from start!
The R36’s default WiFi Network Name (SSID) is “ALFA_AP” and is open for access to
anyone (not password protected)
Any Wireless Device can now connect to ALFA_AP Network and surf on internet.
Presented by www.pcXpert.org
This Guide is free for use but please Do NOT contact us for help if you did not buy the
Product from us
---------------------------------------------------------------------
Optional: You can change settings, like network Name (SSID) default is “ALFA_AP” or
password protect it, as long as you know what you do. See instructions below to
password protect your Own Network (ALFA_AP)

Enter password in Pass Phrase line and click “Apply”
After setting a password, you will need this password to connect to ALFA_AP

If you cannot connect to a specific Wifi Network in site survey, you may need to change the
R36’s default L N ip address (192.168.2.1) If the Router you want to connect to uses same L N
address it may be in IP address conflict.
Here we change L N to 192.168.20.1 NOTE; if you change the address, you must use this one
to access setup page, you may need to restart computer after changing L N address.
Change Address here and click “Apply” Router will restart

=======================================
R36 Firmware Upgrade: If you need to upgrade Firmware for R36 router.
http://www.alfa.com.tw/download.php (use Internet Explorer)
select & download / save firmware on computer as shown here

After Firmware download, follow upgrade instructions here:
http://www.alfa.com.tw/faq_show.php?sn=4
Other Helpful links:
http://www.alfa.com.tw/faq.php