ALFAtron TPUK70-RS T User manual

HDBaseT Extender Set
Statement
Read this user manual carefully before using this product. Pictures shown in this manual are for
reference only, different model and specifications are subject to real product. This manual is only for
operation instruction, not for any maintenance usage.
Safety Precaution
To insure the best from the product, please read all instructions carefully before using the device. Save
this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Unplug the power cord when left unused for a long period of time.
Refer all servicing to qualified service personnel.
After-sales Service
Introduction
TPUK70-RS is an ultra-thin HDMI2.0 Extender consist of transmitter (TPUK70-RS T) and receiver
(TPUK70-RS R). It extends 1080p/4K HDMI signal over CAT5e/CAT6a cable up to 70m /40m (PoC), and
enables IR and RS232 pass-through to control source or display device remotely. It also adopt a visually
lossless video compression technology (VLC) to ensure the HD lossless transmission of HDR and
4K@60Hz/4:4:4 over CAT5e/CAT6a cable.

HDBaseT Extender Set
Features
Supports 4K/UHD/60Hz/4:4:4
Supports HDMI2.0 & HDCP2.2, and is backward compatible to the previous version.
Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.
Supports CEC, IR and RS232 pass-through for long-distance control.
Supports bi-directional PoC for simplified wiring.
Supports HDR.
Features DIP switcher for choosing RS232 mode: Control, Update A, Update B.
Package List
1 x TPUK70-RS T Transmitter
1 x TPUK70-RS R Receiver
4 x Mounting Ears & 4 x Screws
8 x Plastic Cushions
2 x 3-Pin Phoenix Connector
1 x Power adaptor (12VDC, 2A)
1 x User Manual
Panel Description
TPUK70-RS T Transmitter
TPUK70-RS R Receiver
No.
Name
Description
①
Power LED
RED: DC power present.
②
RS232 MODE switcher
CTRL: RS232 pass-through control mode.
UPDATE A: Update Valens IC program, connect a PC to the RS232
port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade method
is the same as the above UPDATE A.
③
HDMI IN (TPUK70-RS
T)
Connect with HDMI source.
HDMI OUT(TPUK70-
RS R)
Connect with HDMI display.
④
RS232 connectors
If one is connected with control device (e.g. PC), and the other
should be connected with the third-party that need to be controlled.
⑤
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
CTRL
UPDATE A UPDATE B
Tx Rx DC 12V
IROUT
IRIN
HDBT OUT
HDMIIN
12345678
CTRL
UPDATE A UPDATE B
12345678
DC 12V
Tx Rx
HDMIOUT
HDBT IN
IROUT
IRIN

HDBaseT Extender Set
local.
⑥
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device from remote.
⑦
HDBT OUT(TPUK70-
RS T)
Connect to the HDBT IN socket on TPUK70-RS R via CAT5e/6a
cable.
HDBT IN (TPUK70-RS
R)
Connect to the HDBT OUT socket on TPUK70-RS T CAT5e/6a
cable.
⑧
DC 12V power ports
Support bi-directional PoC, one of ports should be connected with
DC12V 2A power adaptor.
Specification
Model
Spec
TPUK70-RS T Transmitter
TPUK70-RS R Receiver
Input
HDMI IN
HDBT IN
Output
HDBT OUT
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
IR IN, IR OUT, RS232
General
Transmission Mode & Distance
HDBaseT; 1080p ≤ 70m; 4K×2K ≤ 40m
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard
HDMI2.0 & HDCP2.2
Power Consumption
14W (max)
Temperature
-10 ℃~ 50℃
Humidity
0% ~ 90%
Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output: 12VDC 2A
Dimension (W*H*D)
115mm x 12 mm x 84mm
115mm x 12 mm x 84mm
Net Weight (g)
240g
240g
System Diagram
1.
After-sales Service
If there are problems when running the device, please check and deal with the
problems reference to this user manual.
1. Product Limited Warranty: ALFATRON warrants that its products will be free from
defects in materials and workmanship for Seven years, which starts from the first
day the product leaves warehouse (check the SN mark on the product).
Proof of purchase in the form of a bill of sale or receipted invoice must be presented
to obtain warranty service.
IR Emitter
4K Blu-Ray Laptop
TV Remote
IR Receiver
Transmitter Receiver
IR Emitter
HDTV
Blu-Ray
Remote
IR Receiver
HDMI:
IR:
RS232:
CATx:
Power:
4K 40m,1080P 70m
PoC

HDBaseT Extender Set
2. What the warranty does not cover:
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized by ALFAtron
Other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
3. Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.
1. Limited warranty in respect of ALFAtron Products Only
1.1 This limited warranty covers defects in materials and workmanship in this product.
1.2 Should warranty service be required, proof of purchase must be presented to the
Company. The serial number on the product must be clearly visible and not have been
tampered with in any way whatsoever.
1.3 This limited warranty does not cover any damage, deterioration or malfunction
resulting from any alteration, modification, improper or unreasonable use or
maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire,
improper packing and shipping (such claims must be presented to the carrier),
lightning, power surges, or other acts of nature. This limited warranty does not cover
any damage, deterioration or malfunction resulting from the installation or removal of

HDBaseT Extender Set
this product from any installation, any unauthorized tampering with this product, any
repairs attempted by anyone unauthorized by the Company to make such repairs, or
any other cause which does not relate directly to a defect in materials and/or
workmanship of this product. This limited warranty does not cover equipment
enclosures, cables or accessories used in conjunction with this product.
This limited warranty does not cover the cost of normal maintenance. Failure of the
product due to insufficient or improper maintenance is not covered.
1.4 The Company does not warrant that the product covered hereby, including, without
limitation, the technology and/or integrated circuit(s) included in the product, will not
become obsolete or that such items are or will remain compatible with any other
product or technology with which the product may be used.
1.5 Only the original purchaser of this product is covered under this limited warranty.
This limited warranty is not transferable to subsequent purchasers or owners of this
product.
1.6 Unless otherwise specified, the goods are warranted in accordance with the
manufacturer’s product specific warranties against any defect attributable to faulty
workmanship or materials, fair wear and tear being excluded.
1.7 This limited warranty only covers the cost of faulty goods and does not include the
cost of labour and travel to return the goods to the Company’s premises.
1.8 In the event of any improper maintenance, repair or service being carried out by
any third persons during the warranty period without the Company’s written
authorization, the limited warranty shall be void.
1.9 A 7 year limited warranty is given on the aforesaid product where used correctly
according to the Company’s instructions, and only with the use of the Company’s
components.
1.10 The Company will, at its sole option, provide one of the following three remedies
to whatever extent it shall deem necessary to satisfy a proper claim under this limited
warranty:

HDBaseT Extender Set
1.10.1 Elect to repair or facilitate the repair of any defective parts within a reasonable
period of time, free of any charge for the necessary parts and labour to complete the
repair and restore this product to its proper operating condition.; or
1.10.2 Replace this product with a direct replacement or with a similar product deemed
by the Company to perform substantially the same function as the original product; or
1.10.3 Issue a refund of the original purchase price less depreciation to be determined
based on the age of the product at the time remedy is sought under this limited
warranty.
1.11 The Company is not obligated to provide the Customer with a substitute unit
during the limited warranty period or at any time thereafter.
1.12 If this product is returned to the Company this product must be insured during
shipment, with the insurance and shipping charges prepaid by the Customer. If this
product is returned uninsured, the Customer assumes all risks of loss or damage
during shipment. The Company will not be responsible for any costs related to the
removal or reinstallation of this product from or into any installation. The Company will
not be responsible for any costs related to any setting up this product, any adjustment
of user controls or any programming required for a specific installation of this product.
1.13 Please be aware that the Company’s products and components have not been
tested with competitor’s products and therefore the Company cannot warrant products
and/or components used in conjunction with competitor’s products.
1.14 The appropriateness of the goods for the purpose intended is only warranted to
the extent that the goods are used in accordance with the Company’s installation,
classification and usage instructions.
1.15 Any claim by the Customer which is based on any defect in the quality or condition
of the goods or their failure to correspond with specification shall be notified in writing to
the Company within 7 days of deliver or (where the defect or failure was not apparent
on reasonable inspection by the Customer) within a reasonable time after discovery of
the defect or failure, but, in any event, within 6 months of delivery.
1.16 If delivery is not refused, and the Customer does not notify the Company
accordingly, the Customer may not reject the goods and the Company shall have no

HDBaseT Extender Set
liability and the Customer shall pay the price as if the goods had been delivered in
accordance with the Agreement.
1.17 THE MAXIMUM LIABILITY OF THE COMPANY UNDER THIS LIMITED
WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR
THE PRODUCT.