
Composite Video output:
NTSC with HDMI/VGA output resolution: 480p, 720p/60, 1080i/60, 1080p/60
PAL with HDMI/VGA output resolution: 576p, 720p/50, 1080i/50, 1080p/50
Long Press (more than one second) the or button to adjust the composite Video (CVBS)
output screen size.
「」Use this button to reduce the screen size.
「」Use this button to increase the screen size.
This function is used to correct an overscan condition on a CRT screen. Overscan
occurs when part of a video image does not appear on a screen because the video size
is larger than the screen size. You can reduce the video size from 0% up to 20%in
2% increments. Factory Default is the maximum screen output (reduced to 0%)
To Reset the device: Unplug the power, and then press and hold the Resolution
button during power on. Release the Resolution button. The device will revert to
the default HDMI/VGA of 480p output and set the CVBS output to the maximum video
size.
Panel View:
ALI-AV4
Caution:
The HDMI and VGA output resolution setting must be the same. Some HDMI and VGA
output resolutions may not be supported by your monitor. Please use a supported
resolution.
Specification:
ALI-AV4
HD-TVI (720p@25/30/50/60Hz, 1080p@25/30Hz)
HDMI & VGA (480p, 576p, 720p/50/60, 1080i/50/60, 1080p/50/60),
Composite video (NTSC, PAL)
HDMI Type-A, D-SUB 15, BNC
12 Vdc, 500 mA
300 mA
Operation: 32 ~ 131°F , Storage: -4 to 185°F, Humidity: up to 95%
3.46 x 5.12 x 1.18 in. (88 x 130 x 30 mm)
8.82 oz (250g)