AllBe Solutions AllBe1 User manual

www.allbe1.com Page 1 of 2
AllBe1 User manual
Table of Contents
1. Introduction............................................................................................................................. 3
2. CAUTIONS ................................................................................................................................ 3
3. Using the AllBe1 application – first steps................................................................................ 4
5. App General Settings:.............................................................................................................. 7
6. Human detection feature ...................................................................................................... 11
AllBe1 PIR sensor special bracket for human detection................................................................ 12
7. Events logging:....................................................................................................................... 13
8. Lock screen feature: .............................................................................................................. 14
9. Step counting......................................................................................................................... 15
10. Temperature and UV feature: ........................................................................................... 16

www.allbe1.com Page 2 of 2
11. Multi button: ..................................................................................................................... 17
12. Out of range alarm ............................................................................................................ 19
13. Tracker............................................................................................................................... 19
14. Kid in the car reminder...................................................................................................... 21
15. Trouble shooting ............................................................................................................... 22
15.1 CONNECTION PROBLEMS ...................................................................................................................22
15.2 SHUTTING DOWN THE ALLBE1DEVICE .............................................................................................22
15.3 THE ALLBE1DOESN’T TURNING ON ..................................................................................................22
16. What in the package.......................................................................................................... 23
17. Electrical characteristics:................................................................................................... 23
18. Certification:...................................................................................................................... 24

www.allbe1.com Page 3 of 2
1. Introduction
The allabe1 is a multi-sensor with extended BLE range, the user can defined many feature via
the Smart phone app.
The AllBe1 has the following features:
•Human detection- by passive infra-red detector.
•Tilt alarm by 3D accelerometer.
•UV sensing monitoring.
•Temperature sensing and monitoring.
•Out of range detection
•Assets tracking.
2. CAUTIONS
•Use only certified USB charger.
•Do not mount it on human body during charging
•Keep it away from water and other liquids.
•Keep the passwords if you are using them, forgoing the AllBe1 lock
password can't be restored!!!
•Most use power supply with current limit of maximum 200ma

www.allbe1.com Page 4 of 2
3. Using the AllBe1 application – first steps
Before start the app please put the AllBe1 device in charging for 2 hours or more.
Most use power supply with current limit of maximum 200ma
Step 2 – Install the ALLbe1 app' – go to Google Play or to Apple appstore and search for
Allbe1 app'
Step 2 – Turn on the AllBe1 by short pressing on the AllBe1 button, the blue LED should
flash fast – this the sign that the Allbe1 is on BT advertising mode ( searching for devices to
pair with).
Step 3 –Turn on the GPS and the BT on your phone.
Step 4 – you will see the following screen:

www.allbe1.com Page 5 of 2
By pressing on the black button the app will search for AllBe1 devices and show them.
In case that there are some AllBe1 devices you will see all of them.

www.allbe1.com Page 6 of 2
After click on the AllBe1 device that you want to connect it you will see the following screen:
Features selecting icons grid screen

www.allbe1.com Page 7 of 2
Now you can choose the feature you want, note that some features can work on the same time
and some not, for example there is no sense that the step counting will work on the same time
with the human detection feature, and on this cases the app will show a pop up message.
5. App General Settings:
By press the tooth wheel on the top left of the Icons grid app screen you can set some generals
options like choosing the alarm ringtone, choose to protect the AllBe1 with password,
automatic, giving a name for a device, Choosing the temperature units, .Automatic connection
option and some general information about the AllBe1 like MAC address
General app settings screen.

www.allbe1.com Page 8 of 2
•By long press on feature icon you can enable or disable it, by short press you will enter
to feature sub menu:
For example - Human detection sub menu

www.allbe1.com Page 9 of 2
"Tilt" sensor sub menu

www.allbe1.com Page 10 of
Once you torn on a feature –feature background will lit on.
Example: PIR (Human detection) feature on

www.allbe1.com Page 11 of
6. Human detection feature
The AllBe1 include PIR (passive infra-red) sensor,
This sensor can sense the Infra-Red radiation that cause by human presence,
The PIR sensor is covered by Fresnel lens in order to collect the IR radiation and improve the
detection performance.
PIR sensor Fresnel lens detection pattern
In order to achive the best performance with the PIR sensor, the AllBe1 should be mounted with
the PIR sensor special barcket, see picture bellow:

www.allbe1.com Page 12 of
AllBe1 PIR sensor special bracket for human detection
The Fresnel lens should be aimed to the desired detection area,
The AllBe1 with the bracket should be placed on a shelf or similar object on 1.5-1.8 meters
height.
The target (human) should move 2 meters inside the detection pattern.
Set "high sensitivity" for desired detection range of 4 meters.
Set "Medium sensitivity" for desired detection range of 2~3 meters.
Set "Low sensitivity" for desired detection range of 1 meters or less.

www.allbe1.com Page 13 of
7. Events logging:
If the PIR or TILT features are on, the Allbe1 will "stay awake" all the time even if the BT link will
disconnect and log the events, once you will connect again to the AllBe1, the Events icon will be
lite on and by press on it you will see the event and time stamp:

www.allbe1.com Page 14 of
Event log example
8. Lock screen feature:
By pressing the LOCK feature Icon the app will ask you to add password and confirm it again.
This feature will lock the phone screen when the AllBe1 is not connected to the phone,
Caution: Be careful if you get lost the AllBe1 and forgot the password you will not be
able to open your phone!!!

www.allbe1.com Page 15 of
9. Step counting.
The AllBe1 has a step counting feature based on 3D accelerometer.
By enable this feature the AllBe1 will start counting your steps, you can reset the counting by
pressing the reset icon on the step counting feature,
Note that you can disconnect the AllBe1 from the phone and he will continue to count
your steps and on midnight the counting will reset automatically.

www.allbe1.com Page 16 of
10. Temperature and UV feature:
By enable this features the AllB1 will show the current temperature /UV index (0.5c accuracy,
measuring the temperature on board, not accurate during charging)
You can set a range for the normal desired temperature; beyond this range you will get an
alarm.
Note – when the AllBe1 disconnected from the phone this features will not continue to work on
background.

www.allbe1.com Page 17 of
11. Multi button:
The AllBe1 have a multi-functional button on board,
When you enter this feature you should also choose what a button push will do,
Find my phone alert, send SMS message with user define text and google maps location, call to
emergency number, audio capturing or take a picture.
Note: the audio recording files will save on a folder called AllBe1 that you can find on your
device Downloads folder.

www.allbe1.com Page 18 of
If you click on a feature – a sub menu will open, for example:
Choosing SMS feature +sending google maps location

www.allbe1.com Page 19 of
12. Out of range alarm
You can use the Allbe1 for "out of range detection" as well.
When you choose this feature the allbe1 will alert you once the AllBe1 device is away from the
phone, you can choose from this feature sub menu long or short range when the long range is
alert when the BT link between the AllBe1 and phone is disconnected.
13. Tracker
This feature will let the user to locate assets that connect to the AllBe1 like key chain for
example.
When you choose this feature the Allbe1 will disconnect from the phone and the BT status will
change to advertising mode and you will be able tracking your AllBe1 for longer distances.
On the first app screen you will see near the AllBe1 list a tracker icon, by pushing this icon the
app start to show you notification and sound relatively to the AllBe1 location.

www.allbe1.com Page 20 of
Devices list with tracker enabled device
Tracker in action screen