ALLDOCK ONE-HAND-DOCK-ADAPTER User manual

ASSEMBLY INSTRUCTIONS
ONE-HAND-DOCK-ADAPTER

1

2

3
The rubber inlays are provided
for the adjustment of the
height of the connector to
the respective mobile phone
protective cover. The thicker
the protective cover, the larger
the inlays that need to be
used.
rubber inlays
2x2.5mm 2x3.5mm

4

5

6

6
Turn the device upside down.

7
2
Wind the cable around the stub
on the underside and firmly
press the cable into the slot.
See the illustration.

8

Now first press in the one-
hand click-in adapter with the
lever in the round corner. The
lever is flexible and will give
slightly. Then press the entire
adapter into the opening.
The adapter should now be
secure in the opening.

9
Connect the USB cable to the
ALLDOCK charging device.

Close the cover.
The one-hand click-in
adapter is now ready for use.
10

© 2018 ALLDOCK. ALL RIGHTS
RESERVED.
ALLDOCK AND THE ALLDOCK LOGO ARE
TRADEMARKS OF DITTRICH DESIGN
GMBH . PATENT NR. 102013009880.7
www.alldock.com
www.alldock.de