Allen-Bradley VersaView 6300B Series User manual

VersaView 6300B Wall Mount
Box PCs
Bulletin Numbers 6300B-PBCx and 6300B-PBDx
User Manual Original Instructions

2Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
VersaView 6300B Wall Mount Box PCs User Manual
Important User Information
Read this document and the documents listed in the additional resources section about installation, configuration, and
operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize
themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to
be carried out by suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be
impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use
or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software
described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is
prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Labels may also be on or inside the equipment to provide specific precautions.
WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may
lead to personal injury or death, property damage, or economic loss.
ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or
economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.
IMPORTANT Identifies information that is critical for successful application and understanding of the product.
SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may
be present.
BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach
dangerous temperatures.
ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc
Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements
for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 3
VersaView 6300B Wall Mount Box PCs User Manual
Safety Guidelines The VersaView® 6300B wall mount PCs in this publication must be operated
only by qualified personnel. Qualified personnel are those who, based on their
training and experience, are able to identify risks and potential hazards while
working with these computers.
The VersaView 6300B wall mount PCs are only for indoor use. The computers
can be damaged if operated outdoors.
The VersaView 6300B wall mount PCs are open equipment, which means the
following:
• This equipment can only be integrated in housings or cabinets where
the computer is operated from the front panel.
• The housing or cabinet in which the computer is mounted can only be
accessed with a key or tool, and only by qualified personnel.
• Before a housing or cabinet can be opened, all power must first be
disconnected.
Proper Disposal of the
Computer
You cannot dispose of computer equipment like other waste material. Most
computers and monitors contain heavy metals that can contaminate the earth.
Therefore, check with local health and sanitation agencies for ways to dispose
of computer equipment safely.
Battery Removal
Waste Electrical and Electronic Equipment (WEEE)
This computer contains a sealed lithium battery that could need
replacement during the life of the computer. At the end of its life, collect the
battery that is contained in this computer separately from any unsorted
municipal waste.
At the end of its life, collect this equipment separately from any unsorted
municipal waste.

4Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
VersaView 6300B Wall Mount Box PCs User Manual
Notes:

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 5
Table of Contents
Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Proper Disposal of the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Catalog Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 1
About the Wall Mount Box PC Computer Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Computer Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2
Install the Wall Mount Box PC Unpack the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Prepare for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Environment and Enclosure Information . . . . . . . . . . . . . . . . . . . . . . 13
UL/cUL Mark Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
European Union Directive Compliance . . . . . . . . . . . . . . . . . . . . . . . . 14
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mounting Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Required Tools and Hardware for Installation . . . . . . . . . . . . . . . . . . . . . 15
Install the Wall Mount Box PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Install Method 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Install Method 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connect Peripheral Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Grounding and Bonding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DC Power Supply Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Install the Ground Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connect DC Power (for Cat. Nos. 6300B-PBCx Wall Mount PCs) . 18
Connect AC Power (for Cat. Nos. 6300B-PBDx Wall Mount PCs) . 20
Chapter 3
Operate the Wall Mount Box PC Operating Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Start the Wall Mount Box PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Light-emitting Diode and Button Descriptions . . . . . . . . . . . . . . . . . . . . 21
Restart or Reset the Wall Mount Box PC. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Restart the VersaView 6300B Wall Mount Box PC. . . . . . . . . . . . . . . 22
Reset the VersaView 6300B Wall Mount Box PC . . . . . . . . . . . . . . . . 23
Shut Down the Wall Mount Box PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 4
Configure the UEFI (BIOS)
Settings
Access the Set-up Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Common Set-up Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 5
Clean the Wall Mount Box PC Clean the Vent Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clean the Fan Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 6
Troubleshoot the System Thermal Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Load the System Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Ship or Transport the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Chapter 7
Replace Components Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Voltage Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Electrostatic Discharge Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Pre-configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Post-configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Remove the Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Replace the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Reinstall the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 7
Preface
This manual is a user guide for VersaView® 6300B wall mount box PCs. It
provides procedures to the following:
• Install the computer.
• Make computer connections.
• Operate the computer.
• Troubleshoot the computer.
A general knowledge of automation technology is needed to understand and
follow the instructions in this publication.
Knowledge of personal computers and Microsoft Windows® operating
systems is required to understand and follow the instructions in this
publication.
Catalog Numbers This publication is applicable to these VersaView 6300B wall mount box PCs.
For your catalog number, see the product label on the side of your computer.
Additional Resources These documents contain additional information about related products from
Rockwell Automation.
You can view or download publications at rok.auto/literature.
VersaView 6300B wall mount PCs with one expansion slot 6300B-PBCx
VersaView 6300B wall mount PCs with up to three expansion slots 6300B-PBDx
Resource Description
VersaView 6300B Wall Mount PCs Installation
Instructions, publication 6300B-IN002 Provides basic installation guidelines and instructions for
VersaView 6300B wall mount PCs.
VersaView 6300 Industrial Computer and Monitor
Specifications Technical Data, publication IC-TD003 Provides technical specifications about all VersaView 6300
industrial PCs, thin clients, and monitors.
Industrial Automation Wiring and Grounding
Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell
Automation industrial system.
Product Certifications website,
rok.auto/certifications Provides declarations of conformity, certificates, and other
certification details.

8Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Preface
Notes:

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 9
Chapter 1
About the Wall Mount Box PC
The Allen-Bradley® VersaView® 6300B wall mount box PCs with Intel Core i3
and i7 processors are available in designs with or without fans. Fan-cooled
units perform well in challenging environments with elevated temperatures.
All wall mount PCs can be paired with FactoryTalk® View SE software to
provide the optimal human machine interface (HMI) experience within the
Rockwell Automation® Connected Enterprise.
The following features are available for the Cat. No. 6300B-PBCx VersaView
wall mount PCs:
• Microsoft Windows 10 IoT Enterprise 2019 LTSC operating system(1)
• Storage up to 1 TB 2.5-in. SSD SATA III (mSATA interface)(1)
• 4 x Ethernet (RJ45), 3 x USB 3.0 (Type A), 2 x USB 2.0 (Type A), 1 x RS-232
(DB9M), and 1 x DVI-D (full HD) ports
• One PCIe x4 expansion slot
• Fanless design for 24V DC SELV input power
The following features are available for the Cat. No. 6300B-PBDx VersaView
wall mount PCs:
• Microsoft Windows 10 IoT Enterprise 2019 LTSC
• Storage up to 1 TB 2.5-in. SSD SATA III (M.2 2280 interface)
• 4 x Ethernet (RJ45), 4 x USB 3.0 (Type A), 1 x RS-232 (DB9M), and
1 x DVI-D (full HD) ports
• Up to three PCIe expansion slots (1 x PCIe x16 + 1 x PCIe x4 + 1 x PCIe x1)
• Fan cooled design for 100/230V AC input power
(1) Two wall mount box PCs, Cat. Nos. 6300B-PBCDNB-7BNBNNNNNNNNN-NN1S and
6300B-PBDAFK-7BNENNNNNNNNN-NN1S, are available with no storage drive and no
Windows operating system.
A Cat. No. 6300B-PBDx Wall Mount Box PC With AC Input PowerA Cat. No. 6300B-PBCx Wall Mount Box PC With DC Input Power

10 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 1 About the Wall Mount Box PC
Computer Dimensions The following figure shows the dimensions of the VersaView 6300B wall
mount box PCs. All dimensions are in mm (in.).
Figure 1 - VersaView 6300B Wall Mount PC Dimensions
Computer Connections Figure 2 and Figure 3 on page 11 show the computer connections of VersaView
6300B wall mount box PCs.
Figure 2 - VersaView 6300B-PBCx Wall Mount Box PC Computer Connections
B
Back ViewSide View
A
C
D
EFG G
I
J
HK
I
K
Ø5
(0.2)
Ø5
(0.2)
Ø10
(0.39)
Method 1 (x 4)
Method 2 (x 4)
Bull. No.
Dimensions in mm (in.)
A B C D E F G H I J K
6300B-PBCx 338.4 (13.32) 324 (12.75) 246 (9.69) 75.8 (2.98) 69.8 (2.75) 6 (0.24) 7.2 (0.28) 78 (3.07) 110 (4.33) 58 (2.28) 68 (2.68)
6300B-PBDx 377 (14.84) 362 (14.25) 232 (9.13) 128 (5.04) 122 (4.8) 6 (0.24) 7.5 (0.3) 51 (2) 150 (5.9) 31 (1.22) 41 (1.61)
4
5
67
3
No. Description No. Description
1 Ground screw 6 3 x USB 3.0 port, Type A
2 DC input power connection 7 DVI-D port, full HD
3 Serial port, RS-232 (DB9M) 8 PCIe x4 expansion slot
4 4 x Ethernet LAN port, RJ45 9 CFast card slot
5 2 x USB 2.0 port, Type A
4
8
9
2
1
NOTE: Computer connections shown are
a possible configuration; your connection
configuration can differ.

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 11
Chapter 1 About the Wall Mount Box PC
Figure 3 - VersaView 6300B-PBDx Wall Mount Box PC Computer Connections
48
3
6
No. Description No. Description
1 Ground screw 6 Serial port, RS-232 (DB9M)
2 AC input power connection 7 CFast card slot
3 DVI-D port, full HD 8 2 x SSD drive slot (optional)
4 4 x Ethernet LAN port, RJ45 9 3 x PCIe expansion slot
5 4 x USB 3.0 port, Type A
4
5
9
7
4
12
NOTE: Computer connections shown are
a possible configuration; your connection
configuration can differ.

12 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 1 About the Wall Mount Box PC
Notes:

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 13
Chapter 2
Install the Wall Mount Box PC
Follow these guidelines and procedures to help you plan your installation, and
mount and power up the VersaView® 6300B wall mount box PC.
Unpack the Computer Before you unpack the computer, inspect the shipping carton for damage. If
damage is visible, immediately contact the shipper and request assistance.
Otherwise, proceed with unpacking.
Keep the original packing material in case you must return the computer for
repair or transport it to another location.
Parts List The wall mount box PC ships with the following items.
Prepare for Installation Read and follow these precautions before you install the wall mount box PC.
Environment and Enclosure Information
Item Description
Hardware • For Cat. No. 6300B-PBCx models: DC power connector assembly kit
• For Cat. No. 6300B-PBDX models: A grounded, 3-prong IEC60320-C13 power cord
Document VersaView 6300B Wall Mount Box PCs Installation Instructions, publication 6300B-IN002
ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial
environment, in overvoltage Category II applications (as defined in IEC 60664-1), at
altitudes up to 2000 m (6561 ft) without derating.
This equipment is considered Group 1, Class A industrial equipment according to
IEC/EN 61326-1. Without appropriate precautions, there can be potential difficulties
with electromagnetic compatibility in other environments due to conducted as well
as radiated disturbance.
This equipment is considered open equipment, which means it must be mounted in
an enclosure where the equipment can be operated from the front panel.
The enclosure in which this equipment is installed must be accessed only with a
key or tool, and only by trained and authorized personnel.
In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for
more installation requirements
• UL 50, CSA C22.2 No. 94.1, and IEC 60529, as applicable, for explanations of the
degrees of protection provided by enclosures

14 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 2 Install the Wall Mount Box PC
UL/cUL Mark Compliance
Equipment with the UL/cUL mark complies with the requirements of
UL 61010-1, UL 61010-2-201, CSA C22.2 No. 61010-1, and CSA C22.2
No. 61010-2-201. A copy of the certificate of compliance is available at
rok.auto/certifications.
European Union Directive Compliance
This computer meets the European Union Directive requirements when
installed within the European Union or EEA regions and have the CE marking.
A copy of the declaration of the conformity is available at
rok.auto/certifications.
Connect peripheral cables to the appropriate I/O ports on the computer. To
comply with EN 61326-1, see Connect Peripheral Cables on page 16 for the
required cable types.
Installation Guidelines Follow these guidelines to make sure that your computer provides service with
excellent reliability.
• When choosing the installation site, consider the following:
- The site must have sufficient power
- The site must be indoors
- The site must not expose the computer to direct sunlight
• The computers can operate in a surrounding air temperature range as
follows:
- 0…50 °C (32…122 °F) for 6300B-PBCx wall mount box PCs with the
Intel Core i3 processor
- 0…45 °C (32…113 °F) for 6300B-PBCx wall mount box PCs with the
Intel Core i7 processor
- 0…50 °C (32…122 °F) for 6300B-PBDx wall mount box PCs with the
Intel Core i3 and Intel Core i7 processors
• The surrounding air temperature must not exceed the maximum
temperature for your computer, especially when the computer is
mounted in an enclosure.
• The computers can be stored in a surrounding air temperature range of
-10…+60 °C (14…140 °F).
• The humidity of the ambient air must not exceed 80% noncondensing.
ATTENTION: This equipment is intended to operate in an industrial or control room
environment, which uses some form of power isolation from the public low-voltage
mains. Obtain permission from the local power authority before you connect any
computer configuration that draws more than 75 W of AC power directly from the
public mains.
All I/O cables must be used only indoors.

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 15
Chapter 2 Install the Wall Mount Box PC
Mounting Requirements Follow these requirements to mount the VersaView 6300B wall mount box PC.
• Choose a suitable mounting height
• For optimal performance, mount the computers in the vertical
(upright) position, so the I/O ports face down.
• To help prevent overheating and to provide access to the I/O ports for
cable connections, mount the computer so there are the following
minimum clearances:
- X and Z directions: 7 cm (2.75 in.)
- Y direction: 10 cm (3.94 in.)
Required Tools and
Hardware for Installation
The following tools and hardware are needed for wall mount installations.
• A drill and drill bit
• #2 Phillips screwdriver
• Four M4x20 stainless steel screws (customer supplied)
• Safety glasses
Install the Wall Mount Box
PC
There are two preferred methods to install the computer.
Install Method 1
1. See Method 1 in Figure 1 on page 10 to locate and drill holes for the four
M4x20 stainless steel screws.
2. Align the holes on both computer brackets with the four drilled holes.
3. Install the computer with the four customer-supplied screws.
4. Tighten the four screws.
Install Method 2
1. See Method 2 in Figure 1 on page 10 to locate and drill holes for the four
M4x20 stainless steel screws.
2. Install the four customer-supplied screws but leave enough space to
hang the brackets.
3. Align the four keyhole slots on both computer brackets with the four
installed screws.
IMPORTANT The vertical position can be tilted up to 20° forward or backward
from the upright position. However, any tilt angle reduces the
maximum operating temperature by 5 °C (41 °F).
Y
Y
XX Z
I/O Ports Face Down
Vertical (Upright)
Position
0°
(preferred)
20°
max
20°
max

16 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 2 Install the Wall Mount Box PC
4. Slide each bracket downward until all four screws are at the top of each
keyhole slot.
5. Tighten the four screws.
Connect Peripheral Cables Connect peripheral cables to the appropriate I/O ports on the computer. To
comply with EN 61326-1, use the following for cable types. All I/O cables must
be used only indoors, and USB cables must be less than 3 m (9.84 ft) long.
Grounding and Bonding Whenever two connected pieces of equipment are far apart, it is possible that
their ground connections could be at different potential levels.
To overcome possible grounding problems, the following bonding methods are
recommended:
• Method 1: Connect the data cable shields to the equipotential bonding
rail on both sides before you connect the cable to the interfaces.
• Method 2: Use an equipotential bonding cable (16 mm2or 6 AWG) to
connect the grounds between this VersaView 6300B box PC and a
connected monitor.
DC Power Supply Guidelines Follow these guidelines to select the DC power supply for the computer.
• The computer must be powered with a voltage of 24V DC (18…32V DC
SELV input voltage range).
• The nominal output power must be 25% larger than the drained power.
• The output voltage rise
time has to be less than
100 ms.
•Considertheworking
temperature and the
thermal derating of the
power supply.
• The inrush current can
be represented by the
figure at right, where the
peak current is 10 A and
the pulse width time is
400 μs.
Item
No. Cable Type Required
Attribute Item
No. Cable Type Required
Attribute
1LAN
Shielded
—AC power(1)
Unshielded
2USB2.0 DC power(2)
3USB3.0
4RS-232DB9M
5DVI-D
1
1
23
45
Peripheral connections on 6300B-PBCx box PCs
4
1
1 1
3
5
Peripheral connections on 6300B-PBDx box PCs
IMPORTANT The following DC power supply guidelines apply only to Cat. No. 6300B-PBCx
models. For Cat. No. Cat. No. 6300B-PBDx PC models, see Connect AC Power
(for Cat. Nos. 6300B-PBDx Wall Mount PCs) on page 20.
Current
Peak Current
Inrush Current Magnitude
Steady-state
Current Value
Time
Pulse Width
(1) Applies to 6300B-PBDx models.
(2) Applies to 6300B-PBCx models.

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 17
Chapter 2 Install the Wall Mount Box PC
Power Consumption
The following table shows the power consumption in watts of various
components in VersaView 6300B wall mount box PCs.
Install the Ground Wire 1. Turn off the main power switch or breaker.
2. Remove the supplied nut, eyelet terminal, and washers from the
ground screw.
3. For earth ground, fasten a 2.5 mm2(14 AWG) or larger external wire to
the eyelet terminal.
Use a ground wire with an insulation color that is approved by local
inspection authority.
4. Install the ground wire to the ground screw in the following sequence.
5. Tighten the nut to the ground screw.
Connect Power
Component Description Power
(W) Component Description Power
(W)
Motherboard — 10.5 USB ports 2.0 Type A, each port 2.5
Processor Intel Core i3-7100E 45.8 3.0 Type A, each port 4.5
Intel Core i7-7820EQ 58.8 Memory card CFast SATA 1.3
SSD mSATA2 2.0 Ethernet 10/100/1000 Mbps 1.3
2.5-in. SATA MLC 5.2
RAM
4 GB 3.9
Serial port RS-232 DB9M 1.3 8 GB 4.6
Expansion slot PCI half-size or PCIe x4 6.5(1)
(1) 5W is the maximum that the card can use.
16 GB 5.9
32 GB 8
WARNING: Do not exceed 120 W for the total system configuration. Power consumption
greater than 120 W can overpower the external and internal power supplies, which can
lead to component damage or, in extreme cases, electrical fires.
Sequence
No. Description Sequence
No. Description
1 Toothed washer 4 Lock washer
2 Eyelet terminal 5 Nut
3Washer
12345
ATTENTION: When you connect power to the computer for the first time, these
actions occur:
• The default UEFI setting automatically starts the computer after it is plugged into a
power source.
• For VersaView 6300B wall mount box PCs with a Microsoft Windows operating
system (OS), you must read and accept an End User Setup procedure.
Do not disconnect power from the system until after the Windows Setup
procedure is completed. If power is disconnected during this procedure, it can
result in a corrupted system image.

18 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 2 Install the Wall Mount Box PC
Operate the wall mount box PC in an industrial or control room environment,
which uses some form of power isolation from the public, low-voltage mains.
Connect DC Power (for Cat. Nos. 6300B-PBCx Wall Mount PCs)
All VersaView DC powered models require a safety extra low voltage (SELV)(1)
power supply per UL. The power supply is internally protected against reverse
polarity.
To minimize ground loop currents and noise, Allen-Bradley® recommends that
DC powered models use only one grounded connection. For the ground
connection on these model, see Figure 2 on page 10.
Follow these steps to connect the computer to a DC power source.
Install the Factory-supplied DC Power Connector Assembly
This connector assembly provides strain relief for the DC power wires by
reducing their movement. To assemble and attach the connector assembly,
perform the following steps.
1. Remove the DC terminal block from the computer chassis.
For the terminal block location, see Figure 2 on page 10.
2. Open the power connector assembly kit that ships with the computer
(A).
3. Insert the cable tie through the slots of the appropriate connector half
(B).
4. Strip the end of each DC power wire to the length in Table 1 on page 19.
5. Insert each stripped end into the DC terminal block as shown in Table 1
on page 19.
ATTENTION: For VersaView 6300B wall mount box PCs with a Windows OS, perform
the following:
• Supply the computer with its own disconnect. Use an uninterruptible power source
(UPS) to help protect against unexpected power failure or power surges.
• Always shut down the Windows OS before you disconnect power to the computer to
minimize performance degradation and operating system failures.
(1) Where SELV is as defined in IEC 61010-2-201.
You need the following tools for this installation:
• Small screwdriver
• Wire stripper, cutter, and crimper tool
• Cutting pliers
IMPORTANT DC power wires must be of stranded copper and sized according to Table 1
on page 19.
DA B C E F

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 19
Chapter 2 Install the Wall Mount Box PC
Table 1 - DC Terminal Block Connection Specifications
6. Tighten the screws on top of the terminal block to secure the DC power
wires to the torque value in Table 1.
7. Slide the connector half with the attached tie onto the end of the DC
terminal block (C).
8. Tighten the cable tie so it is snug against the terminal wires.
9. Use cutting pliers to cut the excess part of the cable tie (D).
10. Install the white label supplied with the kit (E).
11. Align and install the other connector clamp half to complete the
assembly (F).
12. Reconnect the DC terminal block with the connector assembly to the
computer chassis.
Torque the DC terminal block flange screws to the values in Table 1.
13. Turn on the main power switch or breaker.
14. See Connect Power on page 17 for what happens during initial
computer power-up.
Item Description 6300P-PBCx Models
1 DC+ (24V DC nominal) recommended power wire size 2.5 mm2(14 AWG)
2 DC- (0V DC) recommended power wire size
3 Stripped wire length 7 mm (0.275)
4 Torque range to secure DC power wires 0.5...0.6 N•m (0.37...0.4 ft•lb)
5 Torque value to reinstall DC terminal block to computer 0.3 N•m (0.22 ft•lb)
IMPORTANT The DC terminal block in the photos is only for illustrative
purposes. Your DC terminal block can differ in size, shape, and
color to what is shown in the photos.
The white label can be used for identification or other information.
When installed correctly, both clamp tabs snap into place.
Cat. Nos. 6300B-PBCx Wall Mount PCs
DC Terminal Block (Green)
12
33
4
5 (M3) 5 (M3)
4
DA B C E F

20 Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 2 Install the Wall Mount Box PC
Connect AC Power (for Cat. Nos. 6300B-PBDx Wall Mount PCs)
Operate the computer in an industrial or control room environment, which
uses some form of power isolation from the public, low voltage mains.
To connect AC power to the computer, perform the
following steps.
1. Connect the appropriate end of the supplied
power cord to the power input port on the
computer.
2. Connect the other end of the supplied power cord to an AC power
source with an input voltage of 110…230V AC, 50/60 Hz.
3. Turn on the power switch in the power input port of the computer.
4. See Connect Power on page 17 for what happens during initial
computer power-up.
AC Power Input Port
This manual suits for next models
2
Table of contents
Other Allen-Bradley Desktop manuals

Allen-Bradley
Allen-Bradley 6189V-6181SSD64GB User manual

Allen-Bradley
Allen-Bradley 6153 Instruction manual

Allen-Bradley
Allen-Bradley 6155R-NSXPH User manual

Allen-Bradley
Allen-Bradley 6181X-NPXPDC User manual

Allen-Bradley
Allen-Bradley 6151 Instruction manual

Allen-Bradley
Allen-Bradley 6182 User manual

Allen-Bradley
Allen-Bradley Series B User manual

Allen-Bradley
Allen-Bradley H Series User manual

Allen-Bradley
Allen-Bradley 177R-M4AXP User manual

Allen-Bradley
Allen-Bradley 6181P User manual