AllerAir AirTube Jr. User manual

Step 2
Gently lay unit up-side down. With
a screw driver, remove all 4 screws.
Step 3
Remove lid by pulling slightly on
cover.
Step 1
Turn Power Off and
unplug receptacle.
Step 5
To replace the electrostatic HEPA
filter, gently remove the filter from
carbon canister and replace with a
new one.
REPLACING FILTER ASSEMBLY- AirTube Jr.
MODELS Air Tube Jr. Air Tube Air Tube Supreme
Carbon (Exec Models) 9" A2FCW301 9" A3FCW302 12" A3FCB401
Carbon (Vocarb Models) 9" A2FCW302 9" A3FCW303 12" A3FCB403
Micro-HEPA Wrap A2FMR002 9 x 21 A3FH0410 HEPA A3FH0420 HEPA
PRE-FILTER --------------------- A3FMP009 A3FMP012
Motor A2EL0040 A2EL0040 A2EL0040
Switch CMEL0046 CMEL0046 CMEL0046
Cord A3EL0046 A3EL0046 A3EL0046
Handle A4HD8414 A4HD8414 A4HD8414
Step 7
Place lid back to its proper position
by aligning screw holes.
Step 8
With a screw driver, place 4
screws back into their positions.
Step 4
Remove Carbon filter by placing
hands on the inner side of the filter.
Then pull up gently until totally out.
Step 6
Replace all filters with new ones
then reassemble by inserting the
Carbon filter.
AirTube
AirTube Supreme
AirTube Jr.
AllerAir Industries Inc. Toll free:1-888-852-8247 / Fax:[phone] www.allerair.com
Operation and Maintenance Manual for
Air Tube Series
REPLACEMENT PARTS

REPLACING FILTER ASSEMBLY-
AirTube & Air Tube Supreme
Step 2
Gently lay unit up-side down. With
a screw driver, remove all 4 screws.
Step 3
Remove lid by pulling slightly on
cover.
Step 1
Turn Power Off and
unplug receptacle.
Step 6
A- To replace pre-filter,gently
remove pre-filter from Carbon
canister and replace with new one.
B- To replace Anti-microbial filter,
peel off filter liner.
Step 4
First remove HEPA filter by placing
your hand on the inner side of the
filter.
Then pull up gently until totally out.
Step 5
Now remove Carbonfilter by placing
hands on the inner side of the filter.
Then pull up gently until totally out.
Step 8
Place lid back to its proper position
by aligning screw holes.
Step 9
With a screw driver, place 4
screws back into their positions.
Step 7
Replace all filters with new ones
then reassemble by inserting the
Carbon filter first then the HEPA.
A
B
Congratulations, you are moments away from fresher, cleaner indoor air.
Your new AllerAir unit will combat many of the chemicals, gases, odors and
particles responsible for poor indoor air quality, and in turn, health concerns
such as allergies, asthma, sick building syndrome and multiple chemical
sensitivity. As with any air cleaner, proper maintenance of your unit is a vital
part of keeping it operating at peak efficiency.
AllerAir Industries Inc.
AirTube Series
Operation:
Your unit is shipped fully assembled and ready for use. Plug into 120V-
15amp outlet. For best results situate your unit close to your sitting,
sleeping or work area.
NOTE: Please save your packaging. Original packaging will be required for
all warranty returns.
WARNING !
Before removing the top or bottom of the unit for any
reason, always unplug the cord from the power supply.
Maintenance:
AirTube & Air Tube Supreme
The HEPA Filter (Model AirTube HEPA)
Should be changed after
approximately 24 months of use
in an average home environment.
A noticeable lessoning of airflow
is a sign that it may be time to
replace this filter.
The Carbon Filter(Model AirTube Carbon)
Should be changed after
approximately 12 months of use
in an average home environment.
A noticeable decrease in air
quality could also be a sign that it
may be time to replace this filter.
The Pre-filter (Model AirTube Prefilter)
Replace or vacuum from the
outside of the unit every 2-3
months.
AirTube Jr.
The Electrostatic HEPA Filter
(Model AirTube Jr. Electrostatic HEPA)
Should be changed after
approximately 12 months of use in
an average home environment.
A noticeable lessoning of airflow
is a sign that it may be time to
replace this filter.
The Carbon Filter (Model AirTube Jr. Carbon)
Should be changed after
approximately 9-12 months of use
in an average home environment.
A noticeable decrease in air
quality could also be a sign that it
may be time to replace this filter.