AllerAir AirTube Junior Series User manual

Congratulations!
You are moments away from fresher, cleaner indoor air. Your new AllerAir unit will combat many of the
chemicals, gases, odors and particles responsible for poor indoor air quality, and in turn, health concerns
such as allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with any air cleaner,
proper maintenance of your unit is a vital part of keeping it operating at peak efficiency.
Model No. ___________________
Serial No. ___________________
Operation and
Maintenance Manual
AirTube Junior/AirTube/AirTube Supreme Series
Note:
As original packaging is required for warranty returns,
new AllerAir owners are advised to keep boxes and
shipping materials.
Operation:
Your unit is shipped fully assembled and ready for use. Plug into 120V-15amp outlet. For best results
situate your unit close to your sitting, sleeping or work area.

AllerAir · 1.888.852.8247 · [e-mail]
2
Operating and Maintenance Manual
WARNING! BEFORE REMOVING THE TOP OR BOTTOM OF THE UNIT FOR ANY REASON, ALWAYS
UNPLUG THE CORD FROM THE POWER SUPPLY.
AIR TUBE & AIR TUBE SUPREME MAINTENANCE
The HEPA Filter
Should be changed after approximately 24 months of use in an average home environment.
 A reduced level of airflow is a sign that it may be time to replace this filter.
The Carbon Filter
Should be changed after approximately 12 months of use in an average home environment.
 A noticeable decrease in air quality could also be a sign that it may be time to replace this filter.
The Pre-Filter
Replace or vacuum from the outside of the unit every 2-3 months.
AIR TUBE JUNIOR MAINTENANCE:
The Micro-HEPA Filter
Should be changed after approximately 12 months of use in an average home environment.
 A reduced level of airflow is a sign that it may be time to replace this filter.
The Carbon Filter
Should be changed after approximately 9-12 months of use in an average home environment.
 A noticeable decrease in air quality could also be a sign that it may be time to replace this filter.
REPLACEMENT PARTS ORDER REFERENCE NUMBERS*
To order replacement parts, call AllerAir toll-free at 1-888-852-8247 during regular business hours (EST), or
send an e-mail to [e-mail]
Models AirTube Jr. AirTube AirTube Supreme
Carbon (Exec Models) 9" A2FCW301 9" A3FCW302 12" A3FCB401
Carbon (Vocarb Models) 9" A2FCW302 9" A3FCW303 12" A3FCB403
Micro-HEPA Wrap A2FMR002 9x21 A3FH0410 HEPA A3FH0420 HEPA
PRE-FILTER – A3FMP009 A3FMP012
Motor A2EL0040 A2EL0040 A2EL0040
Switch CMEL0046 CMEL0046 CMEL0046
Cord A3EL0046 A3EL0046 A3EL0046
Handle A4HD8414 A4HD8414 A4HD8414
*Please use the above part numbers when ordering your replacement parts.

Visit our indoor air quality library: http://www.allerair.com/air-quality-library/index.html 3
AirTube Series
REPLACING FILTER ASSEMBLY (AirTube & AirTube Supreme)
STEP 2
Gently lay unit upside down. With
a screw driver, remove all 4 screws.
STEP 3
Remove lid by pulling slightly on
cover.
STEP 1
Turn power off and
unplug receptacle.
STEP 6
A - To replace pre-filter, gently
remove pre-filter from carbon
canister and replace with new one.
B - To replace anti-microbial filter,
peel off filter liner.
STEP 4
First remove HEPA filter by placing
your hand on the inner side of the
filter.
Pull gently until completely
removed.
STEP 5
Now remove carbon filter by
placing hands on the inner side of
the filter.
Pull gently until completely
removed.
STEP 8
Place lid back to its proper
position by aligning screw holes.
STEP 9
With a screw driver, place 4 screws
back into their positions.
STEP 7
Replace all filters with new ones
then reassemble by inserting the
carbon filter first then the HEPA.
A
B

Operating and Maintenance Manual
REPLACING FILTER ASSEMBLY (AirTube Junior)
STEP 2
Gently lay unit upside down. With
a screw driver, remove all 4 screws.
STEP 3
Remove lid by pulling slightly on
cover.
STEP 1
Turn power off and
unplug receptacle.
STEP 5
To replace the micro-HEPA filter,
gently remove the filter from
carbon canister and replace with a
new one.
STEP 7
Place lid back to its proper
position by aligning screw holes.
STEP 8
With a screwdriver, replace 4
screws.
STEP 4
Remove carbon filter by placing
hands on the inner side of the filter.
Pull gently until completely
removed.
STEP 6
Replace all filters with new ones
then reassemble by inserting the
carbon filter.
TEN YEAR LIMITED WARRANTY
Your AllerAir unit comes with a 10-year limited warranty excluding expendable parts such as
pre-filters and filters. This warranty provides for the repair of any defective components and labor for
5 years from the date of delivery. An additional 5-year warranty is provided on parts. This product is
not covered against damage resulting from misuse. This warranty is provided to the original
purchaser and may not be transferred. A return authorization number is required for warranty repairs.
Please contact AllerAir at 1-888-852-8247 for more information.
1.888.852.8247
www.allerair.com
A-0088