Allied Telesis WebSmart AT-FS750/16 How to use

PN 613-001006 Rev A 1
AT-S80 Version 2.1.0
Management Software for the
AT-FS750/16, AT-FS750/24 Fast Ethernet
Smart Switches Software Release Notes
Please read this document before you begin to use the management software.
Supported Platforms
This release of the AT-S80 Management Software is supported on the following switches:
AT-FS750/16 Fast Ethernet Smart Switch
AT-FS750/24 Fast Ethernet Smart Switch
The AT-FS750/16 and AT-FS750/24 Fast Ethernet Smart Switch supports the following ATI 100
MB SFP modules:
AT-SPFX/2
AT-SPFX/15
AT-SPFX/40
The AT-FS750/16 and AT-FS750/24 Fast Ethernet Smart Switch supports the following ATI
1000 MB SFP modules:
AT-SPSX
AT-SPLX10
AT-SPLX40
AT-SPZX80
Product Documentation
For hardware installation and management instructions, refer to the following guides on the Allied
Telesis web site at www.alliedtelesis.com:
AT-S80 Management Software User’s Guide Installation Guide
AT-FS750/16 and AT-FS750/24 Fast Ethernet Smart Switches Installation Guide
What’s New in Version 2.1.0
Software Features
None

AT-S80 Version 2.1.0 Software Release Notes
PN 613-001006 Rev A 2 Allied Telesis, Inc.
Hardware Features
None
Known Issues
The following issues were found in this release:
Default VLAN. The Management port can be accessed from any VLAN and is not restricted
to the default VLAN as is stated in the manual. This issue will be fixed in a future release.
Setting the Fiber Combo Port Type. On the web interface, the fiber side of a combo port (port
25 or port 26) can only be changed between 100FX and 1000X on the Physical Interface
page. If you try to change this parameter by selecting the Front Panel page by double clicking
on one of the fiber ports and attempting to change the Port Type, it only allows 1000X to be
selected.
Combo Port Link State. On the Front Panel web page, the combo port link state does not
display when linked via 100FX. See Figure 1, “Front Panel Web Page w/ 100FX Link” below.
Port Display Color. On the Front Panel web page, all ports are displayed with an orange color
(regardless of their link state) whenever the switch is actively linked via one of the 100FX
fiber ports. See Figure 1, “Front Panel Web Page w/ 100FX Link” below.
Figure 1. Front Panel Web Page w/ 100FX Link
Resolved Issues
802.1x Authentication fails and console displays an error message. The local 802.1x
authentication method is now compatible with the Odyssey Access Client (EAP-MD5) and
with the RADIUS server authentication (remote). (7351 and 7352)
Retention of the 802.1x Dynamic VLAN password. When using the Firefox browser you may
now modify the 802.1x password without getting an error message. (7073)

AT-S80 Version 2.1.0 Software Release Notes
PN 613-001006 Rev A 3 Allied Telesis, Inc.
Operational Issues
Boot Time. AT-S80 software takes the following amount of time to boot depending on the
version of firmware you have loaded onto your switch:
Table 1: Approximate Boot Time
Features History
Version 2.0.0
The following features have been added to AT-S80 version 2.0.0 software:
Rapid Spanning Tree Protocol (RSTP)
Simple Network Management Protocol (SNMP) V1, V2c
IP Access List
Password protection
Multi-Administration Accounts
Ingress and Egress Port Mirroring
Static Multicast Address Table
IGMP Snooping
Bandwidth Control (Ingress/Egress) Rate Limiting
Port-Based VLAN
Destination MAC Filter
Firmware Upgrade via HTTP
100FX SFP Support
Statistics Charts in the Web interface
802.1X MAC Base
802.1X Local Dial-In User Table
Version Approximate Boot Time
1.0.0.49 48 seconds
2.0.0 113 seconds
2.1.0 210 seconds

AT-S80 Version 2.1.0 Software Release Notes
PN 613-001006 Rev A 4 Allied Telesis, Inc.
Contacting Allied Telesis
This section provides Allied Telesis contact information for technical support as well as sales and
corporate information.
Online Support
You can request technical support online by accessing the Allied Telesis Knowledge Base:
www.alliedtelesis.com/support. You can use the Knowledge Base to submit questions to our
technical support staff and review answers to previously asked questions.
Email and Telephone Support
For Technical Support via email or telephone, refer to the Support & Services section of the
Allied Telesis web site: www.alliedtelesis.com. Select your country from the list displayed on
the website. Then select the appropriate menu tab.
Returning Products
Products for return or repair must first be assigned a return materials authorization (RMA)
number. A product sent to Allied Telesis without an RMA number will be returned to the sender at
the sender’s expense. To obtain an RMA number, contact the Allied Telesis Technical Support
group at our web site: www.alliedtelesis.com/support/rma.Select your country from the list
displayed on the website. Then select the appropriate menu tab.
Sales or Corporate Information
You can contact Allied Telesis for sales or corporate information through our web site:
www.alliedtelesis.com. Select your country from the list displayed on the website. Then select
the appropriate menu tab.
Obtaining Management Software Updates
New releases of management software for our managed products are available from either of the
following Internet sites:
Allied Telesis web site: www.alliedtelesis.com
Allied Telesis FTP server: ftp://ftp.alliedtelesis.com
You must have FTP client software to download new software from the Allied Telesis FTP server
from your workstation’s command prompt and you must log in to the server. The user name is
“anonymous” and your email address is the password.
Copyright ©2008 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis,
Inc.
Allied Telesis is a trademark of Allied Telesis, Inc. Microsoft and Internet Explorer are registered trademarks of
Microsoft Corporation. Netscape Navigator is a registered trademark of Netscape Communications Corporation. All
other product names, company names, logos or other designations mentioned herein are trademarks or registered
trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and other information contained in this
document without prior written notice. The information provided herein is subject to change without notice. In no event
shall Allied Telesis, Inc. be liable for any incidental, special, indirect, or consequential damages whatsoever, including
but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied
Telesis, Inc. has been advised of, known, or should have known, the possibility of such damages.