ALLMOVE X10 Pro User manual

626-6216846
[email protected]
allmoveofficial
allmoveofficial
Questions? Comments?
We are here to help anytime!
USER GUIDE
Electric Scooter
X10 Pro

allmoveofficial
allmoveofficial
Thank you for your trust and choosing the ALLMOVE X10Pro!
Welcome to the ALLMOVE community and it's our pleasure to
guide you through setting up your scooter and hitting the road!
Please read this user guide carefully to get familiar with the proper
operation of the assembly, controls, features, limitations, safety
precautions and general maintenance of your electric scooter. And
retain this manual for future use and reference.
Before riding, be sure all the parts are properly tightened, that the
scooter is working properly, and wear protective equipment. Obey
local traffic laws.
Join Us!
626-6216846
allmoveofficial
allmoveofficial
[email protected]
www.allmove.store
CONTENTS
X10Pro Diagram ------------------------------------------------------------------------------ 01
LED Display ---------------------------------------------------------------------------------- 03
Speed Modes -------------------------------------------------------------------------------- 03
Specifications -------------------------------------------------------------------------------- 04
Attention Symbols --------------------------------------------------------------------------- 04
Safety Advice ---------------------------------------------------------------------------------- 05
Before Riding ---------------------------------------------------------------------------------- 12
Power Button Operation -------------------------------------------------------------------- 12
Two Style to Start --------------------------------------------------------------------------- 13
Riding Your E-Scooter ---------------------------------------------------------------------- 14
Cruise Control ------------------------------------------------------------------------------- 15
Operating Range ---------------------------------------------------------------------------- 15
ALLMOVE X10Pro APP -------------------------------------------------------------------- 16
Error Codes ----------------------------------------------------------------------------------- 17
Battery Specifications ----------------------------------------------------------------------- 18
Battery Maintenance ------------------------------------------------------------------------ 19
Charging Your X10Pro Scooter ---------------------------------------------------------- 20
Parts List -------------------------------------------------------------------------------------- 06
Preparing Your E Scooter ----------------------------------------------------------------- 07
Safety Precautions --------------------------------------------------------------------------- 09
Fcc Statement -------------------------------------------------------------------------------- 21
Warranty ---------------------------------------------------------------------------------------- 22
BASIC INSTRUCTIONS
ASSEMBLY & PARTS
SAFETY PRECAUTIONS
OPERATIONS
MAINTENANCE
FCC STATEMENT
WARRANTY
[ Please keep the original packaging for future use ]

Thumb Throttle
Brake Lever(R)
Headlight
Folding Hinge Front Shocks
Foot Deck
LED Display
Folding Hook
Handlebar
Brake Lever/Bell (L)
Rear Fender
Taillight
Disc BrakeMotorKickstand
X10 Pro Diagram
01 02

Specifications
LED Display
Speed Mode
Attention Symbols
Headlight
Cruise Control
Speed Speed Modes
Lock
Bluetooth
Error
Mileage
ECO Mode
Pedestrian Mode
Drive Mode
Sport Mode
“MODE”icon instruction
1.MODE icon blinks: non-kick to start
2.MODE icon steady light: kick to start
To activate the different speed modes, ensure the power is on and not in motion.
Press the power button once to switch and the speed mode indicator should light up on
your display
S: Sport mode: 0-20 Mph (0-32 Km/h)
D: Drive mode: 0-15.5 MPH (0-25 Km/h)
E: Eco mode: 0-12.4 MPH (0-20 Km/h)
P: Pedestrian mode: 0-3.7 MPH (0-6 Km/h)
* Speed and Range will depending on load and terrain
Model
Motor
Max Speed
Battery Type
Battery Voltage
Battery Capacity
46.6 in. x 8.2 in. x 20.4 in. (118.4 cm x 21 cm x 52 cm)
46.6 in. x 20 in. x 45.9 in. (118.4 cm x 51 cm x 116.6 cm)
Folded Size
Open Size
Climbing Degree
46.95 lb (21.3kg)
330 lbs (150kg)
24-28 miles (38-45 km)
100V-240V, 50 Hz/60 Hz
Inner Honeycomb Solid Tire
10" Front & Rear
2A8DT-R10X
(Front)Drum Brake
(Rear)Disc Brake
E-ABS Brake
Net Weight
Max Load
Max Range
Power Requirement
Tire Type
Tire Size
FCC ID
Brake
X10Pro
500W Brushless Motor
20 mph (32 km/h)
Lithium-ion
36V
10Ah
20°
About 6 HoursCharging Time
CAUTION
WARNING
NOTES
In this manual, the "CAUTION" sign indicates a hazardous situation, Possible dangerous
to your life and health if not avoided
In this manual, the "WARNING" sign indicates a hazardous situation, Can cause death or
serious injury if not avoided.
Recommendations and meaningful additional information
03 04

Parts List
WARNING
NOTES
Check your shipping box and electric scooter carefully to ensure that everything
arrived without shipping problems.
Please take pictures and contact [email protected] if you suspect rough handling.
If you need additional help, please [email protected] for more information.
We update our user guide frequently based on customer feedback
When using this product, basic precautions should always be followed, including the
following:
1. Read all the instructions before using the product.
2. Use only the supplied charger from ALLMOVE with this E-Scooter.
3. To reduce the risk of injury, close supervision is necessary when the product is used
near children.
4. Do not use this product if the flexible power cord or output cable is frayed, has broken
insulation, or any other signs of damage.
5. The operating temperature range of the charger is 32°F - 86°F (0°C - 30°C).
6. The operating temperature range of the Boss is 32°F - 86°F (0°C - 30°C).
7. Store the X10Pro in a dry, ventilated environment.
A. X10 Pro E-Scooter
B. Handle bar Assembly
C. Charger + Charging Cable
D. Allen Wrench & M5 Screws (4)
E. User Guide
User Guide
Safety Advice
Please follow these safety instructions when operating your X10Pro
- Always wear a properly fitted helmet and protective gear while riding.
- See and be seen. Wear reflective clothing and scooter headlight is turned on while
riding at night.
- Learn the rules of the road before riding. Obey all traffic laws.
- Always check brakes before riding.
- Always be aware of the traffic around you.
- Watch for and avoid road hazards.
- At higher speeds, always take longer stopping distances into consideration.
- Reduce speed and maintain a safe braking distance when riding on wet terrain.
- To prevent skidding or potential injuries, do not accelerate or brake suddenly while
making turns.
- Do not leave your E-Scooter in inclement weather.
- When activating pedal assist, increase speed slowly to avoid injury
- Do not use and/or leave the charger outdoors in hot or wet weather conditions.
- Do not ride up or down extremely steep inclines.
- Do not touch the body of the motor immediately after riding, as the surface may be hot.
- Do not make any aftermarket modifications to your X10Pro that are not expressly
approved by ALLMOVE. Improper repairs void the warranty and may place the user at
serious risk.
05 06

Preparing Your E Scooter
WARNING
CAUTION
Please be sure all the items you installed are properly torqued, tightened, and connect-
ed! Please contact us if you have any questions.
Attach the handlebar assembly by placing it into the steering column. Align
the front and back screw holes, and tighten the 4 screws into place using
the hex keys provided.
Folding & Unfolding Your E-Scooter
To fold your X10Pro Scooter, push the folding hinge release button up and pull the
folding hinge down. Push the steering column down to the rear fender.
Align the folding hook with the slot in the rear fender and push the folding hook into it to
lock the X10Pro in a folded position.
To unfold your X10Pro Scooter, push the rear fender down to unlock the folding hook.
Raise the steering column until it is fully vertical. Pull the folding hinge up and press it
against the steering column to ensure it is securely locked.
You will hear a "click", indicating the steering column is locked. Ensure the steering
column is secured in place.
Some parts of your X10Pro Scooter can injure you if mishandled. Moving and folding
parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When
folding and unfolding your X10Pro Scooter, please watch for pinch points where injury
may be sustained. Do not leave your hand in these areas while folding or unfolding.
Great care should be taken with the X10Pro when folding or unfolding it. Moving and
folding parts can cut skin or pinch if mishandled.
DO NOT RIDE YOUR X10PRO SCOOTER WITHOUT ALL RELEASES SECURELY
LOCKED.
Attaching the Handlebar Assembly
Folding & Unfolding Your E-Scooter
Pinch Points
Some parts of your X10Pro Scooter can injure you if mishandled. Moving and folding
parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When
folding and unfolding your X10Pro Scooter, please watch for pinch points where injury
may be sustained. Do not leave your hand in these areas while folding or unfolding.
Pinch Points
07 08

Avoid driving the X10Pro Scooter in unsafe places, including areas with flammable gas,
steam, liquid, dust, or fiber that could cause fire and explosion accidents.
Keep the X10Pro Scooter away from heat sources, direct sunlight, humidity, water, and
any other liquids.
Bend your knees when riding on bumpy pavement to absorb the shock and vibrations.
This will help you keep your balance.
If you are unsure if you can safely ride on a specific terrain, step off and carry your
scooter. Always be on the side of caution.
If you are riding near other riders, be sure to maintain a safe distance between each
other to prevent collisions.
Be sure to keep your feet on the scooter at all times. Moving your feet off the scooter
while driving is dangerous and may cause the scooter to stop suddenly or veer
sideways.
Safety Precautions
WARNING
PLEASE READ THE USER GUIDE THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in the operation
manual may result in damage to your electric scooter, property damage, serious bodily
injury, or even death.
To avoid collisions, falls and loss of control, learn how to ride your X10Pro electric
scooter by reading the user guide and watching the video.
All users are responsible for any consequences caused by violating warning contents or
proper operations. ALLMOVE cannot be held liable.
LOW TEMPERATURE WARNING
SAFETY INSTRUCTIONS
Low temperatures will affect the lubrication of moving parts inside the X10Pro Scooter,
increasing internal resistance. Additionally, the discharge capacity and capacity of the
battery will be significantly decreased.
Use caution when riding the X10Pro in cold temperatures (below 40°F/4°C). Doing so
may increase the risk of mechanical failures of the X10Pro, which may lead to damage to
your device, property damage, serious bodily injury, and even death.
Not recommended for the following people:
- Young children and the elderly
- People with head, back, neck ailments, or prior surgeries to those areas of the body
- People with any mental or physical condition
- People who are pregnant or have a heart condition
The X10Pro Scooter is subjected to wear and high stresses, different materials and
components may react to wear or fatigue in different ways. If the design life of a compo-
nent has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any
form of crack, scratch, or change of coloring in highly stressed areas indicate that the life
of the component has been reached and it should be replaced.
- Do not ride above your skill level. Ensure you have had enough practice with all
functions and features of your X10Pro Scooter.
- Do not ride too fast – with increased speed comes increased risk.
- Do not ride with pets.
- Do not operate the scooter while under the influence of drugs or alcohol.
- Do not operate the scooter when you are restless or sleepy.
- Do not ride your X10Pro off of curbs, ramps, or attempt to operate in a skate park,
empty pool, or in any way similar to a skateboard. Misuse of your X10Pro voids the
warranty and may lead to injury or damage.
- Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or near
rough and rugged terrain.
- Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads, or in extreme heat or cold.
- Do not apply sudden or excessive force to your brakes. Apply your brakes gradually
and give yourself enough room to come to a complete stop safely. Proper use of your
brake is vital to ensure safe, efficient stopping.
- Do not operate the scooter in crowded areas. Operate your scooter with extreme
caution when indoors, especially around people, property, and narrow spaces.
- Do not operate the scooter while talking, texting, or looking at your phone.
- Do not ride your scooter where it is not permitted.
- Do not attempt to jump on or off your scooter.
- Do not attempt any stunts or tricks with your X10Pro.
09 10

Before Riding
Power Button Operation
NOTES
ALLMOVE is not liable for tickets or violations given to riders who do not follow local laws
and regulations.
Different localities and countries have different laws about riding electric transportation
devices on public roads. You should check with local officials to ensure you are comply-
ing with local traffic law requirements.
For your safety, always wear a helmet that meets safety standards. In the event of an
accident, a helmet can protect you from serious injury and in some cases, even death.
- Do not ride your Boss near motor vehicles or on public roads.
- Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
- Ride with traffic, not against it.
- Give pedestrians the right-of-way.
- Do not ride too close to pedestrian. Alert them if you intend to pass them from behind.
Slow down at all street intersections and look to the left and right before crossing.
If you are riding your E-Scooter in low-visibility conditions, ensure your headlight is
turned on, and that you are wearing bright, reflective clothing.
Please wear all appropriate safety gear before operating your device.
Ensure that your X10Pro is in proper working order each and every time you ride. If it is
not working properly can cause you to lose control and fall. Do not ride a X10pro with a
part that is damaged, replace the damaged part before riding.
If a part of the Boss E-Scooter does not function correctly, please contact our Customer
Support.
Ensure the battery is fully charged before riding your E-Scooter. You may need to charge
the battery every 2 months to maintain battery life if it is not used for an extended period
of time.
It is important that you fully understand all the functions of your Boss E-Scooter. If these
fuctions are not used correctly, you will not have full control of your Boss.
Practice using the Boss at slower speeds in a flat, open area before taking it out into
public areas.
①Long press 2S to power on
②Long press 2S to turn off, 10 minutes without operation automatically shut down
③Press 1 time to switch speed mode
④Press 2 times in quick to turn on/off the headlights
⑤Press 3 times in quick to switch the unit km/h, km and mph, miles
⑥Press 4 times in quick to turn on/off the cruise control
⑦Press 5 times in quick to switch the zero start and non-zero start
⑧Press 6 times in quick to switch the TRIP (single mile) and ODO (total mileage）
- Do not operate the X10Pro Scooter if it has been exposed to water, moisture, or any
other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to
the X10Pro Scooter.
- Do not use the X10Pro Scooter if it has been dropped or damaged in any way.
- Do not puncture or harm the exterior surface of the X10Pro Scooter in any way.
- Do not use this X10Pro Scooter for anything other than its intended use or purpose.
- Doing so may damage the X10Pro Scooter or lead to property damage, injury, or death.
- Do not expose the batteries to excessive heat such as direct sunlight or an open flame.
- Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact
with moving parts, wheels, or the drivetrain while the X10Pro Scooter is running.
- Do not operate or allow others to operate the X10Pro Scooter until the user under-
stands all instructions, warnings, and safety features described in this manual.
11 12

Two Style to Start Riding Your E-Scooter
WARNING
CAUTION
Select your preferred start style.
Press 5 times in quick to switch the zero start and non-zero start.
Non-zero start-Needs a kick first
For safety, the E-Scooter will not accelerate and the throttle is not available unless it has
reached a speed of at least 1.8 mph (3 km/h). You must first kick off the ground and then
press the throttle to get on the E-Scooter.
Zero start - Start directly
Turn on the power and depress the electronic throttle to start.
For your safety, be sure to take the initiative to turn off the power in a timely when you
stop. To avoid unintentional pressure the throttle to accidental start caused by personal,
property and other injuries
FAILURE TO FOLLOW ANY OF THE SAFETY PRECAUTIONS IN THIS GUIDE CAN
LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY,
LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD
TO DEATH
OPERATING YOUR DEVICE
- Make sure the device is fully charged before the first use. Before turning on your
X10Pro E-Scooter, ride it like a normal kick scooter to get comfortable with the device
before using it with the motor.
Follow the start style you choose
- To slow down, disengage the throttle and squeeze the brake handle to engage the disk
brake. The brake is pressure-sensitive, so a tighter squeeze will provide more stopping
power.
- The X10Pro E-Scooter can be operated manually if you do not wish to use the motor.
- Do not turn sharply or at high speeds.
- Do not turn or ride quickly along slopes, as it may cause injury.
- Proper use of your brake is vital to ensure safe, efficient stopping.
- To avoid misuse and potential injury, do not apply sudden or
excessive force to your brake.
- Apply the brake gradually and give yourself enough room to come to a complete stop
safely.
13 14

Cruise Control ALLMOVE X10 Pro APP
Operating Range
CAUTION
Quickly press the power button 4 times to turn on the cruise control, then press the
throttle to the end for about 6S, you will hear a beep indicating that the scooter is in
cruise control, release the throttle and the scooter will go by itself.
Push the throttle down once or squeeze the brake handle to cancel the cruise control.
The X10Pro can travel up to 24-28 miles on a fully charged battery under ideal riding
conditions. The following are some of the major factors that will affect the operating
range of your device:
Terrain: Operating Range is highest when riding on a smooth, flat surface. Riding uphill
and/or on rough terrain will reduce operating range significantly
Weight: A lighter user will have higher operating range than a heavier user.
Ambient temperature: Please ride and store the E-Scooter in recommended tempera-
tures. This will increase the operating range, battery life, and overall performance of your
device.
Speed and Riding Style: Maintaining a moderate and consistent speed while riding
produces maximum operating range. Traveling at high speeds for extended periods of
time, frequent starts and stops, and idiling will decrease operating range.
Speed and weight limits are set for your own safety. Please do not exceed the limits
listed in the “SPECIFICATIONS” section of this manual.
Scan the QR code below or download the "Tuya
Smart" app from the App store.
• Power on your scooter, open the app and select"sign up" or "log in".
• Complete any updates that are prompted.
• Click the button on the top right corner(+)to add device
• Click Add Manually at the top of the screen
• Select the"Accesslocation" and "Enable Bluetooth", and then click"Auto Scan"
• After searching,an available device that can be connected appears, click "Next"
• As shown in the picture, the status is"connecting". Once the connection is estab-
lished, it will automatically add the device to the home page. Subsequently, the next time
you open the app, you can directly select the device.
• Lastly,click"done"to complete.
DISCONNECT THE EQUIPMENT
· Select the icon" "on the top right corner of the app product screen.
· Select"Remove Device" button at the bottom.
· Lastly,"Disconnect and wipe data"to remove device from the app product panel.
15 16

Maintenance
WARNING
The electronics system has the ability to self-diagnose and report a limited set of errors.
Errors will appear on the screen as error codes.
The chart below explains the meaning of each error code:
ADVANCED MATRIX DISPLAY - ERROR CODE CHART
Error Code
E1
E2
E3
E4
E6
E9
Brake Error
Accelerator
Error
Communication
Error
Over Current
Protection
Over Voltage
Protection
Controller
Error
Accelerator assembly failure,
or communication error with
the controller.
Communication error between the
instrument panel and the controller.
Damaged wire or loose connector,
or faulty instrument panel or controller.
Controller issue, controller needs to
be replaced
Battery voltage is too high.
Replace the battery
Controller error,controller
needs to be replaced
Brake assembly failure,
or communication error
with the controller.
Error Solution
- To avoid damage to the X10Pro's internal circuitry, do not expose it to liquid, moisture,
or humidity.
- Do not use abrasive cleaning solvents to clean the X10Pro.
- Do not expose the X10Pro to extremely high or low temperatures, as this will shorten
the life of the device, destroy the battery, and/or distort certain plastic parts.
- Do not dispose of the X10Pro in fire as it may explode or combust.
- Do not let the X10Pro come into contact with sharp objects, as this will cause scratches
and damage.
- Do not let the X10Pro fall from high places, as doing so may damage the internal
circuitry.
- Do not attempt to disassemble the X10Pro.
- Use only the charger provided by ALLMOVE.
- Use only the manufacturer's authorized replacement parts.
Avoid using water or other liquids for cleaning. If water or other liquids enter the scooter,
it will cause permanent damage to the internal components.
Users who disassemble the X10Pro without permission from ALLMOVE will void the
warranty.
Battery Type: Rechargeable lithium-ion battery
Charge Time: About 6 hours
Battery Voltage: 36V
Battery Capacity: 10Ah
Working Temperature: 32°F - 86°F (0°C - 30°C)
Charging Temperature: 32°F - 86°F (0°C - 30°C)
Storage Time: 1 year
Storage Temperature: 32°F - 86°F (0°C - 30°C)
Storage Humidity: 5% - 95%
Battery Specifications
17 18
Error Codes

Battery Maintenance
WARNING
WARNING
CAUTION
The lithium-ion battery is built into the X10Pro Scooter. Do not disassemble the X10Pro
Scooter to remove the battery or attempt to separate it from the X10Pro Scooter.
When charging the X10Pro Scooter, only use the enclosed 1-pin charging cable provid-
ed by ALLMOVE. Use of any other charger or cable may lead to damage to the X10Pro
Scooter, overheating, and risk of fire. Use of any other charger or cable voids the
manufacturer warranty.
Do not connect or attach the X10Pro Scooter or the battery to a power supply plug or
directly to a car’s cigarette lighter.
Do not place the X10Pro Scooter near a fire or leave it out in direct sunlight. Heating the
X10Pro Scooter can break or ignite the battery inside the device.
Do not continue charging the battery if it does not recharge within the specified charging
time. Doing so may cause the battery to become hot, rupture, or ignite.
To preserve natural resources, please recycle or dispose of batteries properly. This
product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal
of lithium-ion batteries in ordinary trash. Consult your local waste authority for informa-
tion regarding available recycling and/or disposal options.
Failure to follow the safety precautions listed below could lead to serious bodily injury
and/or death
Do not attempt to modify, change, or replace your battery.
Do not use your device if the battery begins to emit odor, overheats, or begins to leak.
Do not touch any leaking materials or breathe fumes emitted.
Do not allow children or animals to touch the battery.
The battery contains dangerous substances. Do not open the battery or insert anything
into the battery.
Do not attempt to charge the device if the battery has discharge or emits any substances.
In that case, immediately distance yourself from the battery in case of fire or explosion
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY
SUBSTANCE THAT IS EMITTED FROM THE BATTERY
Only use the included charging cable and charger to charge your X10Pro Scooter. Using
any unauthorized charger may damage your X10Pro Scooter.
19 20
Ensure that the charging port is clean and dry.
Make sure that there is no dust, debris or dirt inside the port.
Plug the charger into a grounded wall outlet.
Connect the cable with the power supply.
Align and connect the 1-pin charging cable into the charging port of the X10Pro E-Scoot-
er (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE
PRONGS TO BEND OR BREAK).
The charging indicator light on the charger itself should change to Red, indicating that
your device is now being charged.
When the red indicator light on your charger changes to Green, then your device is fully
charged.
After fully charging your Boss, unplug the charger from your device and from the power
outlet.
Charging Your X10Pro Scooter

FCC Statement Warranty
NOTES
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warranty Statement
This limited warranty is applied to X10 Pro Scooter. All electric scooters come with one
year limited warranty.
This Warranty starts on the date of your purchase and lasts for 1 year ( the “ Warranty
Period” ).The Warranty Period is not extended if the Product is repaired or replaced.
Warranty period begins on the date of receipt. Please retain a copy of your receipt as
this will be required to prove the date of purchase should a warranty claim be activated.
The following conditions are not covered by the warranty :
(1) Damage caused by any water damaged, human factors, including improper use and
failure to keep in accordance with the instructions.
(2) This limited warranty doesn’t cover any problem that is caused by conditions,malfunc-
tions, or damage not resulting from defects in material or workmanship. This conditions,
may include, but not limited to, road hazards, accidents and improper operation or
maintenance.
Important Tips: Do not disassemble the Product. Disassembling the Product will void this
Warranty. Only X10 Pro scooter manufacturer or third party authorized team can perform
the service on this Product.
Manufacturers' warranties may not apply in all cases, depending on factors such as use
of the product, where the product was purchased, or who you purchased the product
from. Please review the warranty carefully, and contact the manufacturer if you have any
questions.
If you ever do have any issue we will resolve it quickly. Buy with condence, buy Allmove.
For more detailed information about the warranty, contact [email protected]
21 22