AllPetSolutions Automatic Pet Feeder User manual


User Guide

2
Thank you for purchasing the All Pet Solutions Automatic Pet
Feeder®.
This User Guide is intended to provide you with guidelines to
ensure that operation of this product is safe and does not pose
risk to the user.
Any use that does not conform to the guidelines described in
this User Guide may void the limited warranty.
Please read all directions before using the product and retain
this guide for reference. This product is intended for household
use only.
This product is covered by a limited one-year warranty.

3

Top Cover
Food Scale
Body
LED Control Panel
Top Cover
Food Outlet
Food Tray
Speakers
Power Switch
Rubberised Feet
DC Power
Socket

4

• Do NOT use this device for puppies and kittens under 7
months.
• Do NOT immerse control panel in water. The base of the unit
should NOT be submerged in water at anytime, as this may
damage electronic components.
• Do NOT place anything on top of the pet feeder.
• Dispose of all packaging materials properly. Some items may
be packed in polybags; these bags could cause suocation;
keep away from children and pets.
• To reduce the risk of injury, close supervision is necessary
when an appliance is used by or near children.
• Intended for use with dogs or cats only.
• Do NOT use outdoors. FOR INDOOR HOUSEHOLD USE ONLY.
• For dry food use only.
• Do NOT use wet, canned or moist food.
• Pet feeder should be placed on a level surface.
• Before leaving for extended time, always replace batteries
with new batteries.
• Do NOT disassemble the pet feeder other than components
as instructed in this operating guide.
• Do NOT unplug by pulling on power cord. To unplug, grasp
the plug, not the power cord.
• Do NOT operate if it has a damaged power cord or plug.
• Do NOT place or store the feeder where it can fall or be
pulled into a tub or sink.
• Examine the pet feeder before installation. Do NOT plug in if
there is water on the power cord or plug.
• To avoid tripping, always position power cord out of the way.

5
Caution
• Do NOT allow pets to chew on or swallow any parts.
• Do NOT attempt repairs on the pet feeder yourself.
• Do NOT install or store pet feeder where it will be exposed to
weather or temperatures below 5°C.
• Do NOT lift pet feeder by lid. Lift and carry feeder using both
hands and hopper base, while keeping unit in upright position.

6
Before using the automatic feed dispenser:
Plug it into the mains supply. Turn on the main switch at the
base. Fill the automatic feed dispenser with dry feed. Place the
lid on the feed container and turn it to lock it in place securely.
Now open the bowl by pressing against it and pulling it out.
Unlocking the screen
Press both arrow keys simultaneously for several seconds
to release or activate the button lock. The screen will lock
automatically after a minute if you do not manually lock it.

Lock
Time Up/Down
Arrows
Feeding
Schedules
SET
MIC
Voice Record
Voice MIC
Unlock
Setting the time
1. Press SET. The hour will start ashing. Use the arrow keys to
select the hour you want and save with SET.
2. Now the minutes start ashing. Choose the minutes and
save with SET.

7
Programming the feeding times
1. Now the hour and the rst circle should be ashing. You can
choose the rst feeding time in the same way as you chose the
time and conrm with SET.
2. Next, you can select the number of portions for the rst
preselected meal. Choose the portion size with the arrow keys
(1 portion =12 ml) and conrm with SET. You can set at most 8
portions per meal.
3. Repeat these steps for all 6 feeding times (each circle on the
display stands for one feeding time). If you prefer to have fewer
feeding times, press SET for about 1 second after your last
feeding time. The feeding times are saved.
Manual feeding
Press the upward arrow for 1 second. A single portion will be
dispensed.

8
Voice recordings
1. To play a voice recording before the feeding time, keep MIC
pressed and record your voice message whilst the bell symbol
is ashing. Make sure to be close to the feeder’s body whilst
speaking.
2. The recording can be up to 10 seconds long. If you’d like it to
be shorter, simply let go of the MIC button.
3. To listen to your recording, press the MIC button.
4. To change the recording follow the steps above.
Factory reset
Press SET. Now the chosen hour is ashing. To delete all preset
settings, keep MIC pressed for several seconds. The feed
dispenser is reset.
The feeder won’t dispense the food if it gets stuck.
Please make sure you only use dry food which is 5-15
mm in diameter.

9
1. Be sure the unit is turned o and power is disconnected
before attempting to clean.
2. Wipe with a soft cloth dipped in a small amount of soapy
water. Do not use a fully soaked cloth.
3. Food tray and food compartment can be removed for
cleaning. These are dishwasher safe.
4. Never submerge the base of this unit in water as it contains
vital electronics and may short circuit.
5. Ensure that all parts are clean and fully dry before
attempting to operate or re-ll the food compartment.
Food Compartment Assembly/Disassembly
Hold both sides of the food bucket and lift upwards to remove.
Align the food bucket with main body to reinsert.

Food Tray Assembly/Disassembly
Remove the feed bowl by lifting it a bit and pulling it out.

All Pet Solutions Ltd, 203 Riverside Way,
Uxbridge, UB8 2YF, United Kingdom
www.allpetsolutions.co.uk