Allview M9 Jump User manual

1
M9 Jump
User manual…………….…….…4
Manual de usuario………….....29
Felhasznaloi kezikonyv…….....51
Instrukcja obsługi……………...72
Manual de utilizare……….……91

2

3
EN
ES
HU
PL
RO
1
Power button
1
Botón de encendido
1
Bekapcsoló gomb
1
Przycisk zasilania
1
Buton pornire
2
Speaker
2
Altavoz
2
Hangszóró
2
Głośnik
2
Difuzor
3
Lock/unlock
rear cover
3
Bloqueo/Desbloqueo
de la cubierta
posterior
3
Akkufedél zár
3
Zablokuj/odblokuj
tylną osłonę
3
Blocare/deblocare
capac spate
4
Flashlight
button
4
Botón de la luz del
flash
4
Zseblámpa gomb
4
Przycisk latarki
4
Buton lanterna
5
Volume
buttons
5
Botones del volumen
5
Hangerőszabályzó
gombok
5
Przyciski
głośności
5
Butoane volum
6
Flashlight
6
Luz del flash
6
Zseblámpa
6
Dioda latarki
6
Lanterna
7
Back
7
Atrás
7
Vissza
7
Cofnij
7
Inapoi
8
Camera
8
Cámara
8
Kamera
8
Aparat
8
Camera
9
Hang rope
hole
9
Agujero para la
cuerda
9
Karpánt rögzítő
9
Otwór na linkę
9
Orificiu snur
10
Delete button
10
Botón de borrado
10
Törlés gomb
10
Przycisk
usuwania
10
Buton stergere
11
Earphones
plug
11
Enchufe
11
Fülhallgató plug
11
Złącze
słuchawkowe
11
Mufa casti
12
Micro USB
plug
12
Enchufe micro USB
12
Micro USB
12
Złącze micro USB
12
Mufa Micro USB

4 EN
User Manual
FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment. Do not use the device where
blasting is in progress.
Please keep this cell phone away from children, as they could mistake it for a toy, and hurt
themselves with it. Don’t try to modify the phone except by the professional. Warning! Only use the
authorized spare parts, otherwise it may damage the phone and the warranty will not work. And it
may be dangerous.
SWITCH OFF WHEN REFUELING
Don’t use the phone at a refueling point. Don’t use near fuel or chemicals.

5 EN
SIM CARD AND T-FLASH CARD ARE PORTABLE
Pay attention to these small things to avoid children eating them.
Notice: The T-Flash Card can be used as a Memory Disk, the USB cable is necessary.
BATTERY
Please do not destroy or damage the battery, it can be dangerous and cause fire. Please do not
throw battery in fire, it will be dangerous When battery cannot be used, put it in the special container.
Do not open the Battery.
If the battery or the charger is broken or old, please stop using them.
USE QUALITY EQUIPMENT
Use our authorized equipment or it will cause dangers
ROAD SAFETY COMES FIRST
Give full attention while driving; Pull off the road or park before using your phone if driving conditions
so require.
INTERFERENCE
All wireless devices may be susceptible to cause interference, which could affect performance.

6 EN
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft. It’s not only dangerous but also illegal to use
mobile phone in an aircraft. Warning: We take no responsibility for situations where the phone is
used other than as provided in the manual. Our company reserves the right to make changes in the
content of the manual without making this public. These changes will be posted on the company
website to the product it amends.
The contents of this manual may be different from that in the product. In this last case will be
considered.
Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the mobile phone in the environment at too high or too low temperature, never expose
the mobile phone under strong sunshine or too wet environment.
The maximum operating ambient temperature of the equipment is 40℃.

7 EN
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits
are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that
follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that
follow the Council of the European Union limit. Tests for SAR are conducted using standard
operating positions with the device transmitting at its highest certified power level in all tested
frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar
option to keep this device away from your head and body. Carry this device at least 5 mm away
from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt
clips, holsters, or other similar body-worn accessories which do not contain metallic components to
support operation in this manner. Cases with metal parts may change the RF performance of the
device, including its compliance with RF exposure guidelines, in a manner that has not been tested
or certified, and use such accessories should be avoided.

8 EN
For your safety, it is recommended that, during charging, you don’t keep the device near your body,
and that you place it on an inflammable stand. We recommend that, during nighttime, you put the
phone away from you at a minimal distance of 1 meter.
GETTING STARTED
Battery Install Notice
Before you install or change battery, please ensure you already turn off the phone.
Install or change SIM card Notice
1. Before you change SIM card, please make sure you already turn off the phone and dispose
battery.
2. Insert the SIM card and make the golden contact area face down and the nick face out.
Charge the battery
1. Before charging the battery, please make sure that the battery is installed properly in the phone.
2. Connect the charger lead to the phone socket, and then connect the charger to the AC socket.
3. If the phone is off when it’s charging, charging indicator is displayed on the screen. If the phone
is on when it’s charging, user can use it while charging. When the battery is fully charged, the

9 EN
4. charging indicator on the screen is full and stops twinkling. While using the handset for the first
time, please completely discharge and then completely charge the battery. Repeat the process for
three times to achieve the full performance of the battery.
5. Long period unused or some other reasons may cause low battery pressure, so at the beginning
of charging the screen is black and it may take a while before the charging indicator appears.
Warning: When charging, in order to avoid serious damage to phone circuitry, do not remove or
dispose the battery.
CALLS
Key Explanation
Lock Keypad: Press * then select “Lock”
Unlock Keypad: Left Side then press *
* Key # Key:
Functions vary in different situations or function menus:
- In inputting status, “*” for symbols.
- In inputting status, “#” to switch inputting methods.
- In standby mode, hold “#” to switch the phone in silent mode.

10 EN
- In standby mode, input “+” for an international call; in dial status, input “P” for calling number with
extension phone.
Main Menu Explanation
When you press Menu key, you will enter main menu. Press up, down, left and right keys to select
different functions.
Make a Call
Making a call by dialing numbers:
1. In standby mode, enter the phone number. If you want to change the numbers, press left and
right direction key to move the cursor and press〈Clear〉to delete a number. Press and hold 〈
Clear 〉to delete all characters.
2. Press the call key to call the number.
Making a call using the Phonebook:
You can enter the phonebook list from functional menu, choose or input the needed letter (phonetic)
to search. Choose the number; press the call key to dial out.
Call the Dialled calls, Received calls,