Alpha Therm FOX-1SH User manual

Product specifications and accessories may be changed at any time
based on improvements and other reasons.
Output
Sensor
CAUTION
SAFETY
Available
communi.
Range
Model
Cautions for your safety
series
series
Digital Humidity Controller
User's Manual
T/H sensor
H. sensor
Setting(UP)
Setting(DOWN)
Setting key(SET)
Output
Humidity display(FOX-1SH(R)model)
Temperature display(FOX-1SH(R)model)
Part name
1
model applied
sensor
Design of practical utility No. 0301508
Registration of desing No. 0316273
Humi./Temp. diplay mode
This product is a humidity controller, temperature is displayed in add-ons.
Caution1.
The temperature is display only, please note that control is not.
only
Setting range
Setting range
Sensor input correction menu
Setting range
Sensor heating menu
Present temp. & humi.
output deviation
changing menu
setting range
selection
of function
setting range
H(humidity)/d(dehumidity)
Humi./Temp. mode changing
Setting range
Ref 1. If press for more than 5 sec in the current state, the program setting mode to enter.
Ref 2. All the program after setting, if press for more than 3 sec or after 60 sec, automatically return
to the current of humidity display after displayed O-K.
Present temp. & humi.
output deviation
changing menu
Sensor input correction menu
Setting range
selection
of function
setting range
H(humidity)/d(dehumidity)
setting range
Ref 1. If press for more than 5 sec in the current state, the program setting mode to enter.
Ref 2. All the program after setting, if press for more than 3 sec or after 60 sec, automatically return
to the current of humidity display after displayed O-K.
Version 0.96(2015.08.25)
1
1
% %
.
Model Composition

(dehumidity)
present humidity present humidity
setting
humidity
setting
humidity setting
humidity
ON : present humidity
setting humidity +DIF
OFF : present humidity
setting humidity
ON : present humidity
OFF : present humidity
setting humidity -DIF
setting humidity
g
1
0
(shield)
(shield)
(shield)
p
p
1
1
an
present humidity
Application for humidity controller
3
47
User’s setting humidity changing
Program setting
3
Program setting
User’s setting humidity changing
present humidity
1~19
Application for humidity controller
3
47
present humidity
User’s setting humidity changing
Program setting
3
User’s setting humidity changing
Program setting
present humidity
In the event that ERROR is indicated during the use of a product
In case of , the memory elements of the various internal
data are damaged due to the strong noise from outside.
In this case, request the after-sale service to our company.
As for this regulator, the supplementation measures are
established against the above noise,however, it cannot
endure noise unlimitedly. If noise flows in (more than
2KV), the interior can be damaged and destroyed
The specifications of the above product are subject to
change without a prior notice to improve the performance
of the product. Please comprehend the contents specified
in the above precautions,and observe them without fail.
Regarding the manual in English, please download it at
our website.
In case of , a failure in the data communication with
the sensor. Please check connection state, connection
order, short-circuit and disconnection. If it is not resolved
even after checking, please contact dealer or us.
will be displayed when humidity exceedsor
the display range. Request to our A/S when it displayed
in the same error even if keeping the surrounding humidity
to a normal state.
Quality Warranty: 1 year from the date of purchase
Alpha Therm GmbH
Gewerbering 7
68723 Plankstadt
Germany
Phone: (+49) 6202 / 575688 - 0
Fax: (+49) 6202 / 575688 - 0
E-Mail: [email protected]
Web: www.alpha-therm.com