Alpha TYB002 User manual

TYB002 1GUIDE p
ALPHA SUPPORT PHONE [phone]
Monocrystalline silicon solar panel (high photoelectric conversion efficiency and good stability;
this is the highest photoelectric conversion efficiency of all types of ar panels at present).sol
TYB002 Solar Panel Manual
1. PRODUCT APPEARANCE
2. PRODUCT FEATURES
3. TECHNICAL DATA
4. BATTERY CHARGING SOLUTION
Front
A. Sunlight
Backside
B. Adaptor
Open-circuit voltage of solar panel: 17V
Built-in 6 rechargeable lithium batteries
Battery capacity: 4400mAh
Adapter can be fully charged in 6 hours
Output interface: waterproof plug
Discharge temperature: -20°C to 65°C
Applicable motor type: WSERD40 or WSERD50
Protection Index: IP40
Output power: 4w
Output voltage: 11.1V
Lifetime: charge/discharge 500 times
Power adapter specs: output DC16.8V/1A
DC3.5x1.35
Charging temperature: 0°C to 45°C
Working temperature: 0°C to 45°C
Overall dimensions: 546mmx89.6mmx32mm

TYB002 2GUIDE p
ALPHA SUPPORT PHONE [phone]
5. INSTALLATION
A. Horizontal Installation
B Vertical. Installation
Figure 1 Figure 2 Figure 3
Figure 1 Figure 2 Figure 3
Figure 1 Figure 2 Figure 3
STEEL STRUCTURE INSTALLATION DIAGRAM
STEEL STRUCTURE INSTALLATION DIAGRAM
CONCRETE WALL STRUCTURE INSTALLATION DIAGRAM
TYB002 Solar Panel Manual
Fix the bracket to the steel structure
with M5.5 x 38 self drilling screws,
as shown in Figure 1.
Fix the bracket on the concrete wall
with M6 expansion screws.
Fix the bracket on the steel structure
with M5.5 x 38 self drilling screws,
as shown in Figure 1.
Turn the solar panel downward as shown
in Figure 2, then push it into the slot
from left to right.
Turn the solar panel downward as shown
in Figure 2, then push it into the slot
from left to right.
As shown in Figure 2, rotate the solar
panel down to the proper angle, and
then push it into the slot from bottom up.
The final installation is completed,
as shown in Figure 3.
The final installation is completed,
as shown in Figure 3.
The final installation is completed,
as shown in Figure 3.

TYB002 3GUIDE p
Alpha Tubular Motors LLC
1840 S Commercenter Circle
San Bernardino CA 92408
[e-mail]
alphamotors.uswww.
[phone]T
ALPHA SUPPORT PHONE [phone]
TYB002 Solar Panel Manual
CONCRETE WALL STRUCTURE INSTALLATION DIAGRAM
6. ANNOUNCEMENTS
Figure 1 Figure 2 Figure 3
Fix the bracket on the concrete wall
with M6 expansion screws.
Turn the solar panel downward as shown
in Figure 2, then push it into the slot
from bottom up.
The final installation is completed,
as shown in Figure 3.
1. Extension cable can be used if needed, but the longer the cable, the more voltage drop. Please ask your
supplier for professional advice before using extension cable.
2. You are strongly recommended to clean solar panel’s surface to get good exposure from the sun.
3. Any problems you encounter, please reference manual, or ask for professional advice.
4. Keep the product away from children to avoid any hazard.
5. Please remember to respect the local regulations - hand in the non-working electrical equipment to an
appropriate waste disposal center. The packaging material is recyclable. Dispose of the packaging in an
environmentally friendly manner and make it available for the recyclable material collection-service.
6. Any improvements to the product will not be notified in advance.