Alpine GIL1644 User manual

Calm Infinity Fountain with
LED Lights
Have Questions or Issues? Need help with assembly?
Contact us and we will resolve them within 12 hours.
Support Hours: M-F 7:30–5:00 (U.S. Pacific Time)
Call:
877-460-4511
Email:
[e-mail]
Owner’s Manual
Item # GIL1644
V4.0

1
Contents ....................................................... 1
What’s Included ............................................ 2
Features ....................................................... 3
Assembling & Using Your Product ............... 4
Replacement Parts....................................... 8
Troubleshooting............................................ 9
Caution ....................................................... 10
Warranty..................................................... 11
Notes .......................................................... 12
CONTENTS

2
Fountain
(6 LED Lights Pre-installed)
1x
Back Door Pump
1x 1x
WHAT’S INCLUDED

3
Power Requirements...... Standard Household 120V
Water Capacity.................3.5 US Gallons / 13 Liters
Tubing Diameter......................... 0.5in / 1.25 cm I.D.
FEATURES
•Flowing water adds
a soothing sound
to any environment
SPECIFICATIONS
•Made of
lightweight,
durable
polyresin
materials
•Modern, geometric design
with stone-like texture

4
Unpack all components carefully. Please check
to ensure all parts have been removed from the
packaging.
1. Place the Fountain on a smooth & level surface.
Allow enough space to access the pump.
2. Remove the Pump from its packaging and set
the water flow to its lowest setting to avoid
splashing until the fountain is completely
assembled.
ASSEMBLING & USING YOUR PRODUCT
Alpine Quick Tip #1
Turn adjuster left to
increase the water
flow. Turn to the right
to decrease flow.

5
3. Pull out the tubing from the back opening of the
Fountain, and attach it to the Pump. NOTE:
Tubing may be zip-tied to the LED cords. Cut
zip-ties carefully to separate.
4. Take the LED cord out of the back opening of
the fountain and attach it to the connector on
the pump. Twist the protective sheath to secure
the connection. Place the Pump into the
fountain at the bottom of the basin.

6
5. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing.
Make sure the water completely submerges the
pump and the water runs clear during operation.
NOTE: We recommend that you use distilled
water to prevent scale build-up. The first time you
operate the pump it can take up to 5 minutes for the air
to be completely expelled and water begins to flow
properly
6. Plug the pump power cord into your local power
supply. Make sure that there is no water
around the plug & always keep the power
source in a dry place.

7
7. You can now adjust the water pump to your flow
preference. (see Quick Tip #1) Once set, install
the Back Door Cover by sliding it into the
designated opening.
8. If splashing occurs, you may need to adjust the
flow of each individual water valve. Turn a valve
left or right to increase or decrease the water
flow for a specific spout. See below for which
valve corresponds to which spout.
Alpine Quick Tip #2
Make sure the power
cord is tucked neatly
into the cord slot.
Alpine Quick Tip #3
Adjusting one valve
may affect the flow rate
of the valves
downstream. Balance
the flow by also making
adjustments to the main
flow rate on the pump
1 2 3 4 5 6
6 5 4 3 2 1

8
9. Congratulations, your fountain is now complete.
Don’t forget to add water regularly as water will
evaporate over time.
• Replacement Pump ..................................PAD900
• Fountain Care Formula..............................PPL100
Foam and scale remover for indoor and outdoor fountains.
• Americana® UV Acrylic Sealer .................RRR106
Provides protective clear coating for all painted surfaces.
• Touch Up Paint Kit....................................RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.
REPLACEMENT PART ITEM#
ALSO AVAILABLE FROM ALPINE