Alpine GXT100 User manual

Distressed Pots Fountain with
LED Lights
Have Questions or Issues? Need help with assembly?
Contact us and we will resolve them within 12 hours.
Support Hours: M-F 7:30–5:00 (U.S. Pacific Time)
Call:
877-460-4511
Email:
[e-mail]
Owner’s Manual
Item # GXT100
V2.0

1
Contents ....................................................... 1
What’s Included ............................................ 2
Features ....................................................... 3
Assembling & Using Your Product ............... 4
Replacement Parts....................................... 8
Troubleshooting............................................ 9
Caution ....................................................... 10
Warranty..................................................... 11
Notes .......................................................... 12
CONTENTS

2
Fountain
(LED lights pre-installed)
1x
Back Door Pump Transformer
1x 1x 1x
WHAT’S INCLUDED

3
Power Requirements...... Standard Household 120V
Water Capacity.................5.3 US Gallons / 20 Liters
Tubing Diameter............................................. 1” I.D.
FEATURES
•Flowing water
adds a soothing
sound to any
environment
SPECIFICATIONS
•Made of
lightweight,
durable
polyresin
materials
•LED lights create a stunning night time
display

4
Unpack all components carefully. Please check
to ensure all parts have been removed from the
packaging. *Some splashing may occurwhen the
product is in use.
1. Place the fountain base on a smooth & level
surface. Allow enough space to access the
pump.
2. Remove the pump from its packaging and
adjust the flow control to the lowest setting to
avoid splashing until the fountain is completely
assembled.
ASSEMBLING & USING YOUR PRODUCT
Alpine Quick Tip #1
Twist adjuster to the
Left to increase water
flow. Twist to the Right
to decrease water flow.

5
3. From the back opening of the fountain take the
vinyl tubing and attach it to the Pump, then
place the pump back into the fountain. NOTE:
Tubing may be zip-tied to the LED Light Cords.
Carefully cut zip-ties with scissors to separate.
4. Pull out the LED light cord plug through the
back opening & connect to the transformer.
Screw on the protective sheath for a tight seal.
Alpine Quick Tip #2
There are multiple light
strand connections
inside the fountain.
Make sure each
protective sheath is
properly tightened.

6
5. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing.
Make sure the water completely submerges the
pump and the water runs clear during operation.
NOTE: We recommend that you use distilled
water to prevent scale build-up. The first time you
operate the pump it can take up to 5 minutes for the air
to be completely expelled and water begins to flow
properly
6. Plug the pump and light cord transformer plugs
into your local power supply. Make sure that
there is no water around the plugs & always
keep the power source in a dry place.

7
7. You can now adjust the water pump to your flow
preference. (see Quick Tip #1) Once set,
replace the Pump into the fountain and install
the Back Door cover by sliding it into the
designated opening.
8. Congratulations, your fountain is now complete.
Don’t forget to add water regularly as water will
evaporate over time.
Relax and enjoy your new fountain.
Alpine Quick Tip #3
Make sure your pump
and light cords are
tucked neatly into the
cord slot.

8
• Replacement Pump ..............................P180/P280
• Replacement Top LED Light..................... RLA124
• Replacement Bottom LED Light................ RLA204
• Replacement Transformer .........................PL022T
• Fountain Care Formula..............................PPL100
Foam and scale remover for indoor and outdoor fountains.
• Americana® UV Acrylic Sealer .................RRR106
Provides protective clear coating for all painted surfaces.
• Touch Up Paint Kit....................................RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.
REPLACEMENT PART ITEM#
ALSO AVAILABLE FROM ALPINE