Alpine UTE-80B User manual

Designed by ALPINE Japan
68-24567Z15-A
EN
DE
FR
ES
IT
SE
NL
RU
PL
RR
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE
•OWNER’S MANUAL
Please read before using this equipment.
•ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
•BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
•GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
•MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
•РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
•MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
•INSTRUKCJA OBSŁUGI
Prosimy zapoznać siç z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
•ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: [phone]
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone [phone]
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone [phone]
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone [phone]
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone [phone]
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone [phone]
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone [phone]
DIGITAL MEDIA RECEIVER
UTE-80B

3-EN
Contents ENGLISH
Operating Instructions
WARNING
WARNING....................................................... 4
CAUTION ........................................................ 4
PRECAUTIONS ............................................... 4
Getting Started
Accessory List ...............................................................6
Turning Power On and Off.......................................6
Demonstration Function..........................................6
Source Selection..........................................................6
Detaching and Attaching the Front Panel .........6
Detaching ..................................................................6
Attaching ...................................................................6
Adjusting Volume .......................................................6
Radio
Listening to Radio.......................................................7
Presetting Stations Manually..................................7
Presetting Stations Automatically.........................7
Tuning to Preset Stations .........................................7
Frequency Search Function.....................................7
Sound Setting
Bass Level/Mid Level/Treble Level/Balance
(Between Left and Right)/Fader (Between
Front and Rear)/Loudness/Defeat.........................8
Audio Setup ..................................................................8
Equalizer Presets .....................................................8
Setting BASS ENGINE SQ ON/OFF.....................9
Turning Loudness On/Off ....................................9
Adjusting the Parametric Equalizer Curve
(3BAND EQ) ...............................................................9
Setting the Control ...................................................... 9
Setting the Source Volume Level ......................9
BASS ENGINE SQ Function
Setting BASS ENGINE SQ ON/OFF ...................... 10
Adjusting BASS ENGINE SQ Level....................... 10
Other Functions
Displaying the Text.................................................. 10
Using the Front AUX Input Terminal ................. 11
Option Menu Setting.............................................. 11
SETUP
Setting ..........................................................................12
General Setting .....................................................12
Setting the Menu Language ..................................12
Setting the AUX SETUP mode................................12
Setting the AUX NAME mode ................................12
Setting the Demonstration mode........................12
Display Setting ......................................................13
Dimmer Control ..........................................................13
Scroll Setting (TEXTSCROLL) ..................................13
USB Memory (optional)
Playing MP3 Files from USB Memory
(optional) .....................................................................13
Repeat and Random Play ......................................13
Folder/File Name Search........................................14
Folder Name Search mode................................14
File Name Search mode .....................................14
Search Position Memory ........................................14
Direct Search Function ...........................................14
About MP3 ..................................................................14
Terminology ...........................................................15
Information
In Case of Difficulty ..................................................15
Basic...........................................................................15
Radio .........................................................................15
MP3............................................................................15
Indication for USB Memory...............................16
Specifications .............................................................17
Installation and Connections
WARNING .................................................... 18
CAUTION...................................................... 18
PRECAUTIONS............................................. 18
Installation ..................................................................19
Removal ...................................................................19
Connections ...............................................................20

4-EN
Operating Instructions
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and −10°C (+14°F) before turning your unit on.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
for servicing.
Installation Location
Make sure this unit will not be installed in a location subjected to:
•Directsunandheat
• High humidity and water
• Excessive dust
•Excessivevibrations
Protecting the USB Port
• Only USB Flash Memory devices can be connected to the USB port
on this unit. Correct performance using other USB products cannot
be guaranteed. A USB hub is not supported.
• Depending on the shape or size of a USB memory device, it may not
be connected to the USB terminal of this unit-a USB extension (sold
separately) is recommended for this connection.
Also, avoid connecting USB memory and Front Aux at the same time.
• If a USB device is inserted in the unit, it projects out and may be a
danger while driving.
Use a commercially available USB extension cable, and connect it in a
safe way.
• Depending on the connected USB Memory device, the unit may not
function or some functions may not be performed.
• The audio file format that can be played back on the unit is MP3.
• Artist/song name, etc., can be displayed, however some characters
may not be correctly displayed.
WARNING

5-EN
On Handling USB Memory
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
• To prevent malfunction or damage, note the following points.
Read the USB Memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB Memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
• Fix the USB Memory in a location where driver operation will not be
hindered.
• USB Memory may not function correctly at high or low temperature.
• Use only certified USB Memory. Please pay attention that even
certified USB Memory, may not function correctly depending on its
type or state.
• USB Memory function is not guaranteed. Use USB Memory
according to the terms of agreement.
• Depending on the settings of the USB Memory type, memory state or
encoding software, the unit may not play back or display properly.
• A file that is copy-protected (copyright protection) cannot be played
back.
• USB Memory may take time to start playback. If there is a particular
file other than audio in the USB Memory, it may take considerable
time before the file is played back or searched.
• The unit can play back “mp3” file extensions.
• Do not add the above extensions to a file other than audio data. This
non-audio data will not be recognised. The resulting playback may
contain noise that can damage speakers and/or amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, and then remove the USB
device to prevent possible damage to its memory.

6-EN
Accessory List
• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Mounting Sleeve ......................................................................1
• Bracket Key ...............................................................................2
• Rubber Cap ...............................................................................1
• Hex Bolt.....................................................................................1
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
Turning Power On and Off
Press SOURCE to turn on the unit.
Note
• The unit can be turned on by pressing any other button except e
(Release).
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
Note
• The first time power is turned on, the volume will start from level 12.
Demonstration Function
This unit has a demonstration feature for display. When Demo mode is
set to ON (initial setting), the unit starts the demonstration if there is no
operation for 30 seconds.
When installing this unit in a car for the first time, the DEMO OFF
screen will be displayed for 30 seconds after turning on the unit.
Press ENTER within 30 seconds to turn off the
Demonstration mode*.
Otherwise, the Demo mode remains ON and the unit starts the
demonstration if there is no operation for 30 seconds.
*The operation is the same as setting DEMO MODE to OFF in the
Setup menu. However, if the unit is disconnected from the vehicle's
battery, DEMO MODE will be switched to ON automatically
when the unit is used next time. If you want to completely close the
Demo mode, set DEMO MODE to QUITE OFF. For details,
please refer to “Setting the Demonstration mode” on page 12.
Source Selection
Press SOURCE to change the source.
TUNER USB AUDIO AUXILIARY*TUNER
*Only when AUX SETUP is set to ON. Refer to “Setting the AUX
SETUP mode” on page 12.
Detaching and Attaching the Front Panel
Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
Notes
• Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Getting Started
SOURCE/
e
/ENTER

Rotary encoder
Detaching
Attaching

7-EN
Listening to Radio
1 Press SOURCE to select TUNER mode.
2 Press BAND repeatedly until the desired radio band is
displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3 Press TUNEA.ME to select the tuning mode.
SEEK DX (Distance mode) SEEK LOCAL (Local mode) 
MANUAL (Manual mode) SEEK DX
Distance mode (Initial setting):
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning). The “ ” indicator lights up.
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
In Manual mode, holding down or will change the
frequency continuously.
Presetting Stations Manually
1 Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2 Press and hold for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1 Press BAND repeatedly until the desired radio band is
displayed.
2 Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
• If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press BAND repeatedly until the desired band is
displayed.
2 Press any one of the station preset buttons (1 through 6)
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1 Press ENTER in Radio mode to activate Frequency
search mode.
The “” indicator lights up.
2 Turn the Rotary encoder to select the desired frequency.
3 Press ENTER to receive the selected frequency.
Note
•Pressrin the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.
Radio
SOURCE/
/ENTER

BAND
TUNE/A.ME


Rotary encoder
Preset buttons
(1 through 6)

8-EN
Bass Level/Mid Level/Treble Level/Balance
(Between Left and Right)/Fader (Between
Front and Rear)/Loudness/Defeat
1 Press AUDIOSETUP repeatedly to choose the desired
mode.
Each press changes the mode as follows:
BASS LEVEL*1/*2 MID LEVEL*1/*2 TRE LEVEL*1/*2 
BALANCE FADER LOUDNESS*1/*2 DEFEAT 
VOLUME BASS LEVEL
*1 Adjustable only when DEFEAT is OFF.
*2 Not displayed when BASS ENGINE SQ mode is on. (Page 9)
Note
• If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
2 Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS,
MID, TRE LEVEL and LOUDNESS will return to the factory
defaults.
Audio Setup
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select AUDIO, and then press
ENTER.
Note
• When BASS ENGINE SQ setting is set to OFF (MANUAL SET)
(page 9), you can also activate the Audio Setup mode directly by
pressing BASS.
3 Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER.
EQ PRESETS*1/*3/*4 BASS ENGIN*2 LOUDNESS*1/*3 
3BAND EQ*1/*3/*4/*5 SOURCE VOL EQ PRESETS
(e.g. Select LOUDNESS)
*1 Adjustment cannot be performed when DEFEAT is set to ON.
*2 Not displayed when the Audio Setup mode is activated by
pressing BASS in MANUAL SET mode (page 10).
*3 These items are set uniformly in BASS ENGINE SQ mode by
adjusting BASS ENGINE SQ Level (page 10) and cannot be
adjusted separately. If you want to change these settings
separately, a message is displayed asking you to confirm that you
want to exit the BASS ENGINE SQ mode. Select “YES” to make
the setting.
*4 Any changes made to either EQ PRESETS or 3BAND EQ are
reflected in the other’s settings.
*5 In step 3, three sound adjustment items (Bass, Mid and Treble)
can be selected in 3BAND EQ mode. Turn the Rotary encoder
to select the desired item, and then press ENTER to continue
to step 4.
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select LOUD ON or LOUD OFF)
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Pressingrreturns to the previous Sound menu mode.
• Pressing and holding rfor at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
10 typical equalizer settings are preset at the factory for a variety of
musical source material. USER settings are created in the 3BAND EQ
mode.
Setting item: EQ PRESETS
Setting contents:
USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /
ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL
Sound Setting
Bass level −7 ~ +7
Mid level −7 ~ +7
Treble level −7 ~ +7
Balance L15 ~ R15
Fader R15 ~ F15
Loudness ON/OFF
Defeat ON/OFF
Volume 0 ~ 35
AUDIO/SETUP
/ENTER

BASS
Rotary encoder
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
Equalizer Presets

9-EN
This unit has a BASS ENGINE SQ feature for Sound adjustment.
Setting item: BASS ENGIN
Setting contents:
OFF (Initial setting) / ON
OFF (MANUAL SET mode):
Adjust each audio effect setting separately.
ON (BASS ENGINE SQ mode):
Adjust the Bass relative audio effect settings uniformly by
adjusting the BASS ENGINE SQ Level (page 10).
Notes
• You can also set BASS ENGINE SQ ON/OFF directly by pressing and
holding BASS. Refer to “Setting BASS ENGINE SQ ON/OFF” on
page 10.
• “ ” indicator lights up when BASS ENGINE SQ mode is ON.
• With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
uniformly effects various sound parameters for optimum Bass effect.
Refer to “Adjusting BASS ENGINE SQ Level” on page 10.
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Setting item: LOUDNESS
Setting contents:
LOUD OFF (Initial setting) / LOUD ON
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.
Setting item: 3BAND EQ
Further setting items: BASS / MID / TREBLE
Setting the Control
1 After selecting BASS/MID/TREBLE from the 3BAND EQ
adjustment mode, turn the Rotary encoder to select the
desired setting item, and then press ENTER.
WIDTH (Q) CENTER FRQ LEVEL
2 Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
3 Press rto return to the previous step.
Setting the Bandwidth (WIDTH (Q))
Changes the boosted bandwidth to wide or narrow. A wider setting will
boost a wide range of frequencies above and below the centre frequency.
A narrower setting will boost only frequencies near the centre
frequency.
Setting the Centre Frequency (CENTER FRQ)
Emphasises the displayed frequency ranges.
Setting the Level
You can emphasise or weaken the level.
Note
• The adjustment can also be made by pressing AUDIO. Refer to “Bass
Level/Mid Level/Treble Level/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” on page 8.
The output level of each source is individually adjustable. For example, if
the TUNER level sounds lower than USB, its output can be adjusted
without affecting the other sources.
Setting item: SOURCE VOL
Further setting items: TUNER / USB / AUX
Setting contents:
−14 dB ~ +14 dB
Setting BASS ENGINE SQ ON/OFF
Turning Loudness On/Off
Adjusting the Parametric Equalizer Curve
(3BAND EQ)
BASS WIDE 0.50 MEDIUM 1.00 MEDIUM 1.50 
NARROW 2.00
MID WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25 
NARROW 1.50
TREBLE WIDE 0.75 NARROW 1.25
BASS 60 (Hz) 80 (Hz) 100 (Hz) 120 (Hz)
MID 500 (Hz) 1.0K (Hz) 1.5K (Hz) 2.5K (Hz)
TREBLE 7.5K (Hz) 10.0K (Hz) 12.5K (Hz) 15.0K (Hz)
BASS −7 ~ +7
MID −7 ~ +7
TREBLE −7 ~ +7
Setting the Source Volume Level

10-EN
With the BASS ENGINE SQ function on this unit, several parameters
affecting Bass performance are adjusted simultaneously. The BASS
ENGINE SQ Level adjustment varies these parameters uniformly for
optimum Bass effect at different levels.
Setting BASS ENGINE SQ ON/OFF
Press and hold BASS for at least 2 seconds to switch the
sound mode.
BASS ENGIN MANUAL SET (Initial setting)
BASS ENGINE SQ On (BASS ENGIN):
Adjust the relavant Bass parameters uniformly by adjusting the
BASS ENGINE SQ Level (page 10).
BASS ENGINE SQ Off (MANUAL SET):
Adjust each audio effect setting separately.
Notes
• This operation can also be performed by selected BASS ENGIN in
Audio Setup mode. (Page 9)
• “ ” indicator lights up when BASS ENGINE SQ mode is ON.
Adjusting BASS ENGINE SQ Level
With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
uniformly effects various sound parameters for optimum Bass effect.
1 Press BASS to display the BASS ENGINE SQ Level
adjustment screen.
2 Turn the Rotary encoder to select the desired level
(0 ~ +6) (initial setting: +3), and then press ENTER.
Notes
• Adjustable only when DEFEAT is OFF.
• The Bass parameters affected contain EQ PRESETS, LOUDNESS and
3BAND EQ. These items are set uniformly in BASS ENGINE SQ mode
and cannot be adjusted separately.
• From Level 0 to Level 6, the effect of BASS ENGINE SQ increases level
by level.
• “ ” indicator displays the current BASS ENGINE SQ Level .
• If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
Displaying the Text
Text information, such as the folder name, the file name and the tag, etc.,
while playing MP3 files.
Press VIEW.
The display will change every time the button is pressed.
Note
• When the TEXTSCROLL is set to SCR MANUAL (refer to “Scroll
Setting (TEXTSCROLL)” on page 13), press and hold VIEW for at least
2 seconds, the current text will be scrolled one time.
The display in MP3 mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO. 
FOLDER NAME*1 FILE NAME*1 ARTIST NAME*2 
ALBUM NAME*2 SONG NAME*2 FILE NO./ELAPSED TIME
*1 If there is no text (Folder Name or File Name), “FOLDER”/
“FILE” is displayed.
*2 If an MP3 file contains ID3 tag information, the ID3 tag
information is displayed (e.g., song name, artist name, and
album name). All other tag data is ignored.
If there is no tag information, “ARTIST”/“ALBUM”/“SONG”
is displayed.
Notes
• Some characters may not be displayed correctly with this device,
depending on the character type.
• “NO SUPPORT” is displayed if text information is not supported by the
unit.
• The text or tag information may not be correctly displayed, depending
on the contents.
BASS ENGINE SQ Function
BASS /ENTER

Rotary encoder
Other Functions
SOURCE/
/ENTER/OPTION

VIEW
Rotary encoder