Alpine COOLER-445 User manual

CoolerAmplifiedBT
speakerSystem

COOLER‐445

IncludedAccessories:

DCCigaretteLighterAdapter(5m)

























































Connectthesuppliedpowercable
beforecontinuing

PowerON
PressthePowerButton(2)

PowerOFF
HoldthePowerbuttonfor5secondsand
release

AdjustingVolume
PressVolumeUp③toincreasethe
volume
PressVolumeDown①todecreasethe
volume


SourceSwitching
PressthePower(2)buttontoswitch
betweenBluetoothandAuxinput

OutputModes
Pressandholdbuttons(2)and(3)to
switchbetweenloudandsuperloud

OutputMode LEDON
Loud 3
SuperLoud 5

BatteryIndicator

ShowsthecurrentDCpowerstatus.

(!)TheLEDswillblinkRedwhenthe
connectedDCPowersupplyislow


BluetoothPairing

BluetoothisdiscoverablewhenPWD‐CB1
ispoweredON.

SearchforAlpinePWDCB1usinga
Bluetoothcompatibledevice.Once
connectionisestablished,theBluetooth
andIndicatorBarwillbeON

SourceBluetoothand
BatteryIndicator
LED
Color

Bluetooth
Pairing
mode
Blinking Blue
Bluetooth
Paired ON Blue
AuxInpu
t
 ON Green

SourceSwitching

PressthePower(2)buttontoswitch
betweenBluetoothandAuxinput.

(!)IfanAuxdeviceisconnected,the
sourcewillswitchtoAux.


























AudioandDCinputsarewaterproof
whenthecoverissecurelyclosed.

AudioInput(1)

Connectanaudiodeviceusinga3.5mm
stereoheadphoneadapter.

AudioOutput(2)

Usea3.5mmStereoM/Mplugtoconnect
twoPWD‐CB1together.

(!)Connectingheadphonewillcause
damagetohearingandmaydamagethe
amplifier

DCPowerIn(3)


Connectthesuppliedcigarettelighter
powercable.

(!)Caution:keepclearfromanyliquidsor
objects

ImportantSafetyInstructions

1. ReadInstructions–Allsafetyand
operationinstructionsshouldbe
readbeforetheproductisused
2. RetainInstructions–Thesafety
andoperatinginstructionsshould
beretainedforfuturereference
3. HeedWarnings‐Allwarningonthe
productandintheoperating
instructionsshouldbeadheredto.
4. Followsuppliedoperational
instructions.
5. Disconnectanypowersources
beforecleaning.
6. Cleanusingamixtureofdishsoap
andalightabrasivebrushonthe
cooler.
7. Donotuseapressurizedwater
sourcetoclean.
8. OnlyuseAlpinerecommended
accessories,failuretodosomay
causeinjury,ordamagetothe
product.
9. KeepthePWD‐CB1inawell
ventilatedareatoensurereliable
operationandtoprevent
overheating.
10. Placecooleronastablesurfaceto
avoidbodilyinjuryordamageto
thecooler.
11. Donotalterthepowercordinany
wayformorfashion.
12. Routethepowersupplycordsso
theywillnotbecompressed,
pinchedorbent.Securethecordif
necessary.
13. DonotoverloadanyoutletsorDC
suppliesasthiswillresultinan
increasedriskoffireand/or
electricshock.
14. Userecommendedratedfusesonly.


This equipment has been tested and found to comply
with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
changes or modifications not expressly approved by
the party responsible for compliance could
void the user's authority to operate the equipment.