Lynx GXR-LA10A User manual

USER MANUAL
V.18.06
Lynx Pro Audio S.L.
Valencia, Spain - www.lynxproaudio.com - [e-mail]
GXR-LA10A
GXR-D15A
GXR-D18A

Manufacturer
CE CERTIFICACTION, EUROPEAN PRODUCT
GXR-LA10A
LYNX Pro Audio S.L.
Calle uno - Pol. Ind. Picassent
E-46220 Picassent (Valencia)
This user guide is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2017. All rights reserved.
GXR-D15A
GXR-D18A

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
3
CONTENTS
- SAFETY PRECAUTIONS 4
- SYSTEM OVERVIEW
GXR-LA10A 5
GXR-D15A 6
GXR-D18A 7
BACK PANEL 8
CONNECTORS AND CONNECTIONS 9
CONNECTION EXAMPLES 10
- CONFIGURING THE DIGITAL SIGNAL PROCESSOR
FIR FILTERS 13
CONFIGURING THE DSP OPTIONS 13
CONFIGURATION PANEL 13
SELECT INPUT: DIGITAL OR ANALOGUE 14
SELECTAND RUN PRESET 14
- ONLINE CONTROL SYSTEM 15
- HARDWARE AND ACCESSORIES 16
- APPLICATION EXAMPLES 17
- HOW TO USE OF THE FLYING FRAME 19
- CERTIFICATIONS AND GUARANTEE 26

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
4
Before starting to use this device, please read this instruction manual carefully.
Keepthese instructionsin theplacewheretheequipmentwillbeusedandwitheasyaccesstothem.
- Electrical appliance.
The exclamation mark within a triangle identifi es the presence of electricity. Use the system carefully
without wet hands or feet. Avoid installing the speaker in wet or excesivelly humid places. Do not
place material that containsliquid on ornear the unit.Avoid dripping or splashing water or any liquid
overthe unit. Regularly check the condition of the cables and make sure these are not being walked
on or pinched. Connectthe speaker to bipolar, earthedmains.The mains plug mustbe connected to
the appropriate protection (fuseor breaker).Connection to any other type of mains could result in an
electricalshockand violatelocal electricalcodes.CAUTION:DONOTCONNECTORDISCONNECT
THE AC POWER CONNECTORS UNDER LOAD.
- Heavy equipment.
Apply back protection when using the system.Avoid loading and unloading at heights.
- Electrical shock risk.
The diagonal mark within a triangle identifi es the presence of dangerous voltage.
Do not open or handle the interior of the box. These parts are not to be adjusted by the user. For
maintenance and/or repair please go to an authorized service centre.In order to reduce the risk of
electricshock,disconnect fromAC beforeplugin orunpluggingAudiosignalcables.ReconnecttoAC
onlyif allsignalconnectionsaremadeandsecured.Nevermanipulatethegroundtype plugprovided.
TheAC mains plugs should always remain accessible for operation.
Unplug the loudspeaker during storms or when it’s being used for a long time.
- Hearing damage risk.
These systems can reproduce large quantities of sound pressure which can damage hearing. Take
precautions if you are going to be near them for extended amounts of time and do not get too close.
- Hanging – Flying.
Do not hang the cabinets from the handles or from any other part other than the designated hanging
point. When fl ying this system please observe the technical and “Rainbow” software data carefully.
Never exceed themaximum safe workingloads or ignoretheinstructionsincludedwithin this manual.
Use Only fl ying accessories provided by Lynx Pro Audio S.L.
Rigging must be always carried out by professionals.
- Delicate Material.
Please ensure no foreign object or water enters the speaker. Only clean the unit with dry cloths. Do
not use solvents.
-Overheating – Fire risk.
To reduce the risk of the speaker over heating, avoid direct contact with sunlight.Avoid placing the
unit close to heat inducing objects such as radiators. Do not cover the equipment in use and do not
block any ventilation openings. Do not put naked fl ame, such as lighted candles, close or on top
of the unit.
- Electromagnetic and interferente emissions.
Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile
phones, lap tops, magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)
EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.
-IMPORTANT NOTE.
This Equipment must be used in accordance with these instructions and by trained professional
personnel only. This equipment should not be used in places with extreme tropical climates. Don’t
expose this apparatus to extreme humidity and or temperature values.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
5
SYSTEM OVERVIEW
GXR-LA10A
Components
LF: 10”, 2” voice coil, Malt Cross
Cooling System Processing 48 KHz / 56 bit double precision DSP
with FIR fi lters
HF: 1.4” exit throat 3” voice coil
titanium diaphragm + waveguide Control User control interface with LCD
Frequency Range 60 Hz – 20 KHz (-10dB) Control Connections USB / Ethernet (OCS) optional
Frequency Response 68 Hz – 18 KHz (± 3dB) AC Power 90 – 264 V 50/60 Hz with PFC
Max. SPL 135 dB AC Connections 16A Neutrik powerCon TRUE1 with
looping output
Coverage 100º H x 10º V Finish Polyurea coating, black colour
Power 1400 W Class D with switching
power supply & PFC Material 15mm Premium birch plywood
LF Amplifi er 1 x 800 W Dimensions (H x W x D) 298 x 790 x 436 mm
HF Amplifi er 1 x 600 W Weight 31 Kg (68 lbs)

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
6
GXR-D15A
Components LF: 2 x 15” (4” voice coil)
Neodymiun magnet assembly
Processing 48 KHz / 56 bit double precision DSP
Control User control interface with LCD
Frequency Range 30 Hz – 140 Hz (-10dB) processed Control Connections USB / Ethernet (OCS) optional
Frequency Response 35 Hz – 125 Hz (± 3dB) processed AC Power 90 – 264 V 50/60 Hz with PFC
Max. SPL 134 dB AC Connections 16A Neutrik powerCon TRUE1 with
looping output
Coverage Omnidirectional Finish Polyurea coating, black colour
Power 2400 W Class D with switching
power supply & PFC Material 18mm Premium birch plywood
LF Amplifi er 2 x 1200 W Dimensions (H x W x D) 505 x 790 x 690 mm
Weight 63 Kg (139 lbs)

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
7
GXR-D18A
Components LF: 2 x 18” (4” voice coil)
Neodymiun magnet assembly
Processing 48 KHz / 56 bit double precision DSP
Control User control interface with LCD
Frequency Range 30 Hz – 120 Hz (-10dB) processed Control Connections USB / Ethernet (OCS) optional
Frequency Response 35 Hz – 100 Hz (± 3dB) processed AC Power 90 – 264 V 50/60 Hz with PFC
Max. SPL 134 dB AC Connections 16A Neutrik powerCon TRUE1 with
looping output
Coverage Omnidirectional Finish Polyurea coating, black colour
Power 2400 W Class D with switching
power supply & PFC Material 18mm Premium birch plywood
LF Amplifi er 2 x 1200 W Dimensions (H x W x D) 605 x 1100 x 750 mm
Weight 92 Kg (202 lbs)

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
8
GXR BACK PANEL
USB connection
LCD display
&
digital control
Signal
Input
Signal
Output * Ethernet
OPTIONAL
Main
Link
Main
input
This isthe back pannel of theGXR-LA10Atops, icluding the connectors and digital control display.
* Available when the user has requested the
cabinets to be supplied with the Ethernet
Module kit.
Both cabinets GXR-D15Aand GXR-D18Ahave the same rear pannel, including the connectors anddigitalcontroldisplay.
Main
Link
Main
input
Signal
Input
Signal
Output
* Ethernet
OPTIONAL
LCD display
&
digital control
USB connection

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
9
CONNECTORS AND CONNECTIONS
CAUTION: Do not connect
or disconnect the AC Power
connectors under load.
NAC3FX-W
NAC3MX-W
XLR AEREAL CONNECTORS
OUTPUTS
1.- EARTH
2.- LIVE (+)
3.- LIVE (-)
INPUTS
1.- EARTH
2.- LIVE (+)
3.- LIVE (-)
XLR SOCKET CONNECTORS
SOCKET POWERCON TRUE1

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
10
FLOWN CONNECTION EXAMPLE (mono channel)
Four tops GXR-LA10A + two subs GXR-D15A
Link
IN
Link
IN
Link
IN
IN
AC main
input
AC main
input
Signal
input
Link
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
11
STACKED CONNECTION EXAMPLE (mono channel)
Three tops GXR-LA10A + one sub GXR-D-15A
STACKED
AC main
input
AC main
input
Signal
input
IN
Link
IN
IN
OUT
IN
Link
IN
IN
OUT
OUT

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
12
CONNECTION EXAMPLE (mono channel)
Four tops GXR-LA10A + two subs GXR-D18A
AC main
input
AC main
input
Signal
input
Link
IN
Signal
input
Link
IN
Link
IN
Link
IN
Link
IN
IN
IN
OUT
IN
OUT
IN
OUT

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
13
FIR FILTERS
Finite Impulse Response (FIR) fi lters are used in the signal processing of the GXR-LA10A cabinet. FIR is a type of
digital fi lter with linear phase characteristics. This frees system designers from the constraints of phase anomalies
associated with analogue fi lters or their digital versions (IIR, Infi nite Impulse Response). When properly used, FIR
fi ltering can audibly improve a system’s impulse response and reduce crossover interference.
CONFIGURING THE CABINET DSP OPTIONS
From the buttons below the display on the cabinet’s back panel you are able to confi gure the Basic adjustment
functions of the internal DSP.
Please note that you must apply the desired confi guration in each one cabinet and requires electrical power to work.
Fig 1
CONFIGURATION PANEL
On the back panel you will see 3 buttons and an information screen, on which you can read the established
parameters and information such as amplifi cation module temperature, input signal level and name of the current
preset (Fig1). If changes are not made the display will automatically dim to save energy and avoid unnecessary
light in situations where light is not wanted. To re-activate the light simply press the OK button.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
14
SELECT THE INPUT: DIGITAL OR ANALOG
This selection is only available when the user has requested the cabinets to be supplied with the Digital input kit.
There are four input options:Analog / Digital L / Digital R / Digital L+R
To select the input mode just press the OK button (3) and the up button (1), both at the same time but pressing
the OK button fi rst. Then you can select one of the four options using the up button (1).
To confi rm your selection press OK (3) until the progress bar fi nishes.
The display will show an inverted D (digital) or an invertedA(analog) so you can always know if the input is digital
or analog.
23
1
Fig 2 Fig 3 Fig 4
SELECT AND RUN PRESET
To change the preset confi guration (see Fig 2) just press the up button (1) and down button (2) until you see the
title and present number required and once found press OK (3) until the progress bar fi nishes (Fig 3). The display
will indicate “Loading DSP” (Fig 4)
Note: In case of a power cut, the DSP will save its last confi guration when restarted.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
15
ONLINE CONTROL SYSTEM
Who is it for?
Users of Self powered DSP incorporated Lynx Pro Audio Cabinets where the user has requested the cabinets
be supplied with the Ethernet Module kit.
What is it for?
Obtain detailed information of cabinet behaviour and monitor the cabinet/s in real time. You can change the
preset, gain, mute, polarity and phase. You can also activate the air absorption compensation and select the
«SOLO» mode.
How does it work?
Via Ethernet (cable or wireless). Once installed, the O.C.S. software automatically detects all the cabinets
connected to the network and displays them in the O.C.S. window on the users PC.
What does it show?
AswellasdisplayingthecabinetmodelandIPaddresstheO.C.Swillbemonitoringinrealtimeandtheuserwillbe
able to viewRMS levels, Input clip, power module temperature, compression levels, air absorption compensation
and cabinet angulation.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
16
HARDWARE AND ACCESSORIES
The GXR cabinets off er a variety of practical accessories to help use the system in a number of events, from
touring applications to fi xed installations, indoor and outdoor. More accesorries are being added to the family,
as a practical transport dolly or some nylon covers.
BALL-PSR6
Ballpin with thread for
GXR-LA10Aand
GXR-D15Acabinets
FD-1GXRLA10ANL
FD-1GXRD15ANL
FD-1GXRD18ANL
Rain cover for the
back panel of the GXR
cabinets
SV-GXRLA10A
Flying frame designed for
rigging the GXR cabinets
FC-GXRLA10A
Flight case

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
17
FOR A MULTITUDE OF APPLICATIONS

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
18
FOR A MULTITUDE OF APPLICATIONS

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
19
HOW TO USE THE FLYING FRAME SV-GXR
The fl ying system SV-GXR is constructed with steel and is composed by the fl ying frame and a special upper
support piece. All the cabinets are hung from this fl ying frame, one beneath the other correspondingly.
Diff erent accessory pieces are available to fi t all your needs.
BALL-PINS
BALL-PINS
EXTERNAL UPPER PIECE
FLYING FRAME
TO FIT
TO FIT
TO FIT

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]
GXR
20
EXTERNAL UPPER PIECE
TO FIT
TO FIT
BALL-PINS
BALL-PINS
TO FIT
TO FIT
Note: Ensure all pins on all cabinets are inserted correctly and fully in their corresponding holes.
Place the shackles in position so that when the system is lifted it raises correctly and achieves maximum system
orientation. You have diff erent holes to place the shackles and orientate the system to your requeriments.
Fix the shackles to the elevation system (e.g motors, lifts) and elevate enough so as to fi x the SV-GXR on to the
fi rst cabinet (GXR-LA10A or sub GXR-D15A) so that the link of support fi t in to position in the upper lateral fi xing
points of the cabinet.
Note: To hang the system with motors or hoists, use the shackles code nº GS-12.
The external upper support piece is used to fi x the shackels to the fl ying frame. This piece has three holes and
must be placed into the transversal part of the frame. Its position is adjustable and locked by steel pins.