Altec Lansing POWER DUO ABT385 User manual

ITEM NO.: ABT385 Quick Start Guide

WHAT’S INCLUDED
1.
Remote Control
Quick Start Guide
ABT385
Power Duo Bluetooth Tower Speakers
Satellite Speaker Main Speaker
ITEMNO.: ABT385 QuickStart Guide
LIGHTS

ASSEMBLY
2.
Satellite Speaker
Output Port
Light Port
Main Speaker
Main Speaker
(rear view)
Main Speaker
(rear view)
Power Cable
Connect the satellite speaker to the main speaker.
The cable attached to your satellite speaker has two plugs. These plugs
connect to the output port and the light port on the main speaker.
Once your speakers are connected properly, you can insert
the power cable on your main speaker into an available power
outlet in your home.

AUDIO INPUT
3.
ARC: HDMI Audio Return
Channel Input from a TV
OPTICAL: Optical Digital Audio Input
from a TV, DVD Player, CD Player. etc.
SRC 1: For line level or headphone
output from audio sources
SRC 2: For line level or headphone
output from audio sources
Plug external audio devices into the various ports on on the main speaker.

USING THE REMOTE
4.
Power ON/
Power OFF (Standby)
LIGHTS
(Press repeatedly to
toggle through
the various
light settings)
BT ARC OPT
(Choose to play
Bluetooth audio,
or from devices
connected to the
ARC or OPT ports.)
SRC 1
(Choose to play
audio
from devices
connected to the
SRC1 port.)
SRC 2
(Choose to play
audio
from devices
connected to the
SRC2 port.)
MUTE
Decrease Volume
Next TrackLast Track
Play/Pause
LIGHTS
SRC1 SRC2
TONE
BT ARC OPT
MUTE
VOL +
VOL -
TONE
(Press repeatedly to toggle between
the Bass or Treble setting options.
Use the Vol + and Vol - to increase or
decrease the selected setting. )

FRONT CONTROL PANEL
SIDE CONTROL PANEL
SPEAKER CONTROLS
5.
T
O
N
E
V
O
L
U
M
E
+
V
O
L
U
M
E
–
/
S
O
U
R
C
E
/
Power/Play/Pause
Select Source
(BT, ARC, OPT, SRC1 or SRC 2.
Press & hold to disconnect
Bluetooth connection)
Increase Volume
Decrease Volume
Microphones (not
included) can be
plugged into the Mic1
and Mic2 input jacks so
that you can sing along
while your favorite songs
are playing.
Rotate the ECHO knob to
add more vocal eect to
your voice.
Rotate the Mic1 and
Mic2 volume knobs to
increase or lower the
volume on each
microphone.

BLUETOOTH PAIRING
6.
ABT385
LIGHTS
SRC1 SRC2
TONE
BT ARC OPT
MUTE
VOL +
VOL -
Press the Power ON
button on your remote
control to power on
your speakers.
LIGHTS
SRC1 SRC2
TONE
BT ARC OPT
MUTE
VOL +
VOL -
Press the BT button on
your remote control to
enter Bluetooth mode.
Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth
is turned on. Connect to the device listed as “ABT385.”

SPEAKER PLACEMENT
7.
For best results you should place one speaker directly to the left of a TV or
computer monitor, and the other speaker placed directly to the right of a TV
or computer monitor (see below).

SAFETY PRECAUTIONS
8.

FCC STATEMENT
9.
SPECIFICATIONS
10.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Power Audio: 120W (RMS) 2.0 Channel
240 W (PMPO) Total
Driver Units:5.25”*4+2.25”*4
Frequency Response: Satellite:120Hz-20KHz
Subwoofer: 20Hz-170Hz
Separation:≥40dB
S/N:≥70dB
Distortion:≤0.5%（1K,1W)
Power Supply:~120V/60HZ
Dimensions: Subwoofer: W172xH830xD343(mm)
Satellite: W172xH830xD343(mm)