Altinex MX2426CV User manual

SWITCHERS
MANUAL PART NUMBER: 400-0027-003
PRODUCT REVISION: 1
MX2426CV
COURT PC VIEW TRIAL
PRESENTATION SWITCHER
USER’S GUIDE

SWITCHERS
1
INTRODUCTION
Thank you for purchasing the MX2426CV Court-
PC-View Trial Presentation Switcher. We are sure
you will find it reliable and simple to use.
Superior performance for the right price, backed by
solid technical and customer support is what
Altinex has to offer.
The product you are holding in your hands is
designed using state-of-the-art technology and is
superior to anything available on the market. You
will find this and our other products reliable, long
lasting, and simple to operate.
We are committed to providing our customers with
signal management solutions to the most
demanding audio-visual installations at very
competitive pricing.
We appreciate your selection of our products and
are confident that you will join the ranks of our
many satisfied customers throughout the world.
This manual covers:
MX2426CV Court-PC-View Trial Presentation
Switcher
TABLE OF CONTENTS
Page
PRECAUTIONS / SAFETY WARNINGS ...............2
GENERAL..........................................................2
RACK MOUNT SAFETY GUIDELINES..............2
INSTALLATION..................................................2
CLEANING.........................................................2
FCC / CE NOTICE .............................................2
ABOUT YOUR SWITCHER...................................3
TECHNICAL SPECIFICATION..............................3
DESCRIPTION OF MX2426CV.............................4
INPUTS/OUTPUTS............................................5
COMPUTER INPUTS.........................................5
DISPLAY OUTPUTS..........................................5
JUDGE OVERRIDE (BLACK OUT) BUTTON.....5
MONITOR STATUS DISPLAY ...........................5
POWER .............................................................5
APPLICATION DIAGRAM .....................................6
INSTALLING YOUR SWITCHER ..........................6
OPERATION .........................................................6
FRONT PANEL CONTROL................................6
MASTER SLAVE DISABLE CONTROL..............6
RS-232 CONTROL.............................................7
RS-232 PROTOCOL..........................................7
FREQUENTLY ASKED QUESTIONS....................8
CABLES AND ACCESSORIES .............................9
TROUBLESHOOTING GUIDE ..............................9
ALTINEX POLICY ...............................................10
LIMITED WARRANTY......................................10
RETURN POLICY ............................................10
CONTACT INFORMATION ..............................10

SWITCHERS
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MX2426CV Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MX2426CV and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
•Unauthorized personnel shall not open the unit
since there are high-voltage components
inside.
•Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2. SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE MX2426CV
•Maximum operating ambient temperature is 35
(degrees C).
•Never restrict the airflow through the devices’
fan or vents.
•When installing equipment into a rack,
distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
•Connect the unit to a properly rated supply
circuit.
•Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3 INSTALLATION
•For best results, place the MX2426CV Switcher
on a flat, level surface in a dry area away from
dust and moisture.
•To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
MX2426CV Switcher in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
•Handle the MX2426CV Switcher carefully.
Dropping or jarring can damage internal
components.
•Do not place heavy objects on top of the
MX2426CV. If the MX2426CV is to be mounted
to a table or wall, use only Altinex made
DA1292FC 1U High Rack Mount and cables for
optimum setup.
•To turn off the main power, be sure to remove
the cord from the power outlet. The power
outlet socket should be installed as close to the
equipment as possible, and should be easily
accessible.
•Do not pull the power cord or any cable that is
attached to the MX2426CV Switcher.
•If the MX2426CV Switcher is not used for an
extended period, disconnect the power cord
from the power outlet.
1.4 CLEANING
•Unplug the MX2426CV power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents, such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
•This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.

SWITCHERS
3
•Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
ABOUT YOUR MX2426CV SWITCHER 2
Designed for courtroom applications, the
MX2426CV Court PC View Trial Presentation
Switcher handles the specific switching,
distribution, and control needs of a typical trial
presentation system. The MX2426CV Switcher
offers two VGA (VGA/SVGA/XGA) inputs – each
with buffered local monitor outputs – and six VGA
main outputs to transmit signals to monitors and/or
projectors throughout a courtroom. The inputs are
typically used for displaying to each other’s team
as well as to the various other participants in a trial
including the Judge, the Witness, the Jury, and the
Media.
The front panel of the MX2426CV allows a user to
select which input will be displayed and which of
the outputs will be turned ON or OFF. There are
also four memory settings that can store
configurations and recall them at the touch of a
button. These features make the MX2426CV
Switcher ideal for a courtroom environment in
which evidence may need to be previewed before
being displayed to the jury or to a witness. The
MX2426CV may also be controlled through RS-
232, allowing it to be switched by a computer or
other third-party control system.
An optional accessory, the Judge Override Button
(part # RC5206CV), is currently usable with the
RC5251IR. The Judge Override Button allows the
Judge to immediately black-out all of the displays in
the system to avoid displaying inadmissible
evidence. The Monitor Status Display provides a
manner of quickly determining which displays in a
system are active, as the face of the displays may
not always be visible.
The MX2426CV handles the requirements of a
standard trial computer presentation system. For
advanced systems, using the MX2426CV Switcher
together with other Altinex products may expand its
capabilities.
The MX2426CV offers an extremely low-profile
design to reduce visual obstruction in the
courtroom when installed as a desktop unit. It may
also be rack-mounted using optional hardware.
TECHNICAL SPECIFICATION 3
FEATURES/DESCRIPTION MX2426CV
GENERAL
No. of Inputs Two
Input Connector 15-pin HD Female
No. of Outputs Two Local Monitor +
Six Main Outputs
Local Monitor Output
Connector 15-pin HD Female
Main Output Connector 15-pin HD Female
Compatibility VGA, SVGA, XGA,
RGBHV, RGBS,
RGsB, Component
Video (Y, R-Y, B-Y), S-
Video (Y/C) and
Composite Video
Table 1. MX2426CV General
MECHANICAL MX2426CV
Height (inches) 17.00in (432mm)
Width (inches) 1.75in (44mm)
Depth (inches) 9.00in (229mm)
Weight (pounds) 4.8lbs. (2.18kg)
Ship Weight (pounds) 7.0lbs. (3.18kg)
Material 0.1” Al
Finish Gray
Front/Back Panels Lexan
T°Operating 10°C-35°C
T°Maximum 50°C
Humidity 90%non-condensing
MTBF (calculations) 40,000hrs (min.)
Table 2. MX2426CV Mechanical
ELECTRICAL MX2426CV
Input Video Signal
Analog Signal -1.5V to +1.5V
(+/-1.5V p-p max)
Impedance 75 Ohms
Input Sync Signal
Composite Sync TTL(+/-)
Sync on Green -0.3V
Impedance 10 k Ohms
Output Video Signals
Analog Signal -1.5V to +1.5V
(+/-1.5V p-p max)

SWITCHERS
4
Rise/Fall Time (ns) 2.4
Impedance 75 Ohms
Output Sync Signals
Composite Sync TTL(+/-)
Sync on Green -0.3V
Impedance 22 Ohms
Frequency Compatibility
Horizontal 15-200 kHz
Vertical 30-190 Hz
Minimum Video Bandwidth 175 MHz @ -3 dB
Typical Video Bandwidth 200 MHz @ -3 dB
Cross-talk -48 dB @ 10 MHz
Coupling DC
Power 90-140V/200-240V
Selectable
Power Consumption 12 watts max
Table 3. MX2426CV Electrical
MX2426CV DESCRIPTION 4

SWITCHERS
5
4.1 INPUTS/OUTPUTS
All inputs and outputs of the MX2426CV use 15
pin HD female connectors. This allows easy
installation of the system
with PC computers and
VGA type monitors.
4.2 COMPUTER INPUTS
The MX2426CV offers two computer inputs with
buffered local monitor outputs. One input is for
the Plaintiff/Prosecution team and the other is for
the Defendant’s team. The trial presentation
system of either party can be connected to the
MX2426CV and either one can be selected for
presentation on the system.
4.3 DISPLAY OUTPUTS
The MX2426CV Switcher offers six outputs that
distribute signals to the judge, attorneys for each
side, the witness, the jury and the media. All
outputs are amplified and can drive a signal
through up to 100 feet of coaxial cable with
minimal signal degradation. It is important to
recognize that the type of coaxial cabling used
may increase or decrease this distance. Altinex
offers various lengths of high performance VGA
type cables with various gender connectors. Use
of these cables will insure a high quality image.
4.6 JUDGE OVERRIDE (BLACKOUT) BUTTON
In a courtroom environment, it is often critical to
prevent an inadvertent display of the video
information to the participants of the trial. A show
of evidence to the jury against specific ruling of
the court may, in some cases, result in a mistrial.
To address this situation Altinex offers a Judge
Override (Blackout Button) as an optional
accessory. This device is designed to allow a
judge to instantly turn OFF all video signals being
displayed.
4.7 MONITOR STATUS DISPLAY
During a trial, it is important for various
participants to have an instant knowledge of
which displays are ON. To address this need,
Altinex offers Output Status Display as an
optional accessory to the MX2426CV. The
Output Status Display is connected to the status
output port of the MX2426CV and has ON/OFF
indicator lights for each of the outputs of the
switcher. The status port can support up to 6
Output Status Displays interconnected in a daisy-
chain fashion. The Output Status Display
requires an external power adapter.
4.8 POWER
The MX2426CV has an internal power supply
capable of accepting either 110V or 220V
through a selection switch. This makes the
product compatible with any power standard in
the world. Power cords for England, Germany,
and Australia are optionally available with the
product.

SWITCHERS
6
APPLICATION DIAGRAM 5
INSTALLATION 6
Step 1. Make sure that the power input is set to
the proper AC voltage for your country.
An incorrect setting can result in unit
damage not covered by warranty.
Step 2. Connect the power cord to the unit and
plug it into the power outlet.
Step 3. Connect the cables from the video
sources (computers) to the input
channels, local monitors to the loop
outputs and connect the output channels
to the display devices (monitors or
projectors. A Shielded, high, quality
coaxial cable is recommended for video
cable runs.
Step 4. Verify that the display and audio
equipment operates properly and results
in perfect images and sound.
CONGRATULATIONS! YOU ARE DONE.
OPERATION 7
7.1 FRONT PANEL CONTROL
The front panel of the MX2426CV offers controls
that are specifically designed for a courtroom
environment. The SOURCE SELECT buttons
allow a user to select between the presentation
systems of the plaintiff or the defendant. The
DISPLAY SELECT section of the switcher allows
a user to turn ON or OFF, display devices
connected to the respective ports. The
RECALL/SAVE section of the control panel
allows a user to store various presets in memory
and recall them at the push of a button. To save
a preset select the outputs to be controlled by
one button and store the preset in any one of four
memories by holding the memory button for 2
seconds. To recall just press the memory button.
7.2 MASTER DISABLE CONTROL
The MX2426CV is also equipped with a master
disable control that allows disabling of the unit.
This port is used to connect the Judge Override
button. See the description below. The
connection is accomplished by connecting one
wire to the OFF pin and the other to the GND pin.
When the OFF pin is shorted to ground, all video
signals are terminated. INPUT SELECT
SECTION
If you experience any problems, please call
1-800-258-4623 or 1-714-990-2300 for
international calls.

SWITCHERS
7
7.3 RS-232 CONTROL
A computer through RS-232 port can remotely
control the MX2426CV. A terminal block
connector is used to
make interconnection in
the field easy. The RS-
232 commands are
written using ASCII
character format. This makes it simple to
program and control the MX2426CV.
The terminal block is labeled with the proper
contact designations: Transmit (TX), Receive
(RX), and Ground (GND). Always remember that
the Transmit pin from the control system or
computer must be connected to the Receive pin
on the switcher control port; do not connect
Transmit to Transmit or Receive to Receive.
Typically, a control system or computer will offer
an RS-232 connection on a 9-pin D connector.
The following are two typical cable pin-out
designations for RS-232 connections. Always
confirm the pin-outs for your system to insure
proper wiring.
IBM PIN No. MX2426CV Contact
3RX
2TX
7GND
Connection IBM-PC 25-pin D to MX2426CV
Terminal Block
IBM PIN No. MX2426CV Contact
2TX
3RX
5GND
Connection IBM-PC 9-pin D to MX2426CV
Terminal Block
Port setting preferences for the control system or
computer being used to control the switcher
should be set as follows:
BAUD Rate (Bits per second): 2400
Data Bits: 8
Parity: None
Stop Bits 1
There is no software or hardware flow control
implemented. The RS-232 input has a 6-
character buffer and will not execute additional
commands until the previous command is fully
processed.
7.4 RS-232 PROTOCOL:
Standard RS-232 is used to control the switcher.
Control can be accomplished either through a
computer or through a control system.
RS-232 Protocol:
[AOFF] All channels off. Turns all monitor
outputs off. This command does not
affect source selection.
[RSET] Resets the unit to the POWER ON
condition. During POWER ON all
monitors are turned OFF. This is done
to preclude accidental monitor
connection during the power glitch.
[FSET] This command initializes the unit to
the factory condition. All memories are
reset. Do not use this command
unless it is absolutely necessary.
[INP0] Turns all input sources to the OFF
position. After executing this
command input 1 and input 2 are
disconnected from the outputs.
[INP1] Select input 1. This is the Plaintiff
side.
[INP2] Select input 2. This is the Defendant
side.

SWITCHERS
8
[MONbk] Turns selected outputs in the ON or
OFF position
b = monitor number
k = ON/OFF control.
1 = monitor is in the ON position
0 = monitor is in the OFF position
Monitor number counts from left to
right. 1 - Judge, 2 - Plaintiff,
3 - Defendant, 4 - Witness, 5 - Jury,
and 6-Media.
An example of the command would be
[MON11] – turns Judge’s monitor in
the ON position. [MON60] – turn
Media output in the OFF position.
[RCLn] Recall status memory location
n = 1, 2, 3, 4
[SAVn] Save status memory location
n = 1, 2, 3, 4
Commands must be issued as shown, in ALL
CAPS and with brackets [ ] included in the
command string.
After processing a valid command, an [OK] string
will be returned, followed by a command echo.
For instance, a command of [INP1] will have [OK]
as a return string.
If a command is not recognized, an error string,
[ERR], will be returned.
When a key is pressed on the front panel, a
feedback string is transmitted. This is done to
inform a control system that the key has been
pressed. (This feature allows several switchers to
be grouped together to operate in tandem).
FREQUENTLY ASKED QUESTIONS 8
No Question Answer
1How do I
know which
monitors are
ON if I am
not next to
the switcher?
We have an optional
accessory, the Monitor Status
Display (part # RC5206CV),
which is currently available for
the MX2426CV. The Monitor
Status Display provides a
manner of quickly determining
which displays in a system
are active, as the face of the
displays may not always be
visible.
2How do I
shut down all
monitors at
once?
We also have currently
available, the Judge Override
Button (part# RC5205CV).
The Judge Override Button
allows the Judge to
immediately black out all of
the displays in the system to
avoid displaying inadmissible
evidence.
3Are there
differences
between the
Plaintiff and
Defendant
inputs?
No, the MX2426CV offers two
of the same VGA inputs –
each with buffered local
monitor outputs.
4Can I use
this product
in non-court
applications?
Yes, you can use the
MX2426CV in non-court
applications. This product
consists of a 2-in 1-out
switcher and a 1-in 6-out
distribution amplifier. All
inputs and all outputs are the
same.
5Can I do
presets for
different
monitors to
be ON for
each preset?
Yes, the MX2426CV has four
memory settings that can
store configurations and
recall them at a touch of a
button.
6Can I control
the
MX2426CV
from my PC?
Yes, we have available
software in optional
accessories.

SWITCHERS
9
7Can power
input be
configured
for 220V?
The MX2426CV has an
internal power supply capable
of accepting either 110V or
220V through the selection
switch, changing the location
of the fuse box.
8May I rack
mount this
unit?
Yes, if desired, you may order
Rack Ears for single unit
(part#DA1292FC) from
optional accessories.
CABLES AND ACCESSORIES 9
Model No. Description
RACK MOUNTING ACCESSORIES
DA1292FC 1U Rack mount ears for single unit.
POWER CABLES
PC5301US Power cable for US
PC5302UK Power cable for England
PC5303AU Power cable for Australia
PC5304GR Power cable for Germany
RC5205CV Judge Override Button (with 50 feet
cable)
RC5206CV Monitor Status Display
MALE TO MALE VGA CABLE
CB3703MR 3 feet
CB3706MR 6 feet
CB3712MR 12 feet
CB3725MR 25 feet
CB3750MR 50 feet
CB3775MR 75 feet
CB37100MR 100 feet
CB37150MR 150 feet
FEMALE TO FEMALE VGA CABLE
CB3803HR 3 feet
CB3806HR 6 feet
CB3812HR 12 feet
CB3825HR 25 feet
CB3850HR 50 feet
CB3875HR 75 feet
CB38100HR 100 feet
CB38150HR 150 feet
MALE TO FEMALE VGA CABLE
CB3903HR 3 feet
CB3906HR 6 feet
CB3912HR 12 feet
CB3925HR 25 feet
CB3950HR 50 feet
CB3975HR 75 feet
CB39100HR 100 feet
CB39150HR 150 feet
VGA TO RGB ADAPTER CABLES
MS8102CA 15-pin HD Male to 5 BNC Male, 6 feet
MS8104CA 15-pin HD Male to 5 BNC Male, 12
feet
MS8105CA 15-pin HD Male to 5 BNC Male, 50
feet
MS8106CA 15-pin HD Male to 5 BNC Female, 6
feet
GENDER CHANGERS
MS8144MG 15-pin HD/VGA Male to Male
MS8145MG 15-pin HD/VGA Female to Female
TROUBLESHOOTING GUIDE 10
•Please make sure that the input signal formats
are the same for the input (source) and the
output (display).
•Please make sure that the input signal
amplitude levels are as follows:
1. RED, GREEN, and BLUE are less than
1.5 V
2. HSYNC & VSYNC are less than 5.0 V
•Please use the appropriate the input voltage:
110 VAC or 220 VAC.
•Make sure that the cable is made according to
the manual, where RX pin of the MX2426CV is
connected to TX pin of the computer.
•If controlling the unit by RS-232 command,
make sure there is minimum delay of 100
millisecond before sending the next command.
•If you do not see picture on the screen make
sure you have selected both sources (Plaintiff
or Defendant) and one out of six displays.
•Please make sure that the proper quality of
cables is used. We recommended Altinex
made cables for the best results.
•If a problem arises after continuous usage at
higher voltage, higher temperature, higher
humidity, or at other extreme environmental
conditions, please correct the problem.

SWITCHERS
10
ALTINEX POLICY 11
11.1 LIMITED WARRANTY
Altinex warrants that its products and cables are
free from defects in materials under normal use
and service. This warranty is limited to repairing
at company’s factory any part or parts of the
product that which upon company’s examination
shall disclose to be thus defective. Products
considered defective should be returned to
company with transportation charges pre-paid,
within 2 years (90 days for cables) from date of
shipment to the purchaser. The warranty is
expressly instead of all other warranties
expressed or implied. Altinex neither assumes
nor authorizes any other person to assume for it
any other liability concerning the sale of the
products. This warranty shall not apply to any
product that shall have been repaired or altered
outside of company’s factory in any way so as, in
its judgment, to affect its stability or reliability, or
that has been subject to misuse, negligence or
accident.
11.2 RETURN POLICY
It is very important to Altinex that you receive the
products that you have ordered and that this
product meets your expectations. In the unlikely
event, that an Altinex product needs to be
returned please follow the policies below:
Altinex will accept product returns for a period of
30 days from authorized Altinex dealers.
Products must be returned in an unopened
package.
If a product has been opened, the restocking
fees will apply. For the restocking fee amount,
please contact an Altinex Sales Representative.
If the product is in your possession for more than
30 days, the restocking fees will apply.
Altinex will not accept any returns on cables or
custom products.
If your product is in warranty and needs service,
contact the Altinex Sales Department for an RMA
(Return Material Authorization). Products
returned without an RMA number may
experience a delay in service.
If your product is out of warranty and needs
service, contact the Altinex Sales Department for
an RMA (Return Material Authorization). Products
returned without an RMA number may
experience a delay in service. The service
charges will be quoted to you before the actual
repairs are done.
11.3 CONTACT INFORMATION
Sales Department
Phone: [phone]
Fax: [phone]
Accounting Department
Phone: [phone]
Fax: [phone]