SPECIFICATIONS FOR ACL2
AUDIO INPUT
Connectors XLR and 1/4” TRS (Pin 2 and Tip hot)
Type Electronically balanced/unbalanced
Impedance Balanced >50Kohm, Unbalanced>25Kohm
Max input level >+24dBu balanced and unbalanced
CMRR Typically>50dB at 1KHz
AUDIO OUTPUT
Connectors XLR and 1/4” TRS (Pin 2 and Tip hot)
Type Electronically balanced/unbalanced
Impedance Balanced 120ohm, Unbalanced>60ohm
Max output level >+21dBu,+20dBm balanced and unbalanced
SYSTEM SPECIFICATIONS
Bandwidth 22HZ to 22KHz, +0/-0.5dB
Frequency Response 10Hz to 30kHz,+0/-3dB
Noise >-90dBrA, unweighted, 22Hz to 22kHz
THD <0.008% Typical at +4dBu, 1kHz, unity gain
<0.04% Typical at +20dBu, 1kHz, unity gain
IMD <0.1% Typical SMPTE
Crosstalk <-100dB, 22Hz to 22Khz
Stereo Coupling True RMS detection
COMPRESSOR SECTION
Type Interactive Compressor (Interactive Knee Adaptation)
Threshold variable (-40dB to +20dB)
Ratio variable (1 to LIM)
Manual Attack Time variable 0.1ms to 200ms / 20dB
Manual Release Time variable from 50 ms to 4s / 20dB
Auto Attack Time Typical 15ms at 10dB, 5ms at 20dB, 3ms at 30dB
Auto Release Time Program dependent, typical 125dB/s
Output level variable (-20dB to +20dB)
INDICATORS
GAIN REDUCTION 12 element LED display:
1/2/4/6/9/12/15/18/21/24/27/30 dB.
IN/OUT 1 LED for indication of IN/OUT.
AUTO LED indicator for each
