ALZA SwitchBot Indoor Cam User manual

Indoor Cam
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch •Manuel de l'utilisateur

2
English
3 –13
Čeština
14 –24
Slovenčina
25 –35
Magyar
36 –47
Deutsch
Français
48 –58
59 –69

3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Package Contents
Specifications
Product Name:
SwitchBot Indoor Cam
Power Input:
5V 1A
Video Resolution:
1080P HD
Image Compression:
H.264
Micro SD Card:
Up to 128GB, FAT 32 format
Operating Temperature:
-15°C to 45°C (5°F to 113°F)
Relative Humidity:
<95%
Wireless Standard:
802.11b/g/n (2.4GHz)
Indoor Cam x 1
Base x 1
USB Adaptor x 1
Screw Pac x 1
Sticker x 2
User Manual x 1
Micro USB Cable (2m) x 1

5
Name of Parts
Front
Bottom
LED Indicator Light
Camera Lens
Mic
Base
Mounting Slot

6
Mounting Slot
Reset Button
Speaker
Micro USB Port
Screw Hole
Magnet (inside)
Base Cover
(removable)
Micro SD Card Slot
Back
Side

7
Install Indoor Cam
The indoor cam can be placed on table, wall, ceiling and other flat surfaces.
1. Place indoor cam without the base.
Place indoor cam directly on a table or shelf or stick it on a flat surface using the 3M
sticker.
2. Place indoor cam with the base.
Mount the base to the back or the bottom of indoor cam. The base can be attached to
an iron surface or a magnet.

8
You can also stick the base to a flat surface using the 3M sticker. After indoor cam is
properly installed, tilt to a desired angle.
The base can also be fixed with screws.

9
3. Connect the power cable.
Now the red light of the camera stays lit up. When the red light flashes quickly, this
indicates that the camera is waiting for network distribution. You can start using the
camera according to the steps from “Getting Started.”
Getting Started
•Download the SwitchBot app on App Store or Google Play Store.
•Create a SwitchBot account and sight in into the app.
•Place Indoor Cam close to the router. Connect the USB cable to the back of
Indoor Cam and to a 5V 1A USB adaptor. The plug it into a power outlet.
•On the app, tap the “+” icon on the top right of the Home page. Tap the “Inoor
Cam” icon and follow the instructions to compete the setup.

10
Precautions
•Scan the QR code to access the internet. Make sure that the screen of your phone
is brighter than the surrounding environment.
•Make sure the anti-rub function on Wi-Fi is turned off. If it on, this may lead to a
failure in connecting to the internet.
•Please make sure the camera is connected to 802.11 b/g/n (2.4GHz), IPV4
wireless network.
How to Reset
Press the reset button on the back for 5 seconds or until you can hear a prompt tone.
Status of LED Indicator Lamp
Status of Indoor Camera
Red
Stays lit up
Device starting
Red
Flashes rapidly
(0.25s/flash)
Pairing with network
Green
Flashes slowly (1.5 s/
flash)
Connecting with Wi-Fi router
Green
Flashes rapidly
(0.25s/flash)
Connected to Wi-Fi router and now
connecting to the internet.
Green
Stays lit up
Device is online
Red
+
Green
Flashes rapidly
alternately (0.25 s/
flash)
Connected to Wi-Fi router but failed to
connect to the internet
Red
+
Green
Flashes slowly
alternately (0.25 s/
flash)
Error in network connection

11
Safety Information
•This camera is for indoor use only.
•Keep the device away from water, fire, humid or hot environments.
•Unplug this device during lightening storms or when unused for long periods of
time.
•Do not attempt to disassemble, repair, or modify the device.
•Do not use damaged charger or USB cable to charge the device.
•Do not use any other chargers that those recommended.
•Do not use the device where wireless devices are not allowed.
•Adapter shall be installed near the equipment and shall be easily accessible.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

12
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Indoor Cam
Model / Type: SwitchBot
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 9.12.2021

13
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.

14
Uživatelská příručka k výrobku obsahuje funkce výrobku, návod k použití a postup
obsluhy. Přečtěte si pozorně uživatelskou příručku, abyste získali co nejlepší zkušenosti a
předešli zbytečným škodám. Tento návod si uschovejte pro budoucí použití. Máte-li
jakékoli dotazy nebo připomínky k zařízení, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆[phone]
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

15
Obsah balení
Specifikace
Název produktu:
Vnitřní kamera SwitchBot
Příkon:
5V 1A
Rozlišení videa:
1080P HD
Komprese obrazu:
H.264
Karta Micro SD:
Až 128 GB, formát FAT 32
Provozní teplota:
-15°C až 45°C (5°F až 113°F)
Relativní vlhkost:
<95%
Bezdrátový standard:
802.11b/g/n (2,4 GHz)
Vnitřní kamera x 1
Základna x 1
Adaptér USB x 1
Balení šroubů x 1
Nálepka x 2
Uživatelská příručka
x 1
Kabel Micro USB (2 m) x 1

16
Název dílů
Přední
strana
Spodní část
ILED ndikátor
Objektiv fotoaparátu
Mikrofon
Základna
Montážní drážka

17
Montážní drážka
Tlačítko Reset
Reproduktor
Port Micro USB
Otvor pro šroub
Magnet (uvnitř)
Kryt základny
(odnímatelný)
Slot pro kartu Micro SD
Zadní strana
Strana

18
Instalace vnitřní kamery
Vnitřní kameru lze umístit na stůl, stěnu, strop a jiné rovné plochy.
1. Umístěte vnitřní kameru bez podstavce.
Umístěte vnitřní kameru přímo na stůl nebo polici nebo ji nalepte na rovný povrch
pomocí samolepky 3M.
2. Umístěte vnitřní kameru na základnu.
Základnu připevněte na zadní nebo spodní stranu vnitřní kamery. Základnu lze připevnit
k železnému povrchu nebo magnetu.

19
Základnu můžete také přilepit na rovný povrch pomocí samolepky 3M. Po správné
instalaci vnitřní kamery ji naklopte do požadovaného úhlu.
Základnu lze upevnit také pomocí šroubů.

20
3. Připojte napájecí kabel.
Červené světlo kamery nyní zůstává rozsvícené. Když červené světlo rychle bliká,
znamená to, že kamera čeká na síťovou distribuci. Kameru můžete začít používat podle
pokynů z kapitoly "Začínáme".
Začínáme
•Stáhněte si aplikaci SwitchBot v App Store nebo Google Play Store.
•Vytvořte si účet SwitchBot a přihlaste se do aplikace.
•Umístěte vnitřní kameru do blízkosti směrovače. Připojte kabel USB k zadní
straně kamery a k adaptéru USB 5V 1A. Zapojte jej do elektrické zásuvky.
•V aplikaci klepněte na ikonu "+" vpravo nahoře na domovské stránce. Klepněte na
ikonu "Vnitřní kamery" a podle pokynů proveďte nastavení.