overwritten. Under video mode, short press on【Menu button】to ock the video fi e.
6
66
6）
））
）Parking monitor:
Parking monitor: Parking monitor:
Parking monitor: When the camera is off, if the ens detects any movement, the camera wi
begin recording automatica y. The video footage is then saved and ocked. If there is no
movement within a further 10 seconds, the camera wi stop recording.
7
77
7）
））
）Cycle recording:
Cycle recording: Cycle recording:
Cycle recording: The o dest video footage wi be overwritten by newer fi es. Cyc e recording
setup can be done from the video mode menu.
There are six options: Off /1 minute/2 minutes/ 3 minutes/5 minutes/10 minutes.
8) Audio recording while video is recorded:
8) Audio recording while video is recorded:8) Audio recording while video is recorded:
8) Audio recording while video is recorded: Audio on/off
9) Date and time setup:
9) Date and time setup: 9) Date and time setup:
9) Date and time setup: Under standby mode, short press on【Menu button】to enter system
setup menu, short press the 【Page up button】or【Page down button】to move the cursor to
date setup options. Short press the【Enter button】to enter menu setup.
Remarks: P ease make sure the correct date and time is set up so as to ensure va id video
footage as evidence in case of accident.
10
1010
10）
））
）USB mode:
USB mode: USB mode:
USB mode: Connects the camera to a PC via the USB cab e. Two modes wi be shown on
screen, USB and camera. Short press on【Page up button】or【Page down button】to se ect
USB option, then short press on【Enter button】to enter USB mode.
11
1111
11）
））
）Charging the batte
Charging the batteCharging the batte
Charging the battery:
ry: ry:
ry: P ug in the power cab e, and the red indicator ight wi be on, indicating
the battery is charging. The red ight dims as battery charges up. When fu y charged the red
ight wi turn off.
12
1212
12）
））
）Screen off delay:
Screen off delay: Screen off delay:
Screen off delay: The screen can be turned off automatica y. In the menu se ect “Screen off
timing”. There are four options are avai ab e: Off/3 minutes/5 minutes/10 minutes. For examp e,
“3 minutes” option wou d mean dash cam goes to power saving mode after dash cam is turned
on for 3 minutes and then screen is off. Defau t setting is “Off”.
