Amada AMFS02 User manual

Installation Instructions V1.0
AMFS02 AMFS03
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience on
Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)

• Check package contents against supplied parts and hardware list to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
require replacement parts, please contact amada customer service.
• Carefully read all instructions before attempting installation. If you do not understand the
instructions or have any concerns or questions, please contact customer service. Not all
parts and hardware included will be used.
• Using with caution because this product may contain moving parts.
• Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity.We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use. Thank you for your understanding.
IMPORTANT SAFETY INFORMATION
Tools Needed (Not lncluded)
Stud Finder Tape Measure Pencil Screwdriver
• Plastic anchor is self drilling, however if you are having difficulty installing, simply use a
1/8 drill bit to drill a pilot hole for the anchor.
• Additional mounting hardware may be necessary for mounting on surfaces such like
concrete or brick walls, this shelving package list is meant for drywall or wood studs
mounting only.
• For drywall mounting, use plastic anchors first and then drill insert screws.
• For wood stud mounting, plastic anchors are not necessary, do not use them.
WARNING:
These plastic anchors
are for drywall ONLY.
DO NOT use them in
concrete / brick / wood
studs wall.
CAUTION!
Supplied Parts
x12x12x6
Plastic
Anchor
4x30mm 13x40mm
Lag BoltsLag Bolts
4x50mm
x1
x6
x12
01
02
03
A B C
Short Screws
Metal Frame
11.42x5.91 in.
14.17x5.91 in.
16.54x5.91 in.
1

2
Two Different Assembly Unique Display Forms
01
02
03
Step 1A
Step 1B
Attach the floating shelf on top of the brackets.
Attch the floating shelf below of the brackets.
01
02
03
Drill two metal frames and one board together with four short screws.
Drill two metal frames and one board together with four short screws.

3
Before installation, please identify your wall type.
X
For wood stud wall, first of all, you should use
a stud finder(not included) to loacte wood
studs. Mark the edge and center locations.
Before drilling into the wall, you should prepare
some tools such as a level ruler to ensure that
these holes are in a horizontal line. Position the
metal frame with board at your desired height
and line up the holes with your stud center line.
Install the metal frame with borad using long
lag bolts [A]. Tighten all lag bolts with the
screwdriver(not included). If you feel a little
hard, you can also use the electric drill
machine only until the lag bolts [A] are pullled
firmly against the metal frames with board.
Step 2A For Wood Stud Wall
A
For wood stud wall installation, follow the step 2A.
For drywall installation, follow the step 2B.
For wood stud mounting,
plastic anchors are not
necessary.
WARNING:

4
Before drilling into the wall, you should prepare some tools such as a level ruler to
ensure that these holes are in a horizontal line. Position the metal frame with board at
your desired height and make sure the metal frame with board is level and flush to the
wall. Mark the holes for the plastic anchors[C].
Screws the plastic anchors[C] into the drywall and make sure that anchors become
flush with the wall.
Install the metal frames with boards using long lag bolts[B]. Tighten all lag bolts with
the screwdriver(not included). If you feel a little hard, you can also use the electric drill
machine only until the lag bolts[B] are pullled firmly against the metal frames with
board.
Step 2B For Drywall
C
B