Amart Furniture NARA 72813 User manual

Imported by Amart Furniture Pty Ltd, Brisbane , Qld Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
NARA BEDSIDE
ITEM CODE 72813
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 72813

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2ITEM CODE 72813
Allow 20 min For 1 person Additional tools required

3 ITEM CODE 72813

4ITEM CODE 72813
PARTS LIST
1
TOP BOARD
2
SIDE BOARD
3
SIDE BOARD
4
SHELF
5
BOTTOM BOARD
6
FEET
7
FEET
8
BASE BAR
9
BASE BAR
10
DRAWER SURFACE BOARD
11
DRAWER SIDE BOARD
12
DRAWER SIDE BOARD
13
DRAWER BOTTOM BOARD
14
DRAWER BACK BOARD
15
BACK BOARD

ITEM CODE 72813
5
O.
STEP:1
Insert the dowel(D) to side board (2)(3) and shelf (4).

ITEM CODE 72813
6
STEP:2
Fix runners (K) to side board (2) with screws(F).
Fix runners (M) to side board (3) with screws(F).
Note the position of fixing screw as shown in the figure.

ITEM CODE 72813
7
STEP:3
STEP:4
Fix cam pin (B) to side board (2)(3).
Attach side board(2)(3) to shelf (4) using cam locks(A)

ITEM CODE 72813
8
STEP:5
STEP:6
Fix cam pin (B) to top board (1).
Attach top board(1) to existing unit with cam locks(A).
Attach bottom board (5) to existing unit with screws(G).

ITEM CODE 728139
STEP:7
Attach back board (15) to existing unit with screws(H).

ITEM CODE 72813
10
STEP:8
STEP:9
Fix cam pin (C) to feet (6)(7).
Insert the dowel(D) to base bar (8)

ITEM CODE 72813
11
STEP:10
STEP:11
Fix base bar (8)(9) and feet (6)(7) with cam locks (A)
Attach base to existing unit with screws(G).

ITEM CODE 7281312
STEP:12
STEP:13
Fix cam pin (B) to drawer surface board(10).
Attach drawer side board (11)(12)to drawer surface board(10)
using cam locks(A)
Insert drawer bottom board(13) to the body of drawer.

ITEM CODE 72813
13
STEP:14
Attach drawer back board(14) to the body of drawer with screws(E)
Fix runners (L)(N) to drawer body with screws(F).
Note the position of fixing screw as shown in the figure.

ITEM CODE 72813
14
STEP:15
ASSEMBLY IS COMPLETE
Fix handles (I)to drawer surface board(10) with screw(J).
Assemble drawers into the body.

15 TEM ICODE 72813
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach
the Mounting Plate into a stud. If mounting into brick or masonry you will need to
acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture
and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2

16
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto your
furniture as sharp material may scrape and damage the finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
TEM ICODE 72813
NOTE: If the above care advise is not adhered to your product
warranty may become void