Amart Furniture 50299 User manual

1 50299
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
Clouds Dining Chair
ITEM CODE 50299
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084

2 50299
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2. Take care when lifting. Product should be assembled as near as possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads

3 50299
PARTS LIST
NO DESCRIPTION Qty
1 Chair back 1
2 Seat Frame 1
3 Leg 2
a. Bolt M8x45
4pcs
b. Bolt M6x60
4pcs
c. Flat Washer
(Φ8.5xΦ19)
4pcs
d. Lock Washer
(Φ8.5xΦ13)
4pcs
e. Flat Washer
(Φ6.5xΦ19)
4pcs
f. Lock Washer (Φ6.5xΦ9)
4pcs
g. Allen key M4
1pc

4 50299
ITEMS REQUIRED
 Attach chair back ( 1 ) to seat frame (2) using bolts (a), Flat Washers(c) and Lock
Washers(d).
 Tighten with Allen Key (h).
a.
Bolt M8x45
4pcs
c. Flat Washer
(Φ8.5xΦ19)
4pcs
d. Lock Washer
(Φ8.5xΦ13)
4pcs
g. Allen key M4
1pc

5 50299
ITEMS REQUIRED
 Attach leg (3) to seat frame (2) use bolt (b), flat washer (e) and lock washer (f).
 Tighten with Allen Key (g).
b. Bolt M6x60
2pcs
e. Flat Washer
(Φ6.5xΦ19)
2pcs
f. Lock Washer
(Φ6.5xΦ9)
2pcs
g. Allen key M4
1pc

6 50299
ASSEMBLY IS COMPLETE

Care and maintenance
• A multi-step finish is applied to all our furniture, but all wood comes from
nature. Because of this, there will be natural variations in surface texture
and grain like knots, mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make
each piece of furniture unique.
• Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come.
• Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
• Do not place hot objects on any furniture surface. Always use a hot plate or
placemat. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged without
proper care.
• Avoid exposing your furniture to strong sunlight, heat outlet, open windows
or dampness. Prolonged exposure to direct sunlight
can fade the finish of your furniture, while extreme temperature and
humidity changes can cause cracking or splitting.
• Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
• Do not allow plastic to come in direct contact with your furniture. Chemicals
in the plastic of placemats etc may soften and mark
the finish if left in contact with the furniture for a period of time.