Amart Furniture ERIN 61661 User manual

ЦУ
E
H
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
ITEM CODE 61661
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
61661 1/6 U5033B
ERIN ACCENT CHAIR

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when Product should be assembled as near as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instruco carefully before beginningassembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over  hten the screws and bolts as this may damage the threads
2/6
5 1
61661 U5033B
liing
.
ns
g

2pcs 395mm
2pcs 365mm
8pcs 8mm*h100mm
1pcs m8
8pcs 8*22
8pcs m8
61661 3/6 U5033B
PARTS LIST

STEP 1:Place legs②,③into posion as
STEP 2:Using the allenkey(B), insert bolt(A) and washers(C,D)
into the hole turning clockwise un 90% by hand.
61661 4/6 U5033B
shown
ghtened

STEP 3:Sit on the chair and when the chair is stable, turn
clockwise
ASSEMBLY IS COMPLETE
61661 5/6 U5033B
IMPORTANT NOTE:
Before finally the bolts, place the assembled chair
upright on a level surface and sit carefully on the chair to ensure
the chair legs are aligned and level. Then bolts ,once
g the base cover to the chair and your chair is ready
for use.
REMARK
The leveler can be adjustable.
unl fully ghtened.
ghten the
htened aach
ghtening

6/6
CARE AND MAINTENANCE
61661 U5033B
CHAIRS AND STOOLS
•Do not:
–Use chair/stool as a ladder
–Climb on the chair/stool
–Stand on the foot-rest of the chair, as this could lead to the stool becoming
unbalanced and overturning
–wash the cover with detergent containing bleach, chlorine, abrasive solvents or
alcohol-based products
–leave chair/stoolin direct or harsh sunlight
•Do
–Blot stains immediately with a clean white cloth. If necessary,wash gently with a
mild soap
–Steam cleaning may be used to restore the original texture
–Professional cleaning recommended for stubborn stains