Amart Furniture OSWALD 72057 User manual

Imported by Amart Furniture Pty Ltd,Qld,Brisbane
Australia.For any assistance with assembly or for missing parts
please phone Amart Furniture,Customer Service
Free Call 1800 351 084
1
Imported by Amart furniture Pty Ltd,Qld,Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart furniture ,Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
OSWALD CORNER LOUNGE
ITEM CODE 72057
72057

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean,level,spacious assembly area.Avoid hard surfaces that may
damage the product
2. Take care when lifting.Product be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly
5. Keep all hardware parts and packaging out of small children
6. Do not over tighten the screws and bolts as this may damage the threads
2 PEOPLE REQUIRED
ALLOW 5 MINUTES
2
!
WARNING
WARNING
DO NOT ALLOW CHILDREN TO PLAY ON THIS
MECHANISED FURNITURE OR ORERATE THE
MECHANISM.CHILDREN SHOULD ALWAYS BE
SUPERVISED WHEN USING THIS FURNITURE.
PLEASE KEEP YOUR BODY CLEAR OF THE
MECHANISM AT ALL TIMES
72057

PARTS LIST
3
A.1PC
Backrest
B.1PC
Backrest
C.1PC
Backrest
D.1PC
Backrest
E.1PC
Backrest
F.1PC
Seat
G.1PC
Sofa
H.1PC
Seat
I.1PC
Seat
J.1PC
Seat
K.5PCS
Leg
A
F
B
G
C
H
D
I
E
J
K
72057

STEP 1
472057
STEP 2
A
B
F
Install
Disassembly
Slide inside back receivers into the steel
mechanism posts in the base of the furniture. press both sides
of the inside back firmly into place. the inside
back automatically locks in place.
To remove the backrest, use a screwdriver to carefully
lever the tab on the backrest sleeve outwards. This will
unlock the backrest and allow you to lift it off the
mechanism posts.
Turn on the function switch and check whether all parts are
normally active.

572057
STEP 4
STEP 3
C
H
G
Slide inside back receivers into the steelmechanism posts in the
base of the furniture. press both sides of the inside back firmly
into place. the inside back automatically locks in place.
To remove the backrest, use a screwdriver to carefully
lever the tab on the backrest sleeve outwards. This will
unlock the backrest and allow you to lift it off the
mechanism posts.
Install
Disassembly
Place chair on flat surface to check and adjust legs to same
level without wobble. Tighten all bollts. Do not over tighten.

672057
STEP 6
STEP 5
D
I
E
J
K
Slide inside back receivers into the steelmechanism posts in the
base of the furniture. press both sides of the
inside back firmly into place. the inside back
automatically locks in place.
To remove the backrest, use a screwdriver to carefully
lever the tab on the backrest sleeve outwards. This will
unlock the backrest and allow you to lift it off the
mechanism posts.
Install
Disassembly
Slide inside back receivers into the steelmechanism posts in the
base of the furniture. press both sides of the inside back firmly
into place. the inside back automaticallylocksinplac.Then
tighten the chair legs (K).
To remove the backrest, use a screwdriver to carefully
lever the tab on the backrest sleeve outwards. This will
unlock the backrest and allow you to lift it off the
mechanism posts.
Install
Disassembly

STEP 7
7
ASSEMBLY IS COMPLETE
Do not drag sofa on any surface, must be lifted.
72057
Connect all the lounge pieces together using the
connection clips ensuring that each clip is
fully engaged.

Fabric Care and
Maintenance
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
CLEANING:
• Do not remove cushion covers for separate cleaning even though
they may have zippers
• Do not wash, Do not dry clean, Do not shampoo clean
• Clean with hot water extraction machine. Professional cleaning
recommended
• Do not use dishwashing liquid or laundry detergent
• Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the
fabric
• Apply proprietary cleaning agents strictly according to instructions to
remove the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not
use aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT
COVERED BY WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND
TEAR AND DOES NOT AFFECT THE DURABILITY OR
FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED
872057