Amart Furniture TIZONA 65974 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
TIZONA SQUARE LAMP TABLE
ITEM CODE 65974
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture, Customer Service Free call 1800 351
084
1ITEM CODE 65974

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 65974
ALLOW 20 MINITES 2 PEOPLE REQUIRED
TOOLS REQUIRED
12
11
10
9
8
765
4
3
2
1

3 ITEM CODE 65974
PARTS LIST
A. ALLEN KEY
1PC
B. BOLT M8X35MM
8PCS
1 GLASS
2 TOP FRAME
3 LEGS
4 BOTTOM FRAME
C. PAD 35X35MM
2PCS

ITEM CODE 659744
A. ALLEN KEY
1PC
B. BOLT M8X35MM
4PCS
1ITEMS REQUIRED
•Push bolt (B) into (4) of the bottom frame and secure
leg(3) with bolt(B).
•Tighten with allen key(A).

ITEM CODE 659745
A. ALLEN KEY
1PC
B. BOLT M8X35MM
4PCS
2ITEMS REQUIRED
•Put bolt (B) into (3)of the leg then join top frame (2)and
leg (3)
•Tighten with allen key(A)..

ITEM CODE 659746
3
•Lay the glass onto top frame(2), distribute the gaps
evenly around four sides.
•Adjust with plate (C ) if needed.

7ITEM CODE 65974
ASSEMBLY IS COMPLETE

8ITEM CODE 65974
PRODUCT CARE:
If the glass is chipped or broken, stop using the product and consult place
of purchase
WARNING:
• Do not place very hot or cold items on the glass surface unless adequately
thick table mats are used to prevent such items coming in contact with the
glass
• Do not sit or stand upon the glass surface
• Do not use the glass as a chopping surface
• Do not strike the glass with hard or pointed items
• When cleaning the glass panels use a damp cloth or leather with washing
up liquid or soft soap if necessary. Do not use washing powders or any
other substances containing abrasives since these may scratch the glass
Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come
• Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time
• Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlight can fade the
finish of your furniture, while extreme temperature and humidity changes
can cause cracking or splitting
• Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc. may soften and mark the
finish if left in contact with the furniture for a period of time