5. Troubleshooting
LED Action button error lights:
Flashing Red: The printer head is overheated. All printing will be suspended until the
printer cools down (usually takes about 5 minutes). The printer will resume working
automatically.
Solid Red: Paper error. Open the printer lid and make sure there is paper in the
printer. Check that the paper is loaded correctly, then close the lid.
Flashing Orange: The printer is attempting to connect to your Wi-Fi network. Your
printer can only connect to 2.4 GHz frequencies, not 5 GHz frequencies. To see if your
Wi-Fi network is configured correctly, double click the LED action button. A note will
print with the Wi-Fi connection status of your printer.
Solid Orange: Wi-Fi setup mode. Try using the Alexa app to manually connect your
printer to your Wi-Fi network. Open the Alexa app and log in with an existing Amazon
account, or create a new account. Tap the ‘More’ icon to add your printer.
Wi-Fi setup:
To return printer to Wi-Fi setup mode, press the LED action button (for about 5
seconds) until you hear four (4) buzzes . A note will print with instructions to follow.
Printer reset:
To reset printer to factory settings, remove the paper roll, press the LED action button
(for about 30 seconds) until you hear a double buzzer sound.
For additional help and troubleshooting, go to Help & Feedback in the Alexa app or
visit www.amazon.com/devicesupport.
©2021 Amazon.com, Inc. or its affiliates. Amazon, Day 1 Editions, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.
Amazon.com Services, Inc. 410 Terry Ave. North, Seattle, WA 98109 USA. Engineered by Amazon, assembled in China.
Important Product Information
01-26-45-6789
[47 CFR 15.21]
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are
not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information
on the product is on file with the FCC and can be found by inputting such Product's FCC ID (which can
be found on the device) into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid.
The output power of the radio technology used in the Products is below the radio frequency exposure
limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes
the potential for human contact during normal operation.
This device should be installed and operated with at least 20 cm between the radiator and your body.
The party responsible for FCC compliance is Amazon.com Services LLC 410 Terry Ave North, Seattle,
WA 98109 USA. If you wish to contact Amazon visit www.amazon.com/devicesupport, select United
States, click Help & Troubleshooting, then scroll to the bottom of the page and under the “Talk to an
Associate” option, click on Contact Us.
Device Name: Smart Sticky Note Printer
Model: G8TE6G
Using your Smart Sticky Note Printer around other electronic devices: The Smart Sticky Note
Printer generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance
with their instructions, may cause interference to radio communications and electronic equipment.
External RF signals may affect improperly installed or inadequately shielded electronic operating
systems, entertainment systems, and personal medical devices. While most modern electronic
equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal
medical devices (such as pacemakers and hearing aids), consult with your physician or the
manufacturer to determine if they are adequately shielded from external RF signals.
Recycling Your Device Properly: In some areas, the disposal of certain electronic devices is regulated.
Make sure you dispose of or recycle the device in accordance with your local laws and regulations. For
information about recycling the device, go to https://www.amazon.com/devicesupport.
Amazon Terms & Policies: Smart Sticky Note Printer is an Alexa-compatible accessory. Before using
this Smart Sticky Note Printer, please read all applicable terms, rules, policies and usage provisions
available at https://www.amazon.com/devicesupport (collectively, the “Agreements”). By using this
Smart Sticky Note Printer, you agree to be bound by the Agreements.
Limited Warranty: Your new or Certified Refurbished Smart Sticky Note Printer is covered by a 90
Day Limited Warranty. Details are available at www.amazon.com/devicesupport.
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all
cables without getting your hands wet and wait for the device and adapter to dry completely before
plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such
as microwave oven or a hair dryer. If the device or adapter appear damaged, discontinue use
immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric
shock, do not touch your device or any wires connected to your device during a lighting storm. Avoid
dropping the device. If the device is dropped, especially on a hard surface, and the user suspects
damage, do not attempt repair. Contact Amazon Customer Service for assistance at
https://www.amazon.com/devicesupport.com
Product Specification:
Model Number: G8TE6G
Electrical Rating: 12.0V 4.0 A
Temperature Rating: 32˚F to 95˚F (0˚C to 35˚C)
FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) This device may not cause harmful interference, and (ii.) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
