Amazon Echo VN94DQ User manual

User Manual
INSIDE THE BOX
Device
Power adaptor
Plug IN YOUR DEVICE
Plug the included power adapter into Echo and then into a power outlet. A blue light ring will begin
to spin around the top. In about a minute, the display will turn on and Alexa will greet you.
DOWNLOAD THE ALEXA APP
Download the free app to your phone or tablet. Start the download process in your mobile browser at:
http://alexa.amazon.com Opening the app will immediately start the setup process. During setup, you
will connect Echo to the Internet, so you will need your Wi-Fi password.
ECHO KNIGHT DISPLAY
Your Echo Knight will automatically wake up when you walk in the room or interact with Alexa, and
knows when to turn off to conserve power when you’re done.
GETTING TO KNOW YOUR ECHO KNIGHT
Microphone/Camera off button
Press this button to turn off the microphones and the camera. The LED indicator will turn red. Press the
button again to turn the microphones and the camera back on.
Volume up and down buttons
Turn up the volume by pressing the + button. Turn down the volume by pressing the - button
To learn more about Echo Knight, go to “Help” in the Alexa App.
WHERE TO PUT YOUR KNIGHT
Knight works best when placed in a central location, at least eight inches from any walls. You can put
Knight in a variety of places—on a kitchen counter, the end table in your living room, or a nightstand.
TALKING TO KNIGHT
To get Echo Knight's attention, simply say "Alexa." See the Things to Try card to help you get started.
“Alexa” is the word you say to get Knight’s attention. Say this “wake word” and then tell Knight what
you want to do. You can change your wake word to “Amazon” or “Knight” from the Alexa App.

ALEXA APP
The app helps you get more out of your Knight, and is available for Fire OS, Android, iOS, and web. You
can use the app to manage your contacts, lists, music, settings, and see an overview of your requests.
THINGS TO TRY
The “Things to Try” card included in this guide provides examples of things you can ask Knight. Keep this
card to help you get started.
GIVE US YOUR FEEDBACK
Alexa will improve over time, giving you access to new features and ways to get things done. We want to
hear from you about your experiences. Use the Alexa App to send us feedback or e-mail echoknight-
[e-mail].
Product Information
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its
instructions, may cause interference to radio communications and electronic equipment. External RF
signals may affect improperly installed or inadequately shielded electronic operating systems,
entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with
the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with
your physician or the manufacturer to determine if they are adequately shielded from external RF
signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and
construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile
phones should be turned off.

FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could
make the device no longer comply with the FCC Rules.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio frequency exposure limits
set by the Federal Communications Commission of the United States (FCC) and Industrial Canada for an
uncontrolled environment.
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or
recycle the Products in accordance with your local laws and regulations. For information about recycling
the Products can be found in the Legal & Compliance section of the Setting menu on your Fire tablet.

IC Statement
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une
utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
CAN ICES-3(B)/NMB-3(B)
Product Specifications
Equipment name: Digital Media Receiver
Model: VN94DQ
Ports: Power Port
Power: 12VDC 1.25A output power adapter (Sold in-box)
Audio —3.5 mm stereo jack and integrated mono speaker.
Operating temperature —32°F to 95°F (0°C to 35°C).
Connectivity —Dual Band Wi-Fi (2.4 GHz&5 GHz); 802.11a/b/g/n/ac; BT 3.0, BLE 4.1

Recycling Your Device Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or
recycle your device in accordance with your local laws and regulations. For information about recycling
your device, go to www.amazon.com/devicesupport.
5GHz帯(W52, W53)は屋内利用に限る(高出力システムと通信する場合を除く)
5GHz band (W52,W53): Indoor use only (except communicate to high power radio)
Operating frequency-
WLAN 2.4GHz: 2412 - 2472 MHz
WLAN 5GHz: 5150–5250 MHz, 5250–5350 MHz, 5470–5725 MHz, 5725–5850 MHz
Bluetooth 3.0 / 4.1: 2402 – 2480 MHz