AmazonBasics Vertical Ergonomic User manual

DISCLAIMER / 免责声明
DO NOT PRINT THIS PAGE!
不要打印此页面！
Service type What is included? What is NOT included? Performed
Service
New Manual
Writing
• New manual development
• Research about norms and legal standards applicable to
this product
• Inclusion of regulations listed in technical protocol
provided by lab.
• Project Management and Communication with Vendors
• Technical Drawing creation
• Color marking of mandatory safety instructions and
common market practice
• Translation to required additional languages and
multilingual desktop publishing
Rebranding
• Vendor manual Impala QC check
• Professional proofreading of the English vendor manual
• Typesetting into Amazon standard layout
• Technical Drawing creation
• Translation to required additional languages and
multilingual desktop publishing
• Review / Compliance check of safety
instructions provided by vendor
• Review / verification of operational parts
Vendor Paper size Market Manual type
Color codes
Safety instructions marked in BLUE
• Mandatory safety instructions taken from the applicable
standard / norm.
• Content is based on the safety standard.
• Text can be modified only in selected cases.
Safety instructions marked in ORANGE • Common market practice safety instructions. Not mandatory but
suggested.
• NOTE: Some safety instructions may apply to selected jurisdictions (United States, Canada, United Kingdom, European Union) only.
• NOTE: These color codes are intended to ease the validation process for Amazon and the lab. The color notes will be deleted prior to publication of the
document.
Dongguan Maetay Electronics Co.,Ltd.
Amazon Standard Size
Global
Normal UM

B07NR78GS6
Vertical Ergonomic 2.4G Wireless Optical Mouse
Product Name FR
Product Name DE
Product Name IT
Product Name ES
Product Name JP

English ..................................... 3
Français .................................XX
Deutsch..................................XX
Italiano ...................................XX
Español ..................................XX
日本語 .................................... XX

3
Welcome Guide •English
Contents:
Before getting started, ensure the package contains the following components:
dpi
G
F
E
D
B
L
A
C
H
I
J
K
ARight button GDPI button
BLeft button HON/OFF switch
CScroll wheel ISensor
DForward button JBattery cover
EIndicator light KAAA / LR03 batteries
FBackward button LNano receiver

4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this product is passed
to a third party, then these instructions must be included.
When using electrical appliances, basic safety precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons including the following:
• Read all instructions.
• Only use this product for its intended use.
• Do not use this product if damaged.
• Do not insert any foreign objects into the inside of the casing.
• Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight,
water, high humidity, moisture, strong jolts, flammable gases, vapors and solvents.
Risk of eye damage! Do not look directly into the sensor to avoid causing any
harm to the eye.
Battery Warnings
• Do not mix old and new batteries or batteries of different types or brands.
• Exhausted batteries should be immediately removed from the product and properly disposed.
• Keep batteries out of the reach of children.
• Do not dispose of batteries in fire.
• Remove batteries from product if it is not to be used for an extended period of time unless it is
for emergency purposes.
• If the battery leaks, avoid contact with skin and eyes. Rinse affected areas immediately with
plenty of water. Then, consult a doctor.
• Store unused batteries in their original packaging away from metal objects. If already unpacked,
do not mix or jumble batteries.
Intended Use
• This product is a wireless computer peripheral intended for interacting with your desktop/
laptop.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with
these instructions.
CAUTION

5
Before First Use
• Check for transport damages.
Risk of suffocation! Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Setup
Inserting batteries
K
J
• Remove the battery cover (J).
• Insert two AAA / LR03 batteries (K).
Always insert batteries correctly with regard to polarity (+ and -) marked on the
battery and the product.
Replace the batteries, when the indicator light (E) flashes 10 times.
DANGER
NOTICE
NOTICE

6
Setup
Pairing
H
J
L
• Take out the nano receiver (L) and close the battery compartment.
• Plug the nano receiver into a USB port on the computer.
• Slide the ON/OFF switch (H) to the ON position.
The nano receiver automatically pairs with the mouse. If the connection fails or
is interrupted, switch the mouse off. Subsequently, disconnect and reconnect
the receiver, and slide the ON/OFF switch to the ON position again.
NOTICE

7
Operation
Functions
• Forward button (D): Press this button to view the next page in your Internet browser.
• Backward button (F): Press this button to view the previous page in your Internet browser.
• Left button (B): Performs left click function according to the computer settings.
• Right button (A): Performs right click function according to the computer settings.
• Scroll wheel (C): Moves up/down on the computer screen. Offers a third click function
according to the computer settings.
• ON/OFF switch (H): Switches the mouse on and off.
• DPI button (G): Toggles between three DPI settings: 800 DPI, 1200 DPI (default) and 1600 DPI.
The indicator light (E) flashes once for 800 DPI, twice for 1200 DPI and 3times
for 1600 DPI.
Features
• Multi-level intelligent power-saving: This feature limits the current consumption based on the
duration for which the product is idle. The product enters one of the three levels of sleep mode
that allow power-saving. This is listed in the table below:
Product idle for Sleep mode Current consumption
1second First-class; move the product
to wake it
< 0.3mA
45 seconds Second-class; move the
product to wake it
< 0.2mA
8minutes Third-class; press any button
or move the scroll wheel to
wake it
< 30 uA
The sensor LED goes off in the third-class sleep mode.
• Low-voltage indicator: At low-voltage (between 1.9V and 2.1V), the indicator light (E)
continuously flashes 10 times and then goes out. This suggests that the batteries need to be
replaced. The product continues to operate. However, when the voltage falls below 1.9V the
product will stop operating.
NOTICE
NOTICE

8
Cleaning and Maintenance
Switch the product off before cleaning.
Do not immerse the electrical parts of the product in water or other liquids.
Never hold the product under running water.
Cleaning
• Clean the battery contacts and also those of the product prior to battery installation.
• To clean, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to
clean the product.
Maintenance
• Store in a cool and dry place away from children and pets, ideally in original packaging.
• Avoid any vibrations and shocks.
FCC Compliance Statement
1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
NOTICE
NOTICE

9
• Consult the dealer or an experienced radio/TV technician for help.
Canada IC Notice
• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
• This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
• This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard.
Simplified EU Declaration of Conformity
• Hereby, Amazon EU Sarl declares that the radio equipment type B07NR78GS6 is in compliance
with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the following internet address:
https://www.amazon.co.uk/amazon_private_brand_EU_compliance
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the
impact of electrical and electronic goods on the environment, by increasing re-use and
recycling and by reducing the amount of WEEE going to landfill. The symbol on this
product or its packaging signifies that this product must be disposed separately from
ordinary household wastes at its end of life. Be aware that this is your responsibility
to dispose of electronic equipment at recycling centers in order to conserve natural
resources. Each country should have its collection centers for electrical and electronic
equipment recycling. For information about your recycling drop off area, please contact
your related electrical and electronic equipment waste management authority, your local
city office, or your house hold waste disposal service.

10
Battery Disposal
Do not dispose of used batteries with your household waste. Take them to an
appropriate disposal/collection site.
Specifications
Power supply (voltage/battery type): 2x 1.5V AAA / LR03 batteries
Current consumption: < 10 mA
Weight (without battery): approx. 3.3oz (94 g)
Dimensions (L x W x H): approx. 4.8x 2.8x 3.1in (124 x 71 x 78 mm)
OS compatibility: Windows, Mac, Linux
Transmission power: < 0dBm
Frequency band: 2408 – 2474 MHz
Ambient working temperature: -4to +131 °F (-20 to +55 °C)

11
Warranty Information
To obtain a copy of the warranty for this product:
For US - Visit amazon.com/AmazonBasics/Warranty
For UK - Visit amazon.co.uk/basics-warranty
— or —
Contact Customer Service at 1-866-216-1072
Feedback
Love it? Hate it?
Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high
standards. We encourage you to write a review sharing your experiences with the product.
Please visit: amazon.com/review/review-your-purchases#
For further services:
Visit amazon.com/gp/help/customer/contact-us
— or —
Contact Customer Service at 1-866-216-1072

中国製
HECHO EN CHINA
PRODOTTO IN CINA
HERGESTELLT IN CHINA
FABRIQUÉ EN CHINE
MADE IN CHINA
amazon.com/AmazonBasics