Ambient NanoLockit User manual

NanoLockit
ACN-NL
2. Safety Instructions
For your own safety and trouble-free use of your device
please carefully read through the instructions below.
Always keep a copy of these instructions and hand them
out with the unit to other users.
This unit is exclusively intended for indoor use. Keep it
safe and away from water, rain and humidity and dry
under all circumstances even when powered off. Clean
gently with a slightly moistened cloth and never let
water, detergents or liquids of any kind get into the unit
as this will imply the risk of short circuits and electrical
hazard.
Keep distant from sources of heat and never expose to
direct sunlight. Admissible ambience temperature is
from +5° to +50° Celsius.
Do not throw or expose to mechanical impact and keep
it safe from hard vibrations.
Only use genuine accessories such as cables etc.
supplied by an authorized dealer. Always observe
integrity and the pertinent compatibility with all units
connected to.
Do not perform software updates in situations the
integrity of power supply cannot be granted such as
thunderstorms and remove connections from and to all
devices directly or indirectly connected to mains.
Only use certified USB sources compliant with Battery
Charging 1.2 of the USB standard to charge or power.
On mains adapter, pay attention to the use of LPS
sources in compliance to part 2.5 of EN 60950-1.
Disregard may cause battery leakage or even risk of
explosion.
When using the wireless connection place it centrally
and keep it distant from sources of possible interfe-
rence such as microwaves or electrical devices with
large metal surfaces.
Never open the unit. Inappropriate and unauthorized
access will void the warranty and imply possible risk of
harm to the user.
Dispose the unit following the legal requirements for
recycling electronic equipment.
3. Powering
The ACN-NL can be charged and powered via
microUSB from any source complying to BC1.2 of the
USB standard.
On charging the red LED will slowly blink to indicate
charging of the integrated battery. Fully charged, red
and green LED will be lit permanently.
4. Warranty
Ambient Recording GmbH warrants against defects in
materials and workmanship for a period of ONE (1) year
from date of original retail purchase. This is a
non-transferable warranty that extends only to the
original purchaser. Ambient Recording GmbH will repair
or replace the product at its discretion at no charge.
Warranty claims due to severe service conditions will be
addressed on an individual basis. THE WARRANTY AND
REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. AMBIENT
RECORDING GMBH DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. AMBIENT RECORDING GMBH IS NOT RESPON-
SIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES ARISING FROM ANY BREACH OF WARRANTY
OR UNDER ANY OTHER LEGAL THEORY. Because some
jurisdictions do not permit the exclusion or limitations
set forth above, they may not apply in all cases.
For all service, including warranty repair, please send the
product, along with proof of purchase date to your
retailer, or, if not applicable, to:
Ambient Recording GmbH
Schleissheimer Str. 181 C
DE – 80797 Muenchen, Germany
Please obtain a return authorization through the contact
form on our website before sending in a unit.
1. Package Contents
1x NanoLockit (ACN-NL)
2x additional antenna caps (NL-AntK)
2x Velcro (NL-DL)
1x Taljereep (NL-UHB)
1x Timecode cable (TC-IO-35RA)

NanoLockit
ACN-NL
5. Approvals
CE Conformity Statement:
Declaration of Conformity
According to ISO/IEC Guide 22
Manufacturer’s Name:
Ambient Recording GmbH
Manufacturer’s Address:
Schleissheimer Str. 181 C, DE – 80797 Muenchen,
Germanydeclares that the product: ACN-NL NanoLockit
is in conformity with:
- EN 60950-1:2006 +
A11:2009+A1:2010+A12:2011+AC:2011
- EN 300 440-1 V1.6.1
- EN 300 440-2 V1.4.10
- EN 301 489-1 V1.9.2
- EN 301 489-3 V1.4.10
which is indicated and affirmed by the applied CE
marking.
FCC Statement
The FCC requires that the following statements be
included in this manual for ACN-ML:
FCC § 15.19
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operati-
on.
Canada CNR-Gen Section 7.1.3
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:(1) this device may not cause
interference, and (2) this device must accept any interfe-
rence, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouilla-
ge, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
FCC § 15.21
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC § 15.105
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
ICES-003
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Ambient Recording GmbH
Schleissheimer Straße 181 C | DE – 80797 Munich
vox [phone] | fax [phone]
www.ambient.de | [email protected]
© 2017, Ambient Recording GmbH
MADE IN GERMANY
experience quality.