Ambush H.264 Network Digital Video Recorder Parts list manual
H.264 Network Digital Video Recorder
Mouse Navigation
Section Page
COMPATIBILITY LIST…………………………………………………………………………………… 3
INSTALLATION…………………………………………………………………………………………. 4
NAVIGATION…………………………………………………………………………………………….. 5-9
PREVIEW/LIVE 5
ALPHA-NUMERIC 6
MENU 7
PTZ 8
MOTION DETECTION AREA 9
PRIVACY MASK AREA 9
EXAMPLE………………………………………………………………………………..…………….. 10
$PEXVK7HFKQRORJLHV
2 of 10
CONTENTS
The $PEXVKH.264 digital video recorders support the use of a USB mouse for navigating the OSD. Below
are the models that have been tested to work.
-Belkin F8E814-BLK-OPT
-Logitech M-UV83
-BenQ M800
-ViewSonic MC204
-Philips SPM4500BB/93
-LG LGIM-ML208
-Goldfly GF-OP718
-NewMen MS027O
-Aglie AGM-018LU
-Aigo
-Lenovo
$PEXVK7HFKQRORJLHV
3 of 10
COMPATIBILITY
Simply plug the USB mouse into the front USB port, behind the CD-RW door. If the mouse is
compatible, within 15 seconds a cursor will appear on screen. If no cursor appears, the mouse being
used is not compatible.
$PEXVK7HFKQRORJLHV
4 of 10
INSTALLATION
Preview/Live Navigation
Left-Click: Toggles between single channel view / multi-channel views
Right-Click: Single Channel View – View next channel
Multi-Channel View - View next set of channels
Double Left-Click: Enter Menu (See the Menu section of this manual for details)
Double Right-Click: Move the cursor over the camera you want to view full screen and
double right-click
Scroll Up: Enter Playback/Search
Scroll Down: Enter 24/7 Manual Record Setup
Scroll Button: Enter PTZ Control (See the PTZ section of this manual for details)
$PEXVK7HFKQRORJLHV
5 of 10
NAVIGA
TION
Alpha-Numeric Navigation
Left-Click: Selects alpha-numeric field to edit (ex: password field)
Right-Click: Exit
Scroll Up: After selecting a field, moves the alpha-numeric cursor backward
Scroll Down: After selecting a field, moves the alpha-numeric cursor forward
Scroll Button: After selecting a field, Enter Alpha-Numeric Display
Alpha-Numeric Display:
Edit: Deletes character
A: Toggle between number, uppercase, lowercase, symbol
$PEXVK7HFKQRORJLHV
6 of 10
Menu Navigation
Left-Click: Enter/Select
Right-Click: Exit
Scroll Up: After selecting a field, Cycle through options
Scroll Down: After selecting a field, Cycle through options
Scroll Button: After selecting an alpha-numeric field, Enter Alpha-Numeric Display
$PEXVK7HFKQRORJLHV
7 of 10
PTZ Navigation
To enter PTZ Control mode you must be in preview/live view and depress the scroll button
Left-Click: Enter/Select
Right-Click: Exit
Scroll Up: View/Control next camera
Scroll Down: View/Control previous camera
Hint: If using a speed dome, left-click the pan arrow once for slow movement, left-click
again within 1 second for faster speeds. Repeated left-clicks within 1-2 seconds will
change the pan speed on speed domes.
$PEXVK7HFKQRORJLHV
8 of 10
Iris Open/Close
Focus Far/Near
Zoom In/Out
Pan/Tilt
Motion Area/ Privacy Mask Area Navigation
To select a large area, simply use the left mouse button and drag to select the area. Must
drag left to right and up to down.
Left-Click: Set/Unset cell
Right-Click: Exit without saving
Scroll Up: Deselect All
Scroll Down: Select All
Scroll Button: Exit and save settings
Red: Motion Detect Enabled / Privacy Mask Enabled
Blue: Motion Detect Disabled / Privacy Mask Disabled
$PEXVK7HFKQRORJLHV
9 of 10
Entering the Menu
1. Ensure the DVR is in preview/live view
2. Double-Click left mouse button
3. Move cursor over the password field and left click
4. Depress the Scroll Button
5. Cursor over and left-click on the numbers for the password (default: 1,2,3,4,5)
6. Cursor over “Confirm” and left-click
$PEXVK7HFKQRORJLHV
10 of 10
EXAMPLE
Table of contents
