Amcrest SmartHome AL-KIT1-PP User manual

2
2
Quick Start Guide
Alarm Door/Window Sensors
Model: AL-CONSEN1 Model: AL-KIT1-PP
Amcrest
Alarm Hub
Required
Not Included
We’d Love to Hear From You!
We wanted to personally reach out and thank you for
purchasing from our Amazon store. Selling on Amazon is
what we do to support our family, and product reviews
are the lifeblood of our business. It would mean the world
to us if you could take one minute of your time to help
share the love by leaving us an honest review using the
link below:
www.amazon.com/ryp
Thank you again for being one of our amazing customers!
Sincerely,
Amcrest Team

3
What’s Included?
Door/Window
Sensor Set
Pin
Mounting
Adhesive
*This may include one or more depending on the
package purchased. To purchase additional sensors,
visit us at amcrest.com
Overview
Magnet
Battery
Slot
Sensor
LED
Indicator
Pin Insert
01
Product
Overview
4
LED Behavior
Please refer to the table below for details regarding the LED
behavior of the device.
Specifications
Environment Indoor
Max Detection Distance Less than 3/4”
Operating Temperature 14°F ~ 113°F
Operating Humidity 0-95% RH
Battery Life Up to 1 Year
Protocol Bluetooth 5.0
Battery Type CR1632
Behavior Description
Flashing Rapidly
Solid (for 2 seconds)
Sensor is pairing.
Pairing successful
Flashing (3 times) Pairing failed.
**Try repeating setup.
Flashing Rapidly
(after pairing) Alarm has been triggered after
Steady Flash Firmware upgrade is in progress.

5
Pairing the Sensor
4. Test the sensor by moving
the small magnetic portion
along the right side of the
sensor. The LED on the
sensor will flash once it has
detected motion.
6
IMPORTANT: Install the magnet to the right of the sensor.
Note: For more information on
how to change a battery, please
visit amcrest.com/support
Note: It is recommended to keep the small
magnetic portion 3/4” away from the sesnor. Do
not place the the small magnetic portion directly
on the sensor.
Installing the Sensor
Location tips:
• Install the sensor in an indoor environment.
• If you are using a door, place the sensor at the top of your door to
keep safe from being bumped and out of reach rom children or pets.
•The sensor and magnet must be in line with each other and no
more than 3/4” apart.
1. Choose an area for the sensor to be
placed such as a window or door.
2. Ensure that the bluetooth connection
is steady to the hub before mounting.
3. Peel the mounting adhesive, stick it
to the frame and attach the sensor.
Repeat this step for the magnet and
attach it to the door or window.
4. Open and close the door or window
to ensure the sensor stays in place.
3/4 ”
1. Locate the Alarm Hub on
the main menu.
2. Tap on the “+” icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish setting up
the sensor.

7
Changing the Battery
The sensor uses a CR1632 cell type battery. The battery
typically lasts up to one year before it needs to be replaced.
Note: For more information
on this and other products
visit:
amcrest.com/support
8
Online Quick Start Guide
amcrest.com/support
Need help?
[email protected]
How can we help?
We are dedicated to providing the highest quality
support to our customers and are available 7 days
a week.
1. Make sure that the alarm hub is disarmed before
changing the battery.
2. Use the wide portion of the pin to open the sensor from
the battery slot.
3. Slide the old battery out of the sensor and replace it with
a new battery.
4. Snap the top portion of the sensor into place and secure
it to the bottom portion of the sensor.