Amcrest AGPS26E24P-AT-240M User manual

16/24-Port PoE Switch User’s Manual
Version 1.0.3.
Revised September 5th, 2018

2
Contents
Important Safeguards and Warnings................................................................ 4
1Overview ......................................................................................................... 5
1.1 Product Introduction ................................................................................. 5
1.2 Product Features ....................................................................................... 5
2Device Structure .............................................................................................. 5
2.1 Structure of AGPS26E24P-AT-240M ........................................................... 5
2.1.1 Front Panel .......................................................................................... 5
2.1.2 Rear Panel ........................................................................................... 6
2.2 AGPS18E16P-AT-190M Front Panel ............................................................ 6
3Log in Switch.................................................................................................... 7
3.1 Switch Login............................................................................................... 7
4Web Interface .................................................................................................. 8
......................................................................................................................... 8
4.1. Device Info ................................................................................................... 9
4.2. System Config............................................................................................... 9
4.2.1. System Info................................................................................................ 9
4.2.2. Network Configuration............................................................................ 11
4.2.3. Software Update ..................................................................................... 12
4.2.4. Password Change .................................................................................... 12
4.2.5. Restore Default ....................................................................................... 13
4.2.6. System Reboot ........................................................................................ 13
4.2.7. Log Information....................................................................................... 14
4.3. Port Management ...................................................................................... 15
4.3.1. Port Configuration................................................................................... 15
4.3.2. Port Mirroring ......................................................................................... 16
4.3.3. Port Statistics .......................................................................................... 17
4.3.4. Port Speed Limit...................................................................................... 18
4.3.5. Broadcast Storm Control ......................................................................... 19

3
4.3.6. Long Distance.......................................................................................... 20
4.4. Device Management .................................................................................. 20
4.4.1. Spanning Tree.......................................................................................... 21
4.4.2. VLAN ....................................................................................................... 22
4.4.3. Link Aggregation...................................................................................... 25
4.4.4. QoS Settings............................................................................................ 25
4.4.4.4. Priority Mode....................................................................................... 26
4.4.4.5. QoS Based on Port/802.1p/DSCP ......................................................... 27
4.4.4.6. TCP/UDP Port ....................................................................................... 28
4.4.5. Security................................................................................................... 29
....................................................................................................................... 30
4.4.6. SNMP ...................................................................................................... 31
4.4.7. 802.1X..................................................................................................... 36
4.4.8. IGMP Snooping ....................................................................................... 39
4.5. PoE............................................................................................................. 40
4.5.1. PoE Settings............................................................................................. 40
4.5.2. PoE Event Statistics.................................................................................. 42
4.5.3. Green PoE ............................................................................................... 43
Appendix I Technical Specifications................................................................... 44
FCC Compliance Statement............................................................................... 45

4
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product to avoid
damages and losses.
Attention:
Please read the following safeguards and warnings carefully before using the product to avoid damages and
losses.
Note:
⚫Do not expose the device to liquid, steam or dust. Otherwise it may cause fire or electric shock.
⚫Do not install the device to direct sunlight or in high temperature areas to avoid damage or fire.
⚫Do not install the device in humid conditions.
⚫The device must be installed on solid and flat surface to guarantee safety and stability.
⚫Do not place the device on any carpet or quilt material.
⚫Do not block the air vent of the device or any ventilation around the device.
⚫Do not place any objects on top the device.
⚫Do not disassemble or provide maintenance to the device without professional assistance.
Special Announcement:
⚫This manual is for reference only.
⚫All the designs and software here are subject to change without prior written notice.
⚫All trademarks and registered trademarks are the properties of their respective owners.
⚫If there is any uncertainty or controversy, please refer to the final explanation of us.
⚫Please visit our website for more information.
⚫The function of the ITE being investigated to IEC 60950-1 is considered not likely to require connection
to an Ethernet network with outside plant routing, including campus environment.
⚫The installation instructions clearly state that the ITE is to be connected only to PoE networks without
routing to the outside plant.
Applicable Models:
The manual can be applied to the following models:
AGPS18E16P-AT-190M, AGPS26E24P-AT-240M

5
1 Overview
1.1 Product Introduction
This product is a type of managed switch, it provides 16/24*10/100M PoE Ethernet port and 2 uplink Combo
1000M ports, supports layer 2 network management and PoE management functions based on Web, which
helps to realize high speed data forwarding. It can be widely applied in places like security surveillance, network
management and so on.
1.2 Product Features
⚫Provide web-based layer 2 network management.
⚫Support 250 meters long distance transmission.
⚫Support 2*1000M Combo ports.
⚫Support 16/24*10/100M self-adaptive RJ45 ports.
⚫Support one Console port.
⚫Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards.
⚫Standard 802.1Q VLAN(Access/Trunk/Hybrid)
⚫All ports auto adapt to MDI/MDIX mode.
⚫MAC auto learning and aging, MAC address list capacity is 4K.
⚫IEEE802.3X full duplex flow control and Backpressure half duplex flow control.
⚫Support AC 100~240V power supply.
⚫Conform to IEEE802.3af and IEEE802.3at standards, both port 1 and port 2 support Hi-PoE 60W.
⚫Support PoE power consumption management.
⚫Support SNMP V1/V2/V3 network management.
⚫Support STP/RSTP ring network protocol.
⚫Support manual aggregation and static LACP.
⚫Support many-to-one mirroring.
⚫Support port MAC binding.
⚫Excellent isolated circuit protection.
⚫Lightning protection up to level 4.
2 Device Structure
2.1 Structure of AGPS26E24P-AT-240M
2.1.1 Front Panel
Figure 2-1

6
Refer to table 2-1 for the front panel description of PFS4226-24ET-240/360.
SN
Parameter
Note
1
RJ45 port
Ethernet port, support 10/100M self-adaptation
2
Combo port
Ethernet port, support 10/100/1000M self-adaptation,
Fiber port supports 1000M.
3
Reset button
Long press the button to reset the device and recover
default configuration.
4
Console serial port
Device debugging port
5
PoE power usage indicator
Current power consumption display
6
Downlink indicator light
Current port link status and PoE status.
7
Combo port indicator light
Combo port indicate link/act
8
System indicator light
System status.
⚫When device is booting up, the light is flashing
quickly.
⚫When device is working properly, the light is flashing
slowly.
9
Power indicator light
Device current power status.
Table 2-1
2.1.2 Rear Panel
123
Figure 2-2
Refer to table 2-2 for the description of rear panel.
SN
Parameter
Note
1
Power switch
Control device power on and off
2
Power socket
Support AC 100～240 V
3
Ground terminal
Ground wire
Table 2-2
2.2 AGPS18E16P-AT-190M Front Panel
Figure 2-3
Refer to table 2-3 for more details.

7
SN
Parameter
Note
1
RJ45 port
Ethernet port, support 10/100M self-adaptation
2
Combo port
Ethernet port, support 10/100/1000M self-adaptation,
Fiber port supports 1000M.
3
Reset button
Long press the button to reset the device.
4
Console serial port
Device debugging port
5
PoE power usage indicator
Current power consumption display
6
Downlink indicator light
Current port link status and PoE status.
7
Combo port indicator light
Combo port indicate link/act
8
System indicator light
System status.
⚫When device is booting up, the light is flashing
quickly.
⚫When device is working properly, the light is flashing
slowly.
9
Power indicator light
Device current power status.
Table 2-3
3 Log in Switch
3.1 Switch Login
To begin configuring the switch you will need to login directly with a laptop or PC. This user interface will allow
you to manage and maintain your switch in a safe easy to use user interface. For a reference of the login screen,
refer to Figure 3-1.
Figure 3-1

8
When logging into your switch, make sure your computer is connected to the same network as the switch. To
login, follow the steps provided below:
1. Modify the IP address and subnet mask of your computer network adapter to 192.168.1.100 and
255.255.255.0 respectively
2. Open Internet Explorer or Safari and put 192.168.1.110 in the address bar.
Note: 192.168.1.110 is the default management address of the switch.
3. Input the username and password in their respective fields and login. If this is your first-time logging
into the switch the default username and password will be admin.
4. Enter the administrator changes password into the new password field and confirm the password and
press Ok to continue.
5. Press Login to log into the web interface.
4 Web Interface
Figure 3-2
As shown in Figure 3-2 the interface for the switch is divided into different sections. These sections include;
Device Info, System Info, and Logout. For more information on the provided sections, refer to the information
below.

9
4.1. Device Info
The device info screen is divided up into WAN and LAN port state displays. These displays show the current
port link state of a connected device as well as the port speed, duplex mode, etc.
4.2. System Config
The system config menu allows you to access and modify a range of different categories related to the overall
performance of the switch. For more information on the features related to this menu, refer to the sections
listed below.
4.2.1. System Info
The system info tab allows you to access a range of different categories related to the overall performance of
the switch.
The system info menu allows you to access three main areas; system information, current time, and CPU usage
for the device. System Info will display the device model of the switch, the MAC address and the current version
of firmware you are running on the switch.

10
The Current Time tab allows you to set the date and time for your unit. To sync the device to the current time
of your PC, click on the Sync PC option. To save your settings, press the Save button. If you do not press the
save button before continuing no information or modifications will be set to the device.
The CPU Usage tab will display the amount of CPU usage in each time by the device. This is averaged in a
percentage from the last five seconds thru the last minute, to the last five minutes.