Amcrest AMPS4E4P-AT-60 User manual

4/8-Port PoE Switch
User’s Manual V. 1.0.0
Simple. Reliable. Secure.
4/8-Port PoE Switch
User Manual V. 1.0.0
Simple. Reliable. Secure.
Uplink
Link/Act PWR
PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE Link/Act Link/Act Link/Act Link/Act
PoE 5 PoE 6 PoE 7 PoE 8
PoE PoE PoE PoE
AGPS8E8P-AT-96
AGPS8E4P-AT-60
AMPS4E4P-AT-60
PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE
5 6 7 8
Link/Act Link/Act Link/Act Link/Act
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE
Default Extend

Important
Safeguards & Warnings
Attention:
Please read the following safeguards and warnings carefully before using the product in order to avoid damages and
losses.
Note:
Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock.
Do not install the device in direct sunlight as it may cause overheating and failure.
Installation of the unit should be via the compatible rack mount or securely on a flat surface.
Do not place the device on carpet or other insulating surfaces. Ex. Rugs, towels, rags, clothing, etc.
Do not block or impede airflow to or around the unit. Doing so may cause overheating, failure or fire.
Do not place stack or place objects on the unit.
This unit contains no user serviceable parts. Servicing should only be performed by approved technicians.
Warning:
Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure
and/or damage.
Special Announcement:
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.

Table
of Contents
1 Product Overview 3
1.1 Features 3
1.2 Typical Application 3
2Device Structure 4
2.1 4-Port PoE Switch 4
2.1.1 Front Panel 4
2.1.2 PoE Power Output 4
2.1.3 Back Cover 4
2.2 8-Port PoE Switch 5
2.2.1 Front Panel 5
2.2.2 PoE Power Supply 5
2.2.3 Back Cover 5
2.3 8-Port PoE Switch 6
2.3.1 Front Panel 6
2.3.2 PoE Power Supply 6
2.3.3 Back Cover 6
3 Installation Guide 6
4 Appendix 1 Technical Specification 7

Product Overview
1.1 Features
Common Features:
Two-layer desktop POE switch.
Conforms to IEEE802.3, IEEE802.3u, and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity up to 8K on 8 port model.
All models support self-adapt MDI/MDIX mode.
Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard.
Support DC48-57V power supply.
Individual Features:
4 Port Model (AMPS4E4P-AT-60)
4-port PoE switch, 4*100Mbps/ self-adaptive PoE ports and 1*10/100M Uplink RJ45 ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-60)
4-port PoE switch, 4*10/100/1000 Mbps self-adaptive PoE ports and 4*10/100/1000Mbps self-adaptive Non-PoE ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-96)
8-port PoE switch supports 8*10/100/1000 Mbps self-adaptive PoE ports.
Total PoE power consumption of 96W.
1.2 Typical Application
The typical application of the device is shown in Figure 1- 1
3
POE Ethernet
NVRSwitch
Amcrest 4/8
Port Switch
Amcrest 4/8
Port Switch
Amcrest 4/8
Port Switch
Camera
Camera
Camera
POE
Optical
POE
Figure 1.1
2.2 8-Port PoE Switch (AGPS8E4P-AT-60)
2.2.1 Front Panel
The front panel is shown in Figure 2-2.
2.2.2 PoE Power Supply
PoE Ports: 4*10/100/1000 M RJ45 PoE ports support IEEE802.3af, IEEE802.3at standard.
PoE port 1 supports up to 60W other 3 PoE ports support up to 30W each.
Total PoE power consumption is less than 60W.
2.2.3 Back Cover
The device power port is shown in Figure 2-4, support DC 48-57V power supply.
Device Structure
2.1 4-Port PoE Switch (AMPS4E4P-AT-60)
2.1.1 Front Panel
The front panel is shown in Figure 2-1.
2.1.2 PoE Power Output
4*10/100M Base-T RJ45 PoE ports support both IEEE802.3af and IEEE802.3at standards.
PoE port 1 supports up to 60W the other 3 PoE ports support up to 30W each.
Total PoE power consumption of less than 60W.
2.1.3 Back Cover
The unit power port is shown in Figure 2-2, support DC 48-57V power supply.

Product Overview
1.1 Features
Common Features:
Two-layer desktop POE switch.
Conforms to IEEE802.3, IEEE802.3u, and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity up to 8K on 8 port model.
All models support self-adapt MDI/MDIX mode.
Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard.
Support DC48-57V power supply.
Individual Features:
4 Port Model (AMPS4E4P-AT-60)
4-port PoE switch, 4*100Mbps/ self-adaptive PoE ports and 1*10/100M Uplink RJ45 ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-60)
4-port PoE switch, 4*10/100/1000 Mbps self-adaptive PoE ports and 4*10/100/1000Mbps self-adaptive Non-PoE ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-96)
8-port PoE switch supports 8*10/100/1000 Mbps self-adaptive PoE ports.
Total PoE power consumption of 96W.
1.2 Typical Application
The typical application of the device is shown in Figure 1- 1
4
SN Name Note
1 DIP Switch Switches between default mode/extend mode.
2 10/100 Base-T 4*10/100 Mbps self-adaptive RJ45 PoE ports.
3 Link/Act, PoE Single port link / single port PoE status indicator light.
4 Link/Act Single port uplink status indicator light.
5 10/100 Base-T 1*10/100 Mbps self-adaptive RJ45 Uplink port.
6 PWR Power indicator light
Sheet 2-1
1
5
Figure 2.1
2.2 8-Port PoE Switch (AGPS8E4P-AT-60)
2.2.1 Front Panel
The front panel is shown in Figure 2-2.
2.2.2 PoE Power Supply
PoE Ports: 4*10/100/1000 M RJ45 PoE ports support IEEE802.3af, IEEE802.3at standard.
PoE port 1 supports up to 60W other 3 PoE ports support up to 30W each.
Total PoE power consumption is less than 60W.
2.2.3 Back Cover
The device power port is shown in Figure 2-4, support DC 48-57V power supply.
Uplink
Link/Act PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE
Default Extend
25
4
Device Structure
2.1 4-Port PoE Switch (AMPS4E4P-AT-60)
2.1.1 Front Panel
The front panel is shown in Figure 2-1.
2.1.2 PoE Power Output
4*10/100M Base-T RJ45 PoE ports support both IEEE802.3af and IEEE802.3at standards.
PoE port 1 supports up to 60W the other 3 PoE ports support up to 30W each.
Total PoE power consumption of less than 60W.
2.1.3 Back Cover
The unit power port is shown in Figure 2-2, support DC 48-57V power supply.
K
Figure 2.2
K
3
6

Product Overview
1.1 Features
Common Features:
Two-layer desktop POE switch.
Conforms to IEEE802.3, IEEE802.3u, and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity up to 8K on 8 port model.
All models support self-adapt MDI/MDIX mode.
Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard.
Support DC48-57V power supply.
Individual Features:
4 Port Model (AMPS4E4P-AT-60)
4-port PoE switch, 4*100Mbps/ self-adaptive PoE ports and 1*10/100M Uplink RJ45 ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-60)
4-port PoE switch, 4*10/100/1000 Mbps self-adaptive PoE ports and 4*10/100/1000Mbps self-adaptive Non-PoE ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-96)
8-port PoE switch supports 8*10/100/1000 Mbps self-adaptive PoE ports.
Total PoE power consumption of 96W.
1.2 Typical Application
The typical application of the device is shown in Figure 1- 1
5
SN Name Note
1 Link/Act, PoE Single port link / single port PoE status indicator light.
2 10/100/1000 Base-T 4*10/100/1000 Mbps self-adaptive PoE ports.
3 10/100/1000 Base-T 4*10/100/1000 Mbps self-adaptive non-PoE ports.
4 PWR Power indicator light.
Sheet 2-2
2.2 8-Port PoE Switch (AGPS8E4P-AT-60)
2.2.1 Front Panel
The front panel is shown in Figure 2-2.
2.2.2 PoE Power Supply
PoE Ports: 4*10/100/1000 M RJ45 PoE ports support IEEE802.3af, IEEE802.3at standard.
PoE port 1 supports up to 60W other 3 PoE ports support up to 30W each.
Total PoE power consumption is less than 60W.
2.2.3 Back Cover
The device power port is shown in Figure 2-4, support DC 48-57V power supply.
Device Structure
2.1 4-Port PoE Switch (AMPS4E4P-AT-60)
2.1.1 Front Panel
The front panel is shown in Figure 2-1.
2.1.2 PoE Power Output
4*10/100M Base-T RJ45 PoE ports support both IEEE802.3af and IEEE802.3at standards.
PoE port 1 supports up to 60W the other 3 PoE ports support up to 30W each.
Total PoE power consumption of less than 60W.
2.1.3 Back Cover
The unit power port is shown in Figure 2-2, support DC 48-57V power supply.
Figure 2.3
DC48-57V
PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE
5 6 7 8
Link/Act Link/Act Link/Act Link/Act
14
3
Figure 2.2
2

6
PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE Link/Act PoE Link/Act PoE Link/Act PoE Link/Act Link/Act Link/Act Link/Act
PoE 5 PoE 6 PoE 7 PoE 8
PoE PoE PoE PoE
SN Name Note
1 Link/Act, PoE Single port link / single port PoE status indicator light.
2 10/100/1000 Base-T 8*10/100/1000 Mbps self-adaptive PoE RJ45 ports.
3 PWR Power indicator light.
Sheet 2-3
1
2
3
Figure 2.4
2
2.3 8-Port PoE Switch (AGPS8E8P-AT-96)
2.3.1 Front Panel
The front panel is shown in Figure 2-3.
2.3.2 PoE Power Supply
PoE Ports: 8*10/100/1000 M RJ45 PoE ports support IEEE802.3af, IEEE802.3at standard.
PoE port 1 supports up to 60W other 7 PoE ports support up to 30W each.
Total PoE power consumption is less than 96W
2.3.3 Back Cover
The device power port is shown in Figure 2-5, support DC 48-57V power supply.
Figure 2.5
DC48-57V

7
Appendix 1
Technical Specification
TECHNICAL PARAMETERS AMPS4E4P-AT-60 AGPS8E8P-AT-60
Ethernet Port
1*10/100 Base-T
4*10/100 Base-T
PoE Power Conumption ≤60W
PoE PIN Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-)
PoE Protocol IEEE802.3af (PoE)
IEEE802.3at (PoE+)
Switching Capacity 1Gbps
Forwarding Rate 744Kpps
Packet Buffer Memory 448Kpps
MAC Table Size 1K
Flow Control Enabled
Application Humidity 5% - 95%
Power Adapter DC48-57V
Lightning Protection Common Mode: 2KV
Differential Mode: 1KV
Working Temperature 14°F - 131°F
Weight 0.64lbs
Dimensions (WxDxH) 5.11” x 3.35” x 1.02”
8*10/100/1000 Mbps PoE Ports
≤96W
1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-)
20Gbps
IEEE802.3af (PoE)
IEEE802.3at (PoE+)
11.9Mpps
1.5Mb
8K
Enabled
10% - 90%
DC48-57V
Common Mode: 2KV
Differential Mode: 0.5KV
14°F - 131°F
1.08lbs
7.48” x 3.93” x 1.18”
4*10/100/1000 Mbps PoE
4*10/100/1000 Mbps Non-Poe
≤60W
1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-)
20Gbps
IEEE802.3af (PoE)
IEEE802.3at (PoE+)
11.9Mpps
1.5Mb
8K
Enabled
10% - 90%
DC48-57V
Common Mode: 2KV
Differential Mode: 0.5KV
14°F - 131°F
1.08lbs
7.48” x 3.93” x 1.18”
AGPS8E8P-AT-96

2020 © Amcrest Industries, LLC
All Rights Reserved.
Made in Texas, Assembled in China.
Phone: [phone]
Learn more at
www.amcrest.com