American Dynamics ADC520D User manual

ADC520 Series
BLACK AND WHITE SPECIALTY CAMERAS
www.americandynamics.net
FEATURES
The ADC520 Series cameras feature a black and
white imager that delivers a sharp picture at a
very economical cost.
The ADC520 Series offers cameras in housings
different than your typical standard camera.
The ADC520D features a 3.5-inch discreet
dome housing that is an attractive alternative
to a standard camera.
The ADC521B features a low silhouette tube
design that will fit in with most decors.
The ADC522WP is a weather resistant tube
design that meets IP57 for weather resistance.
The built in IR illumination LEDs allow this
camera to produce a picture with 0 lux ambient
light. The 12 IR LEDs provide coverage up to
10 meters (30 ft) to deliver a sharp picture while
producing no visible light.
The ADC523PIR is a camera mounted in a
standard motion detector shell. The camera
blends in to the background appearing as a
security system device. People are unaware that
there is video surveillance in the area.
•1/3-inch interline black
and white imager, EIA
format
•380-line B/W imager
•Sharp picture
•0.5 lux light sensitivity
•Sensitive to IR
illumination
•Discreet housings
•Automatic electronic
shutter
•Automatic gain control
•12 VDC input via
included power supply
•ADC522WP includes IR
illumination and is
weather resistant

AMERICAN DYNAMICS ADC520 SERIES BLACK AND WHITE SPECIALTY CAMERAS
Product specifications and availability subject to
change without notice.
Certain product names mentioned herein may be trade
names and/or registered trademarks of other companies. VS280-04 03/04 L
©2004 Sensormatic Electronics Corporation
SPECIFICATIONS
Model Numbers
ADC520D . . . . . . . . . . . . . . . . . . . .B/W camera in 3.5-inch micro dome with
3.6 mm lens
ADC521B . . . . . . . . . . . . . . . . . . . .B/W camera in Bullet Housing with
3.6 mm lens and mount
ADC522WP . . . . . . . . . . . . . . . . . .B/W camera in weatherproof Bullet
Housing with 4.0 mm lens and IR
illuminators and mount
ADC523PIR . . . . . . . . . . . . . . . . . .B/W camera in non-functional PIR
detector housing with 3.6 mm lens
Operational
EIA Imager . . . . . . . . . . . . . . . . . . .Interline transfer 1/3-inch CCD
Video Output . . . . . . . . . . . . . . . . .1.0 Vp-p 75
Active Pixels Count . . . . . . . . . . . .510 (H), 492 (V)
Minimum Scene Illumination . .0.5 lux at F2.0
Horizontal Resolution . . . . . . . . .380 TVL
Light Compensation Modes . . .Auto electronic shutter
1/60 to 1/100,000
Synchronization Modes . . . . . . .Internal
Geometric Distortion . . . . . . . . .None
S/N Ratio . . . . . . . . . . . . . . . . . . . .-48 dB
Input Connectors
Input Power . . . . . . . . . . . . . . . . . .2.1 mm
Composite Video . . . . . . . . . . . . .BNC on cable
Electrical
Input Voltage . . . . . . . . . . . . . . . . .120VAC @ 60Hz
Power Supply Output . . . . . . . . .12VDC (±10%)
Power Consumption . . . . . . . . . .ADC520D 120 mA
ADC521B 120 mA
ADC522WP 120 mA
ADC523PIR 240 mA
Regulatory
Emissions . . . . . . . . . . . . . . . . . . . .FCC Part 15, Class B
ICES-003
Safety . . . . . . . . . . . . . . . . . . . . . . . .UL 1585 (power supply only)
Environmental
Operating Temperature . . . . . . . .-10º to 50º C (14º to 122º F)
Humidity . . . . . . . . . . . . . . . . . . . . .90% RH (non-condensing)
ADC522WP . . . . . . . . . . . . . . . . . .100% RH
Storage Temperature . . . . . . . . . .-30º to +60º C (-22º to 140º F)
Dimensions

Weight

Shipping Weight

Environmental
ADC520D
87 x 57 mm
3.4 x 2.2 in
(D x H)

.18 kg
.40 lbs

.43 kg
.90 lbs 

Indoor Only
ADC521B

26 x 87 mm
1.02 x 3.4 in
(D x L)

.30 kg
.70 lbs

.55 kg
1.20 lbs 

Indoor Only
ADC523PIR

70 x 110 x 49 mm
2.7 x 4.3 x 1.9 in
(W x H x D)

.18 kg
.40 lbs 

.43 kg
.90 lbs 

Indoor Only
ADC522WP

65 x 105 mm
2.5 x 4.1 in
(D x L)

.55 kg
1.20 lbs 

.80 kg
1.80 lbs

IP57

Note: All ADC520 Series cameras ship with a 120 VAC to 12 VDC UL listed power supply with a 6 foot cord. 12 VDC
cameras will not line-lock and are not recommended to be used in a matrix switcher environment.