Inst ll tion Guide
1
Installation Overview
Note: Dr wers re remov ble. Pull the dr wer full out, h ng onto the l tch, nd gently t p
the bottom up. The dr wer should pop out. This m y id in the inst ll tion process.
Step 1:
Comp rtment side nd outer dr wer side f ce should be flush. This will llow the dr wers to open
unobstructed by the comp rtment.
Step 2:
Push the dr wer set tight to the b ck of the comp rtment. This llows for 5/16-18 UNC c p
screw to be used to tie the dr wer shelf to the b ck w ll.
Step 3:
Extend the djust ble dr wer shelf end tight to the front w ll of the comp rtment. This llows for
5/16-18 UNC c p screw to be used to tie the dr wer shelf to the side w ll. Repe t for other shelf
end if pplic tion llows.
Step 4:
Drill four(4) .344 holes for mounting of the dr wer set to the floor of the comp rtment. Use 5/16-18
UNC c p screws to f sten dr wer set to floor.
