American Legend BROOKDALE AL3020W/F User manual

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
1
All Rights Reserved.
1-888-996-2729
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Your Model Number ____________________
have your model number when inquiring about parts.
[email protected]
Please
Date Code ___________________________
2 - AL3020W- - MW
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Purchase Date ________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
AL3020W/F

Make sure you understand the following tips before you begin to assemble your billiard table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS 90'' BROOKDALE BILLIARD TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO ASSEMBLE THIS TABLE.
Furniture Polish and Cloth
ATTENTION:
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
2
All Rights Reserved.
Phillips Screw Driver
Allen Wrench (included)
Hex Wrench (included)
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.

H1 - 5/16’’ x 1-1/2’’ Allen Head Bolt
(12 pcs)
H2 - 1/4’’ x 1-3/4’’ Allen Head Bolt
(26 pcs)
H3 - 4mm x 32mm Phillips Round Head Screw
(16 pcs)
H4- 5/16’’ Flat Washer
(12 pcs)
H7 - 5/16’’ Lock Washer
(12 pcs)
H5- 1/4’’ Flat Washer
(36pcs)
（Not to Scale)
（Used on H7 Hex Hut)
（Not to Scale)
HARDWARE IDENTIFIER
(To Scale)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.
T1 - Allen Wrench
(1 pc)
T2 - Hex Wrench
(1 pc)
H6- 1/4’’ Hex Nut
(10 pcs)
H8 - 1/4’’ Lock Washer
(26 pcs)

P1 - Main Cabinet
(1 pc)
P2 - Leg A
(2 pcs)
P3 - Leg B
(2 pcs)
P4 - Leg Cross Support
(2 pcs)
P6 - Turnbuckle Support
(2 pcs)
P9 - Leg Leveler
(4 pcs)
PARTS IDENTIFIER
(Not to Scale)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
P7 - Leg Cross Support Plate
(4 pcs)
Note: Will install onto P4 Leg
Cross Supports
P5 - Leg Panel
(2 pcs)
P8 - Cabinet Support Plate
(2 pcs)

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
ACCESSORIES IDENTIFIER
(Not to Scale)
A1 - Billiard Ball Set
(1 pc)
A2 -Pool Cue
(2 pcs)
A3 - Triangle
(1 pc)
A4 - Cue Chalk
(2 pcs)
A5 - Playfield Brush
(1 pc)

PARTS REQUIRED
2pcs -
P2 Leg A
2pcs - P3 Leg B 12pcs - H7 Lock Washer
12pcs - H1 Allen Head Bolt
12pcs - H4 Flat Washer
STEP 1
STEP 2
Attach the P2 Leg A, P3 Leg B onto the P1 Main Cabinet using the H1 Allen Head Bolts, H7
Lock Washers, H4 Flat Washers as shown in FIGURE 2.
Attach the P8 Cabinet Support Plate onto the P1 Main Cabinet
Support Brace using the H2 Allen Head Bolts, H5 Flat Washers
and H9 Lock Washers as shown in FIGURE 1.
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
FIGURE 1
FIGURE 2
PARTS REQUIRED
8pcs - H2 Allen Head Bolt
8pcs - H5 Flat Washer
8pcs - H8 Lock Washer
2pcs - P8 Cabinet Support Plate
1pc - P1 Main Cabinet
Do not tighten H1 bolts, Snug tighten only.
H2 H8
P1
P8
H5
H1
H4
H7
P1
P3
P2
P2
Tighten H2 Allen Head Bolt using T1 Allen Wrench.
P3

PARTS REQUIRED
4pcs - P7 Leg Cross Support Plate
2pcs - P4 Leg Cross Support 16pcs - H5 Flat Washer
8pcs - H6 Hex Nut
8pcs - H8 Lock Washer
8pcs - H2 Allen Head Bolt
Align the holes on the P7 Leg Cross Support Plates with the predrilled holes on the P4 Leg
Cross Support. Attach the P7 Leg Cross Support Plate onto the P4 Leg Cross Support
using the H2 Allen Head Bolts, H5 Flat Washers, H8 Lock Washers , H6 Hex Nuts as shown
in FIGURE 3.
STEP 4
STEP 3
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
FIGURE 3
FIGURE 4
Tighten all leg bolts now using T1 Allen Wrench---tight.
Attach the STEP 3 Assembly to the P2 Leg A and P3 Leg B with the H2 Allen Head Bolts,
H5 Flat Washers and H8 Lock Washers as shown in FIGURE 4.
PARTS REQUIRED
STEP 3 Assembly 8pcs - H2 Allen Head Bolt
8pcs - H5 Flat Washer 8pcs - H8 Lock Washer
P3
Tighten H2 Bolts using T1 Allen Wrench.
Tighten H6 Hex Nut using T2 Hex Wrench.
P3
P4
P2
P2
H6
H5
H5
H2
H2
H8 H5
H2
H8
H5
H8
P7
P7
P4

4pcs - H5 Flat Washer
2pcs - H6 Hex Nut
2pcs - H8 Lock Washer
2pcs - H2 Allen Head Bolt
Attach the P5 Turnbuckle Support onto the P7 Leg Cross Support Plate using H2 Allen Head
Bolts, H8 Lock Washers, H5 Flat Washers and H6 Hex Nuts as shown in FIGURE 5.
FIGURE 5
Thread P9 Leg levelers to legs as shown in FIGURE 5.
STEP 5
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
PARTS REQUIRED
2pcs - P6 Turnbuckle Support
4pcs - P9 Leg Leveler
Tighten H2 Allen Head Bolt using T1 Allen Wrench.
Tighten H6 Hex Nut using T2 Hex Wrench.
NOTE:
Do not tigten the turnbuckles, snug
tighten only.
P9
H2
P6
H5
H8
H5
P7
P7
H5H8
H2
H6
H5
H6

PARTS REQUIRED
16pcs - H4 Phillips Round Head Screw
2pcs - P5 Leg Panel
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
STEP 6
Attach the P5 Leg Panel onto predrilled hole the P2
Leg A and P3 Leg B using H4 Phillips Round Head
Screws as shown in FIGURE 6.
P5
H4
P5
P3
P2
P2
P3
H4
H4
FIGURE 6
Tighten H4 Screws using the Phillips Screwdriver.

CARE AND USE OF YOUR TABLE
1. Use spray furniture polish to clean all exterior surfaces of your table.
3. This product is intended for INDOOR use only.
4. DO NOT sit, climb or lean on the table.
5. DO NOT drag the table when moving it. This will damage the legs.
Congratulations! You have now assembled your table. Please note the Care
and Use instructions below to insure many years of trouble free use of your game
table.
6. DO NOT set drinks on the table.
7. The purchase of a table cover will both protect and help keep clean the
8.
Use a carpenters level to properly level the table using the leg levelers.
entire top of the table.
Description Qty.
H1
H2
H3
H4
T1
P1
P2
P3
P4
P5
P7
P8
P9
Key # Part #
PRODUCT PARTS LIST FOR MODEL # AL3020W/F
AL3020MWH1
AL3020MWH2
AL3020MWH3
AL3020MWH4
AL3020MWT1
AL3020MWP1
AL3020MWP2
AL3020MWP3
AL3020MWP4
AL3020MWP5
AL3020MWP7
AL3020MWP8
AL3020MWP9
5/16’’ x 1-1/2’’ Allen Head Bolt
1/4’’ x 1-3/4’’ Allen Head Bolt
4mm x 32mm Phillips Round Head Screw
Allen Wrench
Main Cabinet
Leg A
Leg B
Leg Cross Support
Leg Panel
Leg Cross Support Plate
Cabinet Support Plate
Leg Leveler
12
26
16
H5 AL3020MWH5
5/16’’ Flat Washer 12
H6 AL3020MWH6
1/4’’ Flat Washer 36
H7 AL3020MWH7
1/4’’ Hex Nut 10
H8 AL3020MWH8
5/16’’ Lock Washer 12
1/4’’ Lock Washer 26
1
T2 AL3020MWT1 Hex Wrench 1
1
2
2
2
2
P6 AL3020MWP6 Turnbuckle Support 4
2
2
4
K1
M1
AL3020MWK1
AL3020MWM1
Hardware Kit
Owner's Manual
1
1
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
A1
A2
A3
AL3020MWA1
AL3020MWA2
AL3020MWA3
Billiard Ball Set
Pool Cue
Triangle
1
2
1
A4 AL3020MWA4 Cue Chalk 2
A5 AL3020MWA5 Playfield Brush 1
2. Use the table brush provided to clean the cloth on the table.

This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS
Product (hereinafter referred as the "Product").
This Product is warranted to the original owner, for a period of 90 days from the
original purchase.
ESCALADE SPORTS warrants to the original owner, this product to be free
from defects in material and workmanship when used for the intended purpose under normal use and
conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT,
UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS
PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL
AND WORKMANSHIP.
During the above 90 day warranty period, ESCALADE SPORTS shall
provide replacement components or replace with a comparable product at our choosing. If product is
defective under normal use and proper care, please contact our Customer Service Dept.
Other than shipping requirements no charge will be made for such replacement of in-warranty Products.
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.
WARRANTY DURATION:
WARRANTY COVERAGE:
WARRANTY REPLACEMENT:
LEGAL REMEDIES:
1-888-996-2729 / Customer Service Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Customer Service Dept.
Or E-mail us at:
[email protected]
ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
ABOVE 90 DAY PERIOD. ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF
USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,
EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
WARRANTY DISCLAIMERS:
90 DAY LIMITED WARRANTY
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
11
All Rights Reserved.