American legend Al6069f User manual

1-888-996-2729

FAX: 1-866-873-3535

gameroom@escaladesports.com

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Or write to:

When contacting Escalade Sports please provide your model number, date code (if

applicable), and part number if requesting a replacement part. These numbers are

located on the product, packaging, and in this owners manual.

Your Model Number:

Please have your model number when inquiring about parts.

Date Code:

Purchase Date:

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

AL6069F

2-AL6069 - -WJ

Mailing Address: (Correspondence Only)

Escalade Sports

PO Box 889

Evansville, Indiana 47706-0889

Physical Location:

Escalade Sports

817 Maxwell Ave.

Evansville, Indiana 47711

V.1

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO CAPABLE

ADULTS ARE REQUIRED TO ASSEMBLE THIS GAME TABLE.

NOTICE :

Make sure you understand the following tips before you begin to assemble your game table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

Assembly Tips

Tools Required: Furniture Polish and Soft Cloth,

Phillips Screw Driver,

Allen Wrench (included),

Carpenters Level, (8 pcs AA Batteries not included)

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

3. Assembly can be made both simpler and less timely by first unpacking all parts , and

matching and organizing them to the Parts Identifier . This will greatly help you become

familiar with the parts before and during assembly .

4. Some of this assembly can be made easier – by placing the parts and building the assembly

on a pair of saw horses . A table can be used also as long as the top is well protected from

any scratches that could occur. The table or saw horses would need to be structurally strong

enough to support this weight.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS AMERICAN LEGEND 3-IN-1 SWIVEL TABLE

WITH UNDER-GLOW LED LIGHTS

HARDWARE IDENTIFIER

(To Scale)

#18 #19 #20 #21

#45

1-1/4” Phillips Washer

Round Head Screw

(20 pcs)

3/4” Phillips Flat

Countersunk Head Screw

(16 pcs)

1-3/4” Phillips Flat

Countersunk Head Screw

(82 pcs)

1/2” Phillips Round

Head Screw

(8 pcs)

#22 #23 #24 #25

5/16” * 1-1/2”

Allen Head Bolt

(16 pcs)

20mm

Hex Bolt (Pivot bolt)

(2 pcs)

20mm

Flat Washer

(4 pcs)

5/16”*19mm

Flat Wahser

(16 pcs)

#53 #54 #55

1/4” * 1”

Allen Head Bolt

(8 pcs)

1/4”*19mm

Flat Washer

(8 pcs)

#28 #43

For Pivot Bolts

Wrench

(1 pc)

3/4” Phillips Round

Round Head Screw

(8 pcs)

20mm Plastic Washer

(2 pcs)

(Not to Scale)

Used together

(Not to Scale)

#47

Allen Wrench

(1 pc)

(Not to Scale)

#52

1-3/4” Phillips Washer

Round Head Screw

(12 pcs)

1/2”*9mm Lock Washer

(8 pcs)

#56

13/32”*7mm Lock Washer

(8 pcs)

With Air Motor

33-5/8”×11-3/4”

33-5/8”×4-1/4”

28-1/4”×4-3/16” 5”×5” 6”×2-7/8” 74”×3-1/2”

23-3/4”×1-7/8”

42-1/2”×5”

33-5/8”×5”

(Packed in Hardware Kit)

28-5/8”×15-1/4” 28-5/8”×15-1/4”

Miter Cut

Leg Leg

Mitre Cut Mitre Cut

Leg

With Felt Attached

Anti Sag Table Tennis

Playfield Support Board

Used together

Packed under main cabinet

Leg slip in panel

Cue Tip Chalk

2 Pieces

Factory Attached

PARTS IDENTIFIER

(Not to Scale)

#1 #2 #3 #4 #5

#6 #7 #8 #9 #10

#11 #12 #13-R #14-R #15

#16 #17 #26 #27 #29

#30 #31 #32 #33 #34

#35 #36 #37 #38 #39

#40 #41 #42 #44

Outside Lower Apron

With LED Strip +Battery Box

(2 Pieces)

18-5/8”×5-3/4”

IMPORTANT NOTE: BEFORE INSTALLING PLAYFIELD SCREWS - PLEASE BE SURE ALL

PARTS HAVE BEEN REMOVED FROM INNER CABINET AND AIR MOTOR CORD IS BROUGHT

THROUGH THE HOLE IN SIDE PANEL.

Air Motor Cord

With the help of another adult, carefully reinstall the hockey table playfield (#2) onto the main cabinet and attach using

Screws (#18).

Attach the plastic Rub Strips (#42) to the ends of the Cabinet with Screws (#43).

Tighten,but do not strip out Screws #18 and #43.

Remove all components from the carton. Note: Parts are packed inside the table cabinet. Remove the Hockey Table

Playfield (#2). Inside the table cabinet you will find all the parts needed to assemble your table. Remove all parts.

IMPORTANT, be sure to feed the plug end from the fan motor through

(Both ends of table)

the hole in the side apron.

Step 1

2Fan Motor

Carefully stand the air hockey playfield on edge while removing parts.

Do not lay playfield down onto the air motor.

(under the hockey playfield)

IMPORTANT NOTE:

Do not run cord through Side Pocket hole.

Use Pilot holes to attach

#42 plastic rub strips Use holes beside the Side Pocket.

Also, make sure air motor cord is not pinched

as the hockey playfield is reinstalled.

Stick on Cord Holder

Table Tennis Playfield

Cushion

12 Pieces

Note: Be careful to remove all

Note: Leg levelers

could be packed

in the four corners packing materials and such as

to insure air motor fan does

not get stopped up with

packing debris.

Used together

NOTE: READ + STUDY ALL ASSEMBLY TEXT, DIAGRAMS AND DIAGRAM NOTES.

IMPORTANT: Press Air Hockey Playfield Down Tight While Installing each (#18) Screw

TT playfield holder

board

2 Pieces

TT holder connector

Block

4 Pieces

TT playfield holder

support board

2 Pieces

#46 #48 #49 #50 #51

39-3/8”×3” 39-3/8”×2” 7-3/8”×3”

Remove backing and stick the end panel inner

cushions (#44) to the each of the end panels (#3).

Attach 2 Latch/locks (#5) into the Leg Top End

Panel (#3) pre-cut holes with Screws(#19).

Carefully fold and attach the puck catcher box (#4)

with Screws (#20) using the predrilled holes.

Add a small amount of wood glue into miter grooves

before folding.

Tighten, but do not strip screws (#20 & #19).

Repeat this step for the other end panel.

Screw the Steel Brackets (#8) onto the bottom of the Ball

Storage Board (#7) using the pilot holes and Screws (#21).

Now attach the Ball Storage Board (#7) to the leg pedestal

using the predrilled holes and Screws (#20).

Tighten, but do not strip screws (#20) and (#21).

Repeat these steps for the other end panel

(#3)

Step 3

Screw the end panel support board (#6) to the leg top

end panel (#3) using screws (#20) into predrilled holes.

Tighten,

Countersinks

lower side

but do not strip screws (#20).

FIG:2A FIG:2A

FIG:2B

Note: Edge of the Steel

L-Brackets (#8) must be

flush with edge of the

Ball Storage Board (#7).

NOTE TO CUSTOMER:

The purpose of the (#44)

end panel inner cushions

is to offer a more stable

playfield during play

Right

Wrong

Brace this side

NOTE: CORRECT

ORIENTATION

NOTE: Oval opening

is on lower side.

Brace this side

Install 2 pcs (#8)

L-brackets as

per diagram Use pilot

holes to Install

Will be here

Peel and Stick

FIG:2A

Cut Out

Top Side NOTE:

Inner brace

this back side

NOTE: BE SURE

TO USE THE

CORRECT

LOWER TWO

HOLES

Step 2

NOTE: Be sure mitered grooves are free of

any dust or debris before folding.

Carefully slide leg Panel (#11) into grooves in the leg (#9). Make flush, leg + leg panel, at the top of the leg.

Attach

FIG:4C

FIG:4A

FIG:4B

the

Do not Forget to attach L-brackets #8

using screw both sides (#21).

FIG:4A

9&10

9 10

Slowly and carefully

remove protective tape

from all corners when

leg assembly is complete

Laminate

side out

Right

hand

here

IMPORTANT

Left

hand

here

All flush

when complete

Grooves NOTE:

4 Pilot Noles

NOTE:

4 Holes in part 12

base board must align

with the leg’s predrilled holes

NOTE:

Handle each leg with care

Carefully Fold

Flush all sides

from glue.

IMPORTANT:

With help from a second adult.

bolt

attach

mitered

the

Repeat procedure for the other end panel.

14-R 20

14-R

13-R

Note: Do not worry

about unused screw holes

Countersinks this side

Counter sinks in predrilled

holes must face outwards

Battery box

On each apron

This screw

hole to top

Step 7

Unscrew and remove cover.

- Insert 4 AA Batteries

- Return cover and insert Screw.

ABC

Remove the screw using a small phillips screwdriver and open the battery box, Insert (4) AA batteries (not

included) in the order of polarity as shown on the inside of the battery box. Then close using the same

screwdriver. Turn on the power by pushing the on/off switch on the battery box to the “ON” position.

(If the game will not be used for a long period of the time, we recommend that the batteries be removed)

ON/OFF

SWITCH

(Batteries not included).

Make sure polarity is correct

See” FIRST TIME BATTERY INSTALLATION AND NOTICE “ , before installing batteries, located on page 16.

,Using the #47 Allen Wrench

14-R

Note: When this assembly is complete,

it would be best to place it where it will

set in your room.

Keep in mind an A/C outlet for the air

hockey air motor cord.

WITH THE HELP OF ANOTHER ADULT

#55

Lock washer

Step 8

56 53

Assemble TT playfield holder board #49 and TT holder support board #50 using screws #20.

Attach

TT holder connectors

#51 using screw #52. Assemble 2 identical assemblies

Do not strip out screws.

Attach the TT playfield holders to the frame by threading the #53 bolts with #54 washers and #56

lock washer tighten tight. Using the #47 Allen Wrench.

Predrilled holes

WITH THE HELP OF A SECOND ADULT:

Predrilled holes

Frame

#56 Lock washer

Step 10

Step 9

NOTE:

Pre installed steel

inserts for #53 bolts-tighten.

But do not over tighten.

NOTE:

It can be helpful to do a “preliminary level” on the frame now.

Use the leg levelers as required.

Note: Place main cabinet into frame, Air

Hockey up and cord close to a wall outlet.

Note: Bolt #23 will start into the wood

of the End Panel. Be sure to keep turning

the bolt until it is well started into the

metal insert.

Preparing the pool / air hockey main cabinet for placement into the frame.

The factory installed threaded inserts in the main cabinet inside of each end (#1) cannot be removed,

Second, install pivot bolts (#23) into the metal threaded inserts in the ends of the main cabinet.

First, slide 2 pcs 20mm washers (#24) and plastic washer (#45) onto the 20mm hex bolt (#23) as seen below.

Screw the bolt into the steel insert leaving approx 1-1/2 of the hex bolt exposed when the bolt is secured into the

steel threaded insert.

Placing the pool / air hockey cabinet to the base frame: NOTE: USE CAUTION NOT TO PINCH FINGERS.

You are now ready to place the main cabinet (#1) onto the base frame. With the help of 4 to 5 other adults, have two adults

on each side of the table top, and the others on the ends to help guide the hex bolts (#23) into the slots on the leg pedestals .

Once in place, make sure the head of the hex bolts (#23) and the 20mm washer (#24) are sticking out past the leg panel.

Make sure the plastic washer (#45) is against the main cabinet (#1) as it will act as the spacer for the table to rotate freely.

To secure the table top to the leg panel use the wrench (#28) provided. Tighten each of the 20mm hex bolts (#23) on each

end of the leg panel, snug tighten only. This will lock the table top to the base frame, and still allow the table top to rotate

freely. When rotation is complete, engage all 4 latch/locks.

Main Cabinet

CAREFULLY LIFT THE MAIN CABINET FROM EACH SIDE (NOT ENDS) TO PLACE THE INTO THE END PEDISTAL LEGS

4 TO 5 CAPABLE ADULTS REQUIRED!

Plastic

washer #45

#24 Pilot bolt

#23

Cabinet

Steel flat washer

each side

Cradle End apron

Step 11

(Heavy)

PEEL & ATTACH

Peel the backing off the Cord Clip (#48) and attach to a side of the table.

，

Note: Push excess cord back into

hole when not in use. Gently pull

out as needed.Be careful not to

create a trip hazard.

Note: Always make sure the cord is in this storage position

before rotating the main cabinet.

Note:

On/off fan

switch is

located

on the fan

cord

Note: #36 Hockey striker felt could be installed by factory

Step 12

Puck opening here

Note: Most all table accessories can be

Store Table Tennis

playfield Tops Here

Note: Always make sure all (4) latch/locks are correctly locked in place during

the leveling process and during any play.

Lastly, using a carpenters level and (4) leg levelers - level the table for best play.

stored inside the ends of the table.

Battery box with

on/off switch for

under-glow LED

lights. Always

turn LED lights

off when play is

completed.

Use #46 table tennis top

cushions as required

cabinet top.

pcs

main cabinet!Table

Step 13

Clip on

Plug in and turn on air motor to play. Turn off and unplug when not playing.

Never allow cord to become a trip hazard.

Always unplng + store the air motor cord before rotating main cabinet.

NOTE: Remove all billiard balls from the playfield pockets before rotating the billiards table.

Notice:

Always remove and store the table tennis playfields before rotating the

main cabinet.

Notice:

CARE AND USE OF YOUR SWIVEL TABLE

3. Use spray furniture polish to clean all exterior surfaces of your game table.

4. Use the Billiards Playfield brush provided to clean the cloth on the billiards table.

5. Use a carpenters level to properly level table using the leg levelers.

rofdednetnisitcudorpsihT ROODNI .ylnoesu

.8 DO NOT

DO NOT

It is suggested that this table be placed close to a wall thus allowing the air motor

cord to NOT be a trip hazard. Always turn air motor off when table is not in use.

.elbatehtnonaelrobmilc,tis

.10

11.

If possible, cover table with a pool table cover or sheet when not used to

keep playfield clean preventing any dust build up.

12.

Clean the table tennis playfield with a soft, slightly damp (water) cloth.

Do not use furniture polish.

13.

This will damage the legs..tignivomnehwelbatehtgard

.elbatehtnosknirdtes

For long life and best play from your swivel table, apply spray furniture polish to clean

cloth and wipe down the hockey playfield with air motor running to make the pucks.

slide faster before first play and frequently thereafter.

7. DO NOT operate the air motor if the cord is damaged in any way.

Congratulations! You have now assembled your Swivel Table. Please note the Care and Use instructions below

to ensure many years of trouble free use of your Swivel Table.

Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.

First Time Battery Installation:

Locate battery compartment for this product .

Use alkaline batteries for maximum performance .

Using a small Phillips head screwdriver – loosen and remove the battery compartment cover

screw(s).

Remove battery compartment cover .

Install new batteries only after reading the “ Battery Information NOTICE“ !

Replace compartment cover and secure cover with the cover screw . Do not over tighten and

strip out the screw .

IMPORTANT: BATTERY INFORMATION

Please retain this information for future reference. Batteries must be installed / replaced by an adult .

Notice:

1. Remove and replace batteries when the electrical features of this product work slowly or are not

functional .

2. Do not mix old and new batteries .

3. Do not mix different types of batteries : Alkaline , Standard ( Carbon-Zinc) , or rechargeable

( Nickel-Cadmium batteries ) .

4. Use Alkaline Batteries for maximum performance .

5. Do not use damaged batteries .

6. Use only batteries of the same or equivalent type as recommended.

7. Install new batteries as per matching the battery polarity guide ( + & - , positive and negative ) inside

of the battery compartment . Correct battery polarity installation is critical as to not damage the internal

electrical components as well as insuring the correct functionality of the product .

8. Do not short circuit the battery terminals .

9. Always remove exhausted , leaking, weak , and batteries from long periods of nonuse from the

product . Battery leakage and corrosion can cause damage .

10. Check the battery terminals are clean and bright before installing new batteries.

11. Dispose of old batteries safely and per local battery disposal codes .

12. Do not dispose of batteries into a fire as they may explode or leak.

13. If removable rechargeable batteries are used , they are to be charged under adult supervision .

14. Rechargeable batteries are to removed from the product before they are charged .

15. If you use a battery charger, it should be examined regularly for damage to the cord , plug, enclosure,

and other parts. Do not use a damaged or malfunctioning charger until it is properly repaired.

16. Non rechargeable batteries must not be recharged .

17. Always remove batteries from this product for extended storage and or non-use .

18. Should this product cause , or be affected by, local electrical interference , move it away from other

electrical equipment . Reset ( switching off and back on again and or removing and reinserting the

batteries ) if necessary .

Spare Parts List

13-R

14-R

1 AL6069WJ1 Cabinet- Billards

Playfield-Hockey with air motor

Leg Top End Panel

Puck Catcher Box

Latch/ Lock

End Panel Support Board

Ball Storage Board

Steel L-Bracket

Right Leg

Left Leg

Leg Panel

Leg Base Board

Outside Apron- End Board

Outside Lower Apron with

LED light strips+battery box

Top End Panel

Table Tennis End Playfield

Table Tennis Middle Playfield

1-1/4”Phillips Washer Head Screw

3/4” Phillips Flat Head Screw

1-3/4” Phillips Flat Head Screw

1/2” Phillips Round Head Screw

5/16” * 1-1/2”Allen Head Bolt

20mm Hex Bolt

(Pilot bolt)

20mm Pivot Washer

5/16”*19mm Washer

Leg Leveler

Wood Glue

For Pivot Bolts Wrench

Tennis Top- Support

Billiard Balls

Cue Stick

Triangle

Chalk

Pool Playfield Brush

Hockey Striker

Hockey Striker Felt Pad

Hockey Puck

Table Tennis Net Post

Table Tennis Net

Table Tennis Paddle

Table Tennis Ball

Plastic Rub Strip

3/4” Phillips Round Head Screw

End Panel Inner Cushion

20mm Plastic Washer

Table Tennis Top Cushion

Allen Wrench

AL6069WJ2

AL6069WJ3

AL6069WJ4

AL6069WJ5

AL6069WJ6

AL6069WJ7

AL6069WJ8

AL6069WJ9

AL6069WJ10

AL6069WJ11

AL6069WJ12

AL6069WJ13R

AL6069WJ14R

AL6069WJ15

AL6069WJ16

AL6069WJ17

AL6069WJ18

AL6069WJ19

AL6069WJ20

AL6069WJ21

AL6069WJ22

AL6069WJ23

AL6069WJ24

AL6069WJ25

AL6069WJ26

AL6069WJ27

AL6069WJ28

AL6069WJ29

AL6069WJ30

AL6069WJ31

AL6069WJ32

AL6069WJ33

AL6069WJ34

AL6069WJ35

AL6069WJ36

AL6069WJ37

AL6069WJ38

AL6069WJ39

AL6069WJ40

AL6069WJ41

AL6069WJ42

AL6069WJ43

AL6069WJ44

AL6069WJ45

AL6069WJ46

AL6069WJ47

48 Cord Holder 1

AL6069WJ48

AL6069

49 AL6069WJ49 TT playfield holder board

TT playfield holder support board

TT holder connector Block

1-3/4” Phillips Washer Head Screw

1/4"*1"Allen key bolt

1/4"*19mm Washer 8

AL6069WJ50

AL6069WJ51

AL6069WJ52

AL6069WJ53

AL6069WJ54

1/2”*9mm

Lock Washer

AL6069WJ55

13/32””*7mm Lock Washer

AL6069WJ56

Spare Parts List AL6069

This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS

Product (hereinafter referred as the "Product").

WARRANTY DURATION: This Product is warranted to the original consumer purchase of a pe-

riod of 90 days from the original purchase.

WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser

that any Product of its manufacture is free from defects in material and workmanship when used

for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE

PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,

IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PROD-

UCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMAN-

SHIP.

WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS

shall repair or replace with a comparable model, and Product, or component thereof, which may

prove defective under normal use and proper care, and which our examination shall disclose to

our satisfaction to be thus defective, please contact our Warranty Dept.

1-888-996-2729 / Warranty Dept.

Or Write us at:

Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706

Attn: Warranty Dept.

Or E-mail us at:

[email protected]

Other than shipping requirements no charge will be made for such repair or replacement of in-

warranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for

value prior to mailing.

WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF

THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM-

ITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS

SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER

CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES IN-

CURRED BY THE CONSUMER OF ANY OTHER USE.

Some states do not allow the exclusion or limitation of implied warranties or consequential or

incidental damages, so the above limitations or exclusions may not apply to you.

LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other

rights which may vary from state to state.

90 DAY LIMITED WARRANTY

Table of contents

Other American Legend Video Gaming Accessories manuals

American Legend

American Legend HT600 User manual

American Legend

American Legend 45-1800W/F User manual

American Legend

American Legend AL2100W User manual

American Legend AL6069F User manual

Popular Video Gaming Accessories manuals by other brands