American Specialities, Inc. 0199 User manual

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SPECIFICATION
ADA Compliant Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam
reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal
protection. Unit shall develop 60 CFM (102 m3/h) of heated air and shall provide drying time of less than 15 seconds.
Cover shall be heavy-duty, one piece formed 18 gage stainless steel bright or satin finished on all exposed surfaces (by
option specified) or heavy-duty, one piece formed 18 gage steel finished on all exposed surfaces with white porcelain
enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not
allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a
microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity
over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have C-UL-US®and CE
approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against
defects in materials or workmanship for five (5) years. Complete Owner’s Manual (OM) and Installation Guide (IG) shall be
provided with unit.
ADA Compliant Surface Mounted High-Speed Hand Dryer shall be Model №0199 of American Specialties, Inc., 441
Saw Mill River Road, Yonkers, NY 10701-4913
INSTALLATION
Surface mount unit on wall with four (4) 1/4" washers and screws or bolts (supplied) through holes (provided) in a corrosion
protected steel back plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to
suit wall conditions. Electrical service is supplied and connected (by others) prior to installing cover. Cover is secured to
back plate with recessed, pin-hex pan head cap screws (supplied) opened with security wrench (supplied). For compliance
with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards for adults install unit with bottom of sensor lens
48" (1219) maximum above finished floor (MAX AFF) if unobstructed reach access is provided or 44" (1118) MAX AFF if
forward reach over an obstruction (e.g. vanity or commode) with reach depth greater than 20" (508) and less than 25" (635)
is only provided. For general utility install unit so that sensor lens is 44" to 54" (1118 to 1372) AFF. Mounting Template and
Installation Guide (MT & IG) is supplied with unit.
ADA COMPLIANT SURFACE MOUNTED HIGH-SPEED DRYER ( 1 OF 2)
MODEL №: 0199
ISSUED: 10/12
REVISED: 03 Oct 2013

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
RATINGS
MODEL TYPE AIR Velocity TIMING
SAFETY
VOLTS AC
FREQUENCY Hertz AMPS WATTS
x1000
*
COLOR
0199-1
Hand
Automatic
60 second
Shut-Off
110 – 120 • 50/60 10.4
Max 0.84-1.0 Standard
White
Optional
SS Bright
SS Satin
0199-2 208 – 240 • 50/60 5.2
Max 0.75-1.0
0199-3 277 • 50/60 5.2
Max 1.0
150 ~ 230
ft/S
45.5
~ 70 m/s
ADA COMPLIANT SURFACE MOUNTED HIGH-SPEED DRYER ( 2 OF 2)
MODEL №: 0199
ISSUED: 10/12
REVISED: 03 Oct 2013
OPERATION
Activate dryer by placing hands under sensor. Dryer automatically shuts off after user removes hands from sensor zone.
Complete OM and MT-IG are supplied with unit for future reference of Installation Requirements, Operating Conditions and
Service.
COLOR OPTION*
Unit is supplied with white finish unless color option is specified. Specify optional cover Bright or Satin Stainless Steel by
adding appropriate code number suffix to standard model number (e.g. 0199-1-92 or 0199-1-93).
MOTOR H/P RPM
x1000
FAN
TYPE HEATING ELEMENT CFM
m3/h
AIR OUTPUT
TEMPERATURE
Brush Type
Dual Ball
Bearings
0.67 16-29
(ADJ)
Multi-Inlet
Centrifugal
325-450Watt with auto reset
circuit breaker
Range Adjustable by Owner
42-60
(71-102)
131oF ± 5@ 77oF
(55o C ±2.8 @ 25o C)
Ambient room temp
Net Wt Ship Wt DRYING TIME SENSING RANGE SAFETY Water Protection
8.4 Lbs
3.8 kg
9.2 Lbs
4.2 kg
Less Than
15 seconds
Standard = 6" ± 25/32"
(152 ± 20)
C-UL-US®,
CE
Drip Proof
IP23
SENSOR
TYPE
DRYING
PERSISTENCE
MOTOR THERMAL
PROTECTION
HEATER THERMAL
PROTECTION
SOUND
PRESSURE
IR
780 nm
Self-
adjusting
Automatic
2 second Hold-On
Shut-Off delay
120v Shut off @ > 275 °F
{> 135 °C}
240v Shut off @ > 203 °F
{> 95 °C}
Shut off @ > 185 °F
{> 85 °C}
Reset on @ < 167 °F
{< 75 °C}
dB-A @ 2M
68.9 Minimum
74.3 Maximum