American Standard Evolution 2645V User manual

H97
© 2008 AS America Inc.
EVOLUTION™ OVAL
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ 5-1/2 Foot Apron: 9266.018.XXX (specify color)
❏ Safe-T-Heater Whirlpool Heater: 9075.120
❏ Tile Bead Kit: 751755-100
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: Whirlpool Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
EVOLUTION™ OVAL
❏ 2645VC Whirlpool w/EverClean® System
• EverClean® System
• Acrylic with berglass reinforcement
• 1.4 HP single speed, self-draining pump/motor
• Six adjustable Comfort Jets™
• Molded-in lumbar back rest
• Side-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
• Self leveling feet
• Undermount installation option
• Quick connect whirlpool heater system
(must order whirlpool heater separately)
❏ 2645V Whirlpool
• Same as above except without the EverClean
❏ 2645V.002 Bathing Pool
Nominal Dimensions:
66" x 36" x 19-3/4"
(1676 x 914 x 502mm )
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
* See American Standard Faucet Selector

H98
© 2008 AS America Inc.
EVOLUTION™ OVAL
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY
OTHERS.
■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9266.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
66 x 36 x 19-3/4 In.
(1676 x 914 x 502mm)
96 Lbs. (44 Kg.)
580 Lbs. (263 Kg.)
58 Gal. (219 L)
42 Gal. (159 L)
49 x 26 In. (1245 x 660mm)
62 X 32 In. (1575 x 813mm)
12-3/4 In. (324mm)
35 Lbs./Sq.Ft. (171 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2645V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.PUMP
36"
(914mm)
19-3/4"(H)
(502mm)
18-1/4"(C)
(464mm)
C/L OF
DRAIN
15-1/4"(A)
(387mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
66"
(1676mm)
5-3/8"
(137mm)
6"
(152mm)
36"
(914mm)
8-1/4"
(210mm)
3"
(76mm)
11-1/4"
(286mm)
1-3/4"
(44mm)
18"
(457mm)
CUT OUT IN FLOOR
FOR DRAIN
2645V
Whirlpool shown
GENERAL SPECIFICATIONS FOR 2645V BATHING POOL
66 x 36 x 19-3/4 (1676 x 914 x 502mm)
81 Lbs. (37 Kg.)
565 Lbs. (256 Kg.)
58 Gal. (219 L.)
49 x 26 In. (1245 x 660mm)
62 x 32 In. (1575 x 813mm)
12-3/4 (324mm)
34 Lbs./Sq.Ft. (167 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)