American Standard Green Tea 3572.328 User manual

H13
© 2008 AS America Inc. Rev. 2/08

❏ 
• Smooth Air™ Massage System with perfectly smooth
air jets throughout tub bottom
• Programmable automatic purge with timer
• 1.0 hp variable speed blower with built-in heater
• Everclean® System
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• Form-tted backrest and raised neck support
• Dual, molded-in armrests
• Can be under-mount installed
• Drain and overow in Chrome included
❏ 

Same as 3572.328 but also includes:
• Two digitally controlled lights
• Electronic control with color selector and
color cycle function

66" x 36" x 22"
(1676 x 914 x 559mm)


• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion additive
right into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could cause
deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS




❏ Color
❏ Bath Filler: (specify nish)
❏ Bath Drain: (included in Chrome)

❏ Universal Tile Bead Kit: 751755-100
❏ Drain Trim Kit: 1585.200 (specify nish)
❏ Air Blower Remote Mounting Kit: 754025-0071A
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.

H14
© 2008 AS America Inc. Rev. 2/08



22 AIR JETS
PROVIDE ACCESS TO BLOWER FOR
SERVICE ON ALL INSTALLATIONS
GREEN TEA 5-1/2' x 36"
MODEL 3572.328
66
(1676mm)
36
(914mm)
11-1/2
(292mm)
14-3/4
(292mm)
BLOWER
C
L
CUTOUT IN FLOOR FOR DRAIN
9
(229mm)
OUTLINE OF CUTOUT 64.5 x 34.5 (1638 x 876mm)
CONTROL
PANEL
66 x 36 x 22 In. (1676 x 914 x 559mm)
100 Lbs. (45 Kg.)
592 Lbs. (269 Kg.)
59 Gal. (223 L.)
44 Gal. (167 L.)
19 x 49 In. (483mm x 1245mm)
54-1/2 x 27 In. (1384mm x 686mm)
14 In. (356mm)
36 Lbs./Sq. Ft. (175 Kgs/Sq. m.)
25.6
45.1
GENERAL SPECIFICATIONS FOR 3572
AIR BATH SYSTEM
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
ELECTRICAL SPECIFICATIONS
1.0 HP, 10 AMPS, 120V.BLOWER
LEVELING STRINGER NOT
FOR SUPPORT
ROUGH
FLOOR
1-1/2" O.D. TAILPIECE
508mm
(20")
INTEGRAL FEET
WITH ATTACHED
BASEBOARD
51mm
(2")
559mm
(22")
1-1/2" N.P.T.M. THREADS 35mm
(1-3/8")
98mm
(3-7/8")
C
LTO OVERFLOW
102mm (4")

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.
● FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
 Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.